EKO KPS1080WP Self-Inflatable Screen User Manual
- June 3, 2024
- EKO
Table of Contents
KPS1080WP Self-Inflatable Screen
User Manual
KPS1080WP Self-Inflatable Screen
Product Care
- Before using and reusing. inspect the product carefully.
- Do not mount or place near gas or electric heaters. freplaces, candles, or other similar sources of heat.
- Unplug the product when not in use. Store neatly in a cool. dry location protected from sunlight.
- Do not place it where small children con reach it.
- Do not hang ornaments or other objects from cord. wire.
- Protect the electric fon and power cord from direct exposure to water. This precaution will reduce the risk of electrical shock.
- When the temperature is below 10°F (-14°C), the motor may temporarily stop running. The motor will begin functioning again in higher temperatures.
- Do not attempt to inflate the item during unusualy strong winds. If it becomes too windy for safe operation. simply allow the item to deflate and wait for better conditions before re-inflating.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged. it must be replaced by the manufacturer. its service agent or similarly qualified persons in order to avoid a hazard.
Package Contents
- 1 × Detachable Movie Screen
- 1× Inflatable Frome
- 6 × Stakes
- 6 × Ropes
- 1 × Carry Bag
- 1 × User Manual
Speciffication
| Screen Size: | 117^ (inches) |
|---|---|
| Aspect Ratio | 16:09 |
| Viewing Angle | 160 Degree |
| Frame Material | Oxford Cloth |
| Screen Material | Silk Cloth |
| Movie Screen | Detachable (with Velcro) |
How to inflation?
Stepl: Remove contents from packaging and lay out this product in a
clear, flat area. Ensure that the inflatable frame is lying so that the white
movie screen is facing up.
Step 2: Find the a1 mover and place it away from anything that may
obstruct its fan. Step 3: Plug cord into outlet device to inflate the
item. This process may take a few minutes. Make sure the air intake is clear
of fabric or other obstruction and zipper is fully closed.
Step 4: Stand the item upright. ensuing that fans are away from
obstructions.
Step 5: For outdoor use, Tie the ropes through each anchor point (6
points) and lock with stokes. How to Deflate and Store?
-
Remove the plug and open zipper to release at
-
Flatten the screen with white movie screen cloth up to avoid &tying the screen.
-
Fold in hall 3 times vertically.
-
Place in carry bog.
SUPPORT
[email protected]