EMEET S600 Smart Cam Instruction Manual
- August 16, 2024
- eMeet
Table of Contents
EMEET SmartCam S600 Instruction Manual
How to Install the Webcam
-
Install it on a monitor/laptop
Install the webcam on a monitor or laptop at the desired position or angle, and ensure they fit snugly and firmly. -
Install it on a tripod
Install the webcam on a tripod using the 1/4″ tripod thread at its base.
*Tripods are sold separately.
How to Use the Privacy Protection Cover
To close the cover: Press the bulge above the lens, and rotate the switch to close the cover.
How to Connect the Webcam to Computer
Connect one end of the USB port to the webcam and the other end to the computer.
EMEETLINK
To use EMEETLINK, please download it from www.emeet.com/EMEETLINK first.
Adjust Resolution
Open the software (such as OBS or Windows Camera), select EMEET, click
[Settings] – [Resolution], select the required resolution (such as 1080P or
720P), and then record a video or start a live streaming.
*For more information, please visit https://emeet.com/pages/webcam-downloads
Copyright © Shenzhen EMEET Technology Co.,Ltd. Please visit
www.emeet.com to check the latest version of the
information contained in this manual.
EMEET Two(2) Year Limited Warranty
Limited Two(2) Year Warranty with EMEET proof of purchase. The warranty does
not cover normal wear and tear or damage caused by accidents or misuse. To
protect your rights, please keep the proof of pur- chase. For service, please
contact us:
www.emeet.com
Safety Guide
Caution: To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’ s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.
- Please read this guide carefully.
- Please keep this guide.
- Please observe all warnings.
- Please follow all instructions.
- When cleaning this product, use a dry cloth only.
- Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
- Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat.
- Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
- Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such asswimming or surfing.
- Please protect the USB cable. Do not step on or apply pressure on them. Do not pull on the product’ s plug, socket, or cable outlet.
- It is recommended that users use the accessories that have been specified by the vendor.
- When not using the webcam, please unplug the device from the USB port and turned off the power.
- To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if thepower cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product; the product has come into contact with rain or moisture,the product cannot operate properly, or if the product has fallen.
EU/UKCA Compliance:
Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. Corporation declares that the
equipment is in compliance with <Directive 2014/30/EU /EMCR 2016 (S.I.
2016/1091)>.
The suitable temperature for the product and accessories is 0~40°C.
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received,including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’ s authority to
operate the equipment.
ISED Canada compliance:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
UK REP:
Obelis UK Ltd, Sanford Gate, Oxford, OX4 6LB, UK
EC-REP:
Obelis S.A.
Boulevard Général Wahis 53, B-1030 Brussels, Belgium
Manufacturer EAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>