MEAN WELL RT-65 Series 65W Triple Output Switching Power Supply Owner’s Manual

: August 14, 2024
: MEAN WELL

Table of Contents

MEAN WELL RT-65 Series 65W Triple Output Switching Power Supply
Product Usage Instructions
FAQ
Features
SPECIFICATION
Mechanical Specification
Block Diagram
Documents / Resources

MEAN WELL RT-65 Series 65W Triple Output Switching Power Supply

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
PRODUCT

Product Usage Instructions

Installation:

Ensure the power supply is compatible with your device’s requirements.
Connect the input terminals to a suitable power source.
Connect the output terminals to your device following the provided specifications.

Operation:

Turn on the power supply using the power switch or by connecting it to the power source.
Monitor the LED indicator to ensure power is on.

Safety Precautions:

Do not operate the power supply in wet conditions to avoid electric shock.
Avoid overloading the power supply beyond its rated capacity.
If any abnormalities occur during operation, disconnect the power supply immediately.

FAQ

Frequently Asked Questions

Q: What should I do if the LED indicator does not light up?
- A: Check the power source and connections to ensure proper installation. If the issue persists, contact customer support for assistance.
Q: How can I determine the appropriate output voltage for my device?
- A: Refer to the specifications provided in the user manual and select the output voltage that matches your device’s requirements.
Q: Can I use this power supply for outdoor applications?
- A: It is recommended to use the power supply in indoor environments to prevent damage from external elements.

Features

Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°C long life electrolytic capacitors
Withstand 300 VAC surge input for 5 second
High operating temperature up to 70°C
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-2

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

SPECIFICATION

MODEL	RT-65A	RT-65B	RT-65C	RT-65D

OUTPUT

| OUTPUT NUMBER| CH1| CH2| CH3| CH1| CH2| CH3| CH1| CH2| CH3| CH1| CH2| CH3
DC VOLTAGE| 5V| 12V| -5V| 5V| 12V| -12V| 5V| 15V| -15V| 5V| 24V| 12V
RATED CURRENT| 6A| 2.8A| 0.5A| 5A| 2.8A| 0.5A| 5A| 2.2A| 0.5A| 4A| 1.5A| 1A
CURRENT RANGE Note.6| 0 ~ 8A| 0 ~ 3.5A| 0 ~ 1A| 0 ~ 8A| 0 ~ 3.5A| 0 ~ 1A| 0 ~ 8A| 0 ~ 3A| 0 ~ 1A| 0 ~ 8A| 0 ~ 2A| 0 ~ 1A
RATED POWER Note.6| 66.1W| 64.6W| 65.5W| 68W
RIPPLE & NOISE (max.) **Note.2| 80mVp-p| 120mVp-p| 80mVp-p| 80mVp-p| 120mVp-p| 80mVp-p| 80mVp-p| 120mVp-p| 80mVp-p| 80mVp-p| 150mVp-p| 120mVp-p
VOLTAGE ADJ. RANGE| CH1: 4.75 ~ 5.5V| CH1: 4.75 ~ 5.5V| CH1: 4.75 ~ 5.5V| CH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3| ±2.0%| ±6.0%| ±5.0%| ±2.0%| ±6.0%| ±5.0%| ±2.0%| +8,-4%| ±5.0%| ±2.0%| +4,-10%| ±6.0%
LINE REGULATION Note.4| ±0.5%| ±1.5%| ±0.5%| ±0.5%| ±1.5%| ±0.5%| ±0.5%| ±1.5%| ±0.5%| ±0.5%| ±1.5%| ±2.0%
LOAD REGULATION Note.5| ±1.0%| ±3.0%| ±1.0%| ±1.0%| ±3.0%| ±1.0%| ±1.0%| ±3.0%| ±1.0%| ±1.0%| ±3.0%| ±4.0%
SETUP, RISE TIME| 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)**| 60ms/230VAC 14ms/115VAC at full load

INPUT

PROTECTION

| ****

OVERLOAD

| 110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

| CH1: 5.75 ~ 6.75V
Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

| WORKING TEMP.| -25 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)on +5V output
VIBRATION| 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

(Note 7)

| SAFETY STANDARDS| UL62368-1, TUV BS EN/EN62368-1, BIS IS 13252(Part 1):2010/IEC 60950-1:2005, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035,BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, EAC TP TC 020

OTHERS

| MTBF| 2720.8K hrs min. Telcordia SR-332 (Bellcore) ;507.6K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 1299838mm (LWH)
PACKING| 0.44Kg; 30pcs/13.2Kg/0.72CUFT

NOTE

|

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation, when multi-channel output, it is recommended that CH1 load > 10%.
Line regulation is measured from low line to high line at rated load.
Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
Each output can work within current range. But total output power can’t exceed rated output power.
The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitudes higher than 2000m(6500ft).

※ Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Mechanical Specification

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-3

Case No. 903 Unit:mm

Terminal Pin No. Assignment

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-7

Block Diagram

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-4

Derating Curve

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-5

Output Derating VS Input Voltage

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-6

User’s Manual

MEAN-WELL-RT-65-Series-65W-Triple-Output-Switching-Power-Supply-
FIG-2

Documents / Resources

| MEAN WELL RT-65 Series 65W Triple Output Switching Power Supply [pdf] Owner's Manual
RT-65A, RT-65B, RT-65C, RT-65D, RT-65 Series 65W Triple Output Switching Power Supply, RT-65 Series, 65W Triple Output Switching Power Supply, Triple Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply, Supply
---|---