Sunbeam SKM6100DC DuraCeramic 25cm Skillet User Guide

SKM6100DC DuraCeramic 25cm Skillet

DURACERAMICTM 25CM SKILLET

User Guide

Features of your Sunbeam DuraCeramicTM 25cm Skillet

• Integrated steam vent Fixed steam vent controls the moisture level during cooking.
• Cool touch handle and lid knob For safer cooking and carrying of your skillet.
• Control probe inlet Cast-in element The 1200 watt element is completely cast into the heavy duty base providing superior heat distribution, faster heating and a longer element life.
• Dishwasher safe The pan and base are dishwasher safe and fully immersible making cleaning a breeze.
• Perfect Temp control probe The removable probe is thermostatically controlled to provide accurate cooking temperatures. The trigger-release makes the probe easy to remove.
• 25cm (10″) electric skillet
• DuraCeramicTM non-stick cooking surface Unique DuraCeramicTM natural ceramic non-stick coating is designed to transfer heat quicker and more efficiently than traditional non-stick coatings.
  This means faster cooking times, scratch resistant and 4x more durable than traditional non-stick coatings. PTFE and PFOA free.

Usage Instructions

1. Before using for the first time, wash the skillet and lid in warm soapy water, rinse and dry thoroughly.
2. Place the skillet on a flat, stable surface away from any flammable materials.
3. Insert the Perfect Temp control probe into the control probe inlet on the side of the skillet.
4. Connect the power cord to an electrical outlet and turn the temperature control dial to the desired temperature. The indicator light switches ‘on’ when it is heating.
5. When the skillet has reached the desired temperature, the indicator light switches ‘off’. The indicator light will then cycle ‘on’ and ‘off’ as the thermostat maintains the set temperature.
6. Add your ingredients to the skillet and cook according to the Cooking Guide.
7. When cooking is complete, turn the temperature control dial to ‘off’ and unplug the skillet from the electrical outlet.
8. Allow the skillet to cool before removing the Perfect Temp control probe and cleaning.

Care & Cleaning

• Unplug the skillet from the electrical outlet and allow to cool before cleaning.
• Remove the Perfect Temp control probe from the control probe inlet on the side of the skillet.
• Wash the skillet and lid in warm soapy water, rinse and dry thoroughly. Alternatively, the pan and base are dishwasher safe and fully immersible making cleaning a breeze.
• Store the skillet with the lid slightly ajar to allow air circulation.

Temperature Setting Guide

• Low: 120°C – 150°C
• Medium-Low: 150°C – 170°C
• Medium: 170°C – 190°C
• Medium-High: 190°C – 210°C
• High: 210°C – 230°C

Cooking Guide
Refer to the recipe book for specific recipes and cooking times.
The DuraCeramicTM non-stick cooking surface allows for healthy cooking with minimal oil. The integrated steam vent controls the moisture level during cooking for perfect results every time.

Troubleshooting
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Sunbeam’s Safety Precautions
Follow all safety precautions listed in the manual. Do not touch hot surfaces and do not pull on the cord. If the appliance is damaged, return it to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR DURACERAMIC™ 25cm SKILLET.

• Use your skillet at least 200mm away from walls and curtains.
• Do not immerse the control probe in water.
• If using a plastic spatula do not leave in cooking vessel when hot.
• The skillet must only be used with the control probe provided.
• Avoid using on metal surfaces e.g. sink, hotplate.
• Remove the control probe before cleaning the skillet.
• After cleaning the skillet ensure that the control probe Inlet area is completely dry before using again.

Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:

• Read carefully and save all the instructions provided with the appliance.
• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug – do not pull on the cord.
• Turn the power off and remove the plug when the appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
• Children should be supervised to ensure that they do not play with the appliance.
• Use well away from walls and curtains.
• Do not block or cover the air vents on the top (back/ sides) of the oven.
• Do not use in confined spaces.
• Never leave an appliance unattended while in use.
• Do not use an appliance for any purpose other than its intended use.
• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot curtaro
• Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.
• For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.
• Do not immerse the appliance in water or any other liquid unless recommended.
• Appliances are not intended to be operated by means of an external timer or separate remote control system.
• This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
• Refer to “Care and Cleaning’ section for details concerning precautions during use maintenance.
• Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
• Keep the appliance and its cord out of reach of children less than 8 years old.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Hot Surface Do Not Touch
This symbol indicates, temperature of accessible surfaces may be high when the appliance is operating and for some time after use.

Features of your Sunbeam DuraCeramic™ 25cm Skillet

Parts & Accessories

Trigger-Release Control Probe
The heat control probe is thermostatically controlled to deliver perfect cooking control.
The indicator light switches ‘on’ when it is heating. When the skillet has reached the desired temperature the indicator light switches ‘off’. The indicator light will then cycle ‘on’ and ‘off’ as the thermostat maintains the set temperature.
The heat control probe is ergonomically designed with a handy trigger-release. Simply hold the probe and squeeze the trigger with your thumb to remove it.

Usage Instructions

Before First Use
Before using your skillet for the first time, remove all packaging and promotional materials from the product and control probe.
With the control probe detached, wash with warm soapy water using a mild household detergent.
Rinse thoroughly and dry. Make sure the interior of the probe inlet is fully dry.
Note: Do not immerse the heat control probe in water or any other liquid.

Seasoning
To preserve the ceramic coating of your pan, it is important to season before first use. This process will take around 15-20 minutes.

1. Season the ceramic pan by spreading 1 tablespoon of high smoking oil such as avocado oil, canola oil, or vegetable oil on the base of the Use a clean paper towel or soft cloth to spread the oil evenly on the cooking surface.
2. Heat the skillet to MIN and retain on MIN the whole time for the oil to heat Turn the power OFF once smoke comes out of the pan.
3. Let the pan cool to room temperature and wipe away excess Do not wash.

Using your Skillet

1. Place on a flat, level, heat-resistant surface.

2. Insert the control probe fully into the probe inlet of the

3. Plug the cord into 230-240V power outlet and turn the power

4. Pre heat the skillet on MIN/MED Then set the control probe dial to the desired temperature setting. Refer to page 7 for the temperature guide.
   Note: The thermostat light on the control probe indicates the temperature at which the dial is set. The light will remain on until the set temperature has been reached and then will cycle on and off throughout the cooking. This will ensure that the skillet maintains the correct temperature. On the initial heating of the skillet, it is recommended that the temperature be allowed to cycle (the light cycling on and off) several times. This will help the cooking surface to adjust to a more accurate cooking temperature.

5. After you have completed cooking, turn the power OFF and unplug from the power

Note: Ensure the cord is kept well away from the skillet when in use.

Caution: Do not touch the skillet when in use. Avoid touching hot surfaces. Take care when removing food from the skillet. Do not transport the skillet when it is hot.

Care & Cleaning

Use heat-resistant plastic or wooden or silicone utensils when cooking on the skillet. Avoid using sharp or metal objects as these will scratch the non- stick surface. Do not cut food on top of the cooking surface. Do not leave plastic utensils om contact with the cooking surface while in use.

To clean after use
Always turn the power off and remove the plug from the power outlet and the control  probe from the probe inlet before cleaning.
Allow the skillet to cool before cleaning.

DuraCeramic™ non-stick coating
Due to the natural properties of ceramic coating, your DuraCeramic Skillet requires gentle handling and cleaning. When cleaning the DuracCeramic™ non- stick coating, do not use metal (or other abrasive scourer). It is important to let the skillet cool down. Do not immediately immerse in water. Wipe the bottom of the pan using a damp paper towel to remove residue on the skillet. With the control probe detached and the pan completely cool, wash the pan with warm soapy water using a mild household detergent. Rinse thoroughly and dry the skillet with a soft cloth before storing. Make sure the interior of the probe inlet is fully dry. Staining When using high pigmented ingredients such as turmeric, curry, soy sauce, tomato sauce, some staining may occur. When cooking, always start to use low or medium heat before adding food to the pan. High heat can cause the food to stick, discolour or damage the natural properties of the ceramic coating. Stubborn food residue may be removed or reduced by rubbing the ceramic coating with a cream cleanser or a paste of bicarbonate of soda and water using a clean cloth. Heat Control probe If cleaning is necessary, wipe over with a damp cloth. Note: The control probe must be removed before the skillet is cleaned and the control probe inlet must be dried before the skillet is used again. Important: Do not immerse the control probe in water or any other liquid. Store the crontrol probe carefully. Do not knock or drop it as this can damage the probe. High domed metal lid Wash the lid in warm soapy water using a soft sponge, rinse and dry thoroughly. Metal scourers will scratch the surface and should be avoided. Some food such as tomato paste and curry may stain the surface. This staining may be removed or reduced by rubbing with a cream cleanser or a paste of bicarbonate of soda and water. Note: Do not place metal lid in a dishwasher.

Storage
Store the control probe carefully in a safe place. Do not knock or drop it as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Service Centre for inspection.

Temperature Setting Guide
The settings on the dial represent the following temperatures approximately. Pre-heat your skillet on MAX setting then change to your desired setting.

DIAL SETTING| CELCIUS
(approx)| USES| TEMPERATURE
---|---|---|---
MIN| 50°C – 70°C| Keeping food warm| LOW
MIN/MED| 80°C – 105°C| Simmering, slow cooking|
MED| 120°C – 140°C| Pan frying| MEDIUM
MED/MAX| 150°C – 175°C| Shallow frying, roasting|
MAX| 190°C – 210°C| Searing and sealing| HIGH

Note: The temperature settings are a guide only and may require adjustment to suit various foods and individual tastes. When the dial is set to a MIN setting, it is quite normal for food to stop and start bubbling, as the thermostat maintains the selected temperature

Pan frying: Suitable for eggs, omelettes, bacon, sausages, steaks and chicken pieces. Preheat to MED setting with a little oil to add flavour. Non- stick cooking surfaces do not require a large amount of oil. Steaks should only be turned once during cooking.

Shallow frying: Suitable for vegetable pieces e.g roast pumpkin and potato, and crumbed food. Preheat on MED setting with sufficient oil so that the food is half immersed. Cook food with the lid off.

Sauteeing : Preheat on MED setting with a little oil to add flavour.

Stir frying
Food is cooked quickly, over a high heat and vegetables retain their flavour and crispness. For best results and even cooking, cut food into even sized, smaller pieces.

1. Preheat the skillet on MIN/MED setting with a little oil.
2. Slice meat into strips. Coat meat in a little oil and stir-fry in batches until browned. This prevents meat from stewing.
3. Add vegetables and seasoning, stirring continuously. Vegetables which take longer to cook, such as carrots, should be cooked first, adding the other ingredients later. Cook until the vegetables are crisp. Return the meat back into the pan when the vegetables are almost cooked. The lid can be in position in the last few minutes of cooking.

Roasting
Meat and poultry: The skillet is ideal for roasting meat and poultry, as the meat retains the flavour and juices.

1. Preheat the skillet to MED/MAX setting. Use only a small amount of oil for less fatty joints and no oil for fattier joints of meat.
2. Brown and seal the meat on all sides and position the lid.
3. After browning, turn the dial to MED setting to cook the meat as desired. Turn meat occasionally during cooking to ensure even cooking.
4. Remove meat from pan and cover with foil. Allow meat to rest for 5-10 minutes, meanwhile you can make a gravy from the juices in the skillet.

after browning.

BEEF| 20-25 minutes per 500g after browning.
LAMB| 25-30 minutes per 500g after browning.
CHICKEN| 30-35 minutes per 500g after browning.

Vegetables: Cut into even sized pieces. Add to the skillet 45-60 minutes before serving. For crisper vegetables, remove the meat and increase the heat for the last few minutes of cooking.

Roasting times:
Note: These times are for well done. Reduce the times to suit personal taste.

Recipes

All recipes have been specifically created and tested by the Sunbeam Test Kitchen for the Skillet. We hope you enjoy using your Sunbeam Skillet.

The following recipes are also suitable for your Classic Skillet. Please note that it will be necessary to cook in batches.

Corn Fritters
Makes approx. 20

• 1 cup self raising flour
• ½ teaspoon bicarbonate soda
• ½ teaspoon sweet paprika
• ½ teaspoon ground coriander
• ⅔ cup buttermilk
• 2 eggs
• 2 cups corn kernels
• 1 small red capsicum, diced finely
• 3 small green onions, sliced
• 2 tablespoons chopped fresh parsley
• 1 tablespoon chopped fresh coriander
  Sea salt and freshly ground black pepper Olive oil
  Tomato chilli jam, to serve

1. Combine flour, soda, paprika in a bowl; whisk through buttermilk and eggs to form a batter.
2. Combine corn, capsicum, green onions, parsley and coriander in a large bowl. Stir through the batter; season with salt and pepper.
3. Heat skillet on MED/MAX setting. Drizzle a little olive oil in skillet and spoon tablespoonfuls of mixture into pan. Cook fritters for 2-3 minutes on each side until golden.
4. Serve with tomato chilli jam if desired.

Gyoza (Japanese Dumplings)
Makes approx. 50

• 150g pork mince
• 150g chicken mince
• 2 tablespoons kecap manis (sweet soy)
• 1 teaspoon sugar
• 1 tablespoon mirin
• 1 egg
• 2 teaspoons sesame oil
• 2½ cups Chinese cabbage, shredded finely
• ⅓ cup finely chopped water chestnuts
• 4 green onions, chopped finely
• 50 sheets gow gee wrappers vegetable oil for pan frying
• Dipping Sauce
• 2 tablespoons kecap manis
• 1 tablespoon black vinegar

1. Combine all ingredients in a bowl and mix well.
2. Lay several sheets of gow gee wrappers out onto a bench top. Have a tray lined with baking paper ready to place the prepared gyoza onto.
3. Place a rounded teaspoon of filling into the centre of the wrapper. Moisten the edges with a little water. Fold the wrapper over the filling but before sealing carefully pleat on one side. The pastry will look plain on one side but have a small pleat on the other. Gently press the pastry to seal. Repeat with remaining wrappers.
4. Heat skillet on MED/MAX setting. Heat 1 tablespoon of oil in the frying pan and place the dumplings, in batches, into the pan, pleat side up. Cook until the dumplings are golden on the bottom. Do not turn. Carefully pour enough water in the frying pan so that the dumplings are half covered. Place the lid on the skillet and cook, covered for 1 minute. Remove lid and cook, uncovered, until all the water has evaporated. Remove from pan, repeat with remaining dumplings. Note: The water should be simmering the entire time. If this does not happen increase the heat to MAX setting.
5. Serve with dipping sauce.
   Tip: Kecap manis, mirin and black vinegar are available at Asian grocery stores, or in the international section of supermarkets.

Pan Fried Chicken Breast with Salsa Verde
Serves 6

• 1-2 tablespoons olive oil
• 6 chicken breast fillets

Salsa Verde

• 1 cup fresh flat leaf parsley

• ½ cup dill

• ½ cup fresh mint leaves

• 2 cloves garlic

• 1 tablespoon small capers

• 1 tablespoon grated lemon rind
  Sea salt and freshly ground black pepper

• ¾ cup extra virgin olive oil

1. Heat skillet on MED/MAX setting. Add oil and cook chicken, uncovered, until browned on both sides and cooked through. Remove from heat and serve with Salsa Verde.
2. To make the Salsa Verde, blend or process all ingredients until a chunky sauce texture is achieved.
   Tip: Salsa Verde also goes very well with pan fried fish fillets.

Pan Fried Fish with Garlic and Lemon
Serves 4

• 4 (800g) white fish fillets
• 2 tablespoons olive oil
• 2 cloves garlic, crushed
• 2 tablespoons lemon juice
• 2 eschalots, minced
• ¼ cup shredded fresh basil leaves
  Sea salt and freshly ground black pepper
  Steamed new potatoes or mash, to serve Steamed broccolini, to serve

1. Place fish in a shallow baking dish. In a small bowl combine the garlic, lemon juice, eschalots, basil, salt and pepper and mix well.

2. Pour marinade over fish and allow to sit at room temperature for 20 minutes.

3. Heat skillet on MAX setting. Add oil and cook fish for 3-5 minutes on both sides until just cooked through.
   Note: Cooking time will vary depending on the thickness of each fillet.

4. Serve fish with potatoes and steamed broccolini.

Caramelised Bananas with Hot Chocolate Sauce and Whipped Cream
Serves 4

• 4 large bananas
• ¼ cup firmly packed brown sugar
• 1 teaspoon cinnamon
• Whipped cream, to serve Hot chocolate sauce
• 100g dark chocolate, chopped
• 30g white marshmallows, chopped
• 150ml thickened cream

1. Preheat skillet on MIN/MED setting.
2. Cut bananas in half lengthways, leaving the skin on. Sprinkle the combined sugar and cinnamon over the cut bananas. Press gently into the banana.
3. Place bananas, cut side down and cook, uncovered, for about 6 minutes or until the sugar has caramelised and the banana has softened. Serve bananas with hot chocolate sauce and whipped cream.
4. To make the hot chocolate sauce, combine all ingredients in a small saucepan and cook, stirring, over a low heat, until melted.

Buttermilk Pancakes
Makes 8

• 1 cup self raising flour
• 2 tablespoons sugar
• ½ teaspoon bicarbonate of soda
• 1 egg, lightly beaten
• 2 tablespoons vegetable oil
• 1 cup buttermilk
• 60g butter

1. Sift dry ingredients into a large bowl. Make a well in the centre.
2. Whisk the combined wet ingredients into the dry ingredients until smooth.
3. Heat skillet on MED setting. Melt some of the butter and spoon ¼ cupfuls of mixture at a time into the skillet. Turn the pancakes once the bottom is golden and the tops starts to bubble. Cook until the underside is golden.
4. Serve with extra butter and maple syrup.

Pikelets
Makes approx. 12

• 1 egg
• ¼ cup sugar
• 1 cup self raising flour
• ¾ cup milk
  pinch salt
  butter for frying

1. Beat egg and sugar with an electric mixer until light and creamy.
2. Add flour, milk and salt and beat until smooth.
3. Heat skillet on MED/MAX setting. Melt a little butter in skillet and wipe away any excess with paper towelling.
4. Spoon heaped spoonfuls of batter in skillet and cook on both sides until golden.
5. Serve with butter, jam, cream or chocolate hazelnut spread.

For savoury pikelets: Reduce sugar to 2 tablespoons and stir through chopped fresh herbs of choice. Top with slices of prosciutto. goats cheese and rocket, or cream cheese, smoked salmon and capers.

Scrambled Eggs
Serves 2

• 4 large eggs
• ⅔ cup thickened cream
• Salt and freshly ground black pepper
• 20g butter
  Toast, to serve

1. in a medium bowl, whisk the eggs, cream, salt and pepper until well combined. Heat butter in skillet over a medium heat until it bubbles.
2. Pour in the egg mixture and cook, stirring with a wooden’, until the eggs are just starting to firm but are still quite moist.
3. Serve immediately with hot, buttered toast.

Sweet Crepes
Makes approx. 16 crepes

• 3 eggs 60g butter, melted
• 1¾ cups milk
• 250g plain flour
• 2 tablespoons caster sugar

1. Place crepe ingredients into a blender jug and blend on low for about 20 seconds or until combined. Strain into a jug and stand for 30 minutes.
2. Heat skillet on MED/MAX setting. Pour about ¼ cup of batter into the greased pan. Tilt the pan to spread the mixture evenly. Cook over a low heat on both sides until golden. Repeat with remaining mixture.
3. Serve crepes with lemon juice and sugar or hazelnut spread.

Omelette with Porcini Mushrooms
Serves 2

• 40g dried porcini mushrooms
• 4 eggs
• Salt and freshly ground black pepper butter
• ¼ cup grated parmesan cheese

1. Soak mushrooms in hot water for 10 minutes; drain and roughly chop.
2. Whisk eggs, mushrooms, salt and pepper in a medium bowl until combined.
3. Melt butter in skillet on MED/MAX setting; once bubbles have subsided pour in egg mixture. Once the egg mixture has begun to cook underneath use a wooden spoon to bring in the edges of the egg mixture into the centre of the skillet (this creates height in your omelette). Do this 2-3 times then allow the omelette to brown slightly underneath and almost set on the top.
4. Sprinkle the cheese over half of the omelette, then using a spatula, carefully fold the omelette in half. Cook for a further 30 seconds.
5. Carefully tip omelette onto a serving plate.

Troubleshooting

to adjust the time and temperature to desired taste. Refer to “Temperature Setting Guide” section.
Burning Smell| The temperature on your control probe is too high. Adjust temperature accordingly.| Refer to “Temperature Setting Guide” section.
Heating elements do not stay ON| Heating elements will cycle ON and OFF to maintain proper heat| The thermostat light on the control probe indicates the temperature at which the dial is set. The light will remain on until the set temperature has been reached and then will cycle on and off throughout the cooking.

This will ensure that the skillet maintains the correct temperature. On the initial heating of the skillet, it is recommended that the temperature be allowed to cycle (the light cycling on and off) several times. This will help the cooking surface to adjust to a more accurate cooking temperature.

Staining and discoloration of ceramic coating| Use of high pigmented ingredients or high temperature on first use| Refer to “Care & Cleaning” section

This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).

Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.

Upon receipt of your claim, Sunbeam will seek to resolve your difficulties or, if the product is defective, advise you on how to obtain a replacement or refund. To assist us in managing warranty claims, we recommend you register your product as soon as practicable after purchase, on our Sunbeam website and uploading a copy of your original receipt. View the Support section of the Sunbeam website.

In order to make a claim under our warranty, you must have the original proof of purchase documentation for the product and present it when requested (if not already uploaded to our website). Should your product develop any defect within 12 months of purchase because of faulty materials or workmanship, we will replace or repair it, at our discretion, free of charge.

A product presented for repair may be replaced by a refurbished product of the same type rather than being repaired. Refurbished parts may be used to repair the product.

Our replacement or repair warranty only applies where a defect arises as a result of faulty material or workmanship during the warranty period. Your warranty does not cover misuse or negligent handling (including damage caused by failing to use the product in accordance with this instruction booklet), accidental damage, or normal wear and tear.

Your warranty does not:

• cover freight or any other costs incurred in making a claim, consumable items, accessories that by their nature and limited lifespan require periodic renewal (such as filters and seals) or any consequential loss or damage; or
• cover damage caused by:
  • power surges, power dips, voltage supply problems, or use of the product on incorrect voltage;
  • servicing or modification of the product other than by Sunbeam or an authorized Sunbeam service centre;
  • use of the product with other accessories, attachments, product supplies, parts or devices that do not conform to Sunbeam specifications; or
  • exposure of the product to abnormally corrosive conditions; or
• extend beyond 3 months if the product is used in commercial, industrial, educational or rental applications.

The benefits given to you by our warranty are in addition to other rights and remedies under law in relation to the product.

In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Our goods also come with guarantees that cannot be excluded under the New Zealand Consumer Guarantees Act. If your warranty claim is not accepted, we will inform you and if requested to do so by you, repair the product provided you pay the usual charges for such repair. You will also be responsible for all freight and other costs.

Should your product require repair or service after the warranty period, contact your nearest Sunbeam service centre. For a complete list of Sunbeam’s service centres, visit our website or call our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.

Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. Australia visit phone www.sunbeam.com.au
1300 881 861
New Zealand |
visit phone www.sunbeam.co.nz 0800 786 232

Newell Australia Pty Ltd. ABN 68 075 071 233 Sunbeam is a registered trade mark. Made in China to Sunbeam’s specification. Due to minor changes in design or otherwise, the product you buy may differ slightly from the one shown here. Approved by the appropriate electrical regulatory authorities.

©Copyright Sunbeam

2022. 02/22 SKM6100DC_22EM1 (ANZ)_GCDS-LD P.N. NWL0001396223

References

• Sunbeam

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>