WOODBRIDGE BID03 Electronic Toilet Seat Installation Guide

: August 14, 2024
: WOODBRIDGE

Table of Contents

WOODBRIDGE BID03 Electronic Toilet Seat
Safety instructions
List of materials
Parts Identification
Product Dimension and Installation Tool
Preparation
Button User Guide
Maintenance
Technical Specification
Troubleshooting Guide
Product warranty card
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WOODBRIDGE BID03 Electronic Toilet Seat

Safety instructions

Safety Instructions

Please read the instructions carefully before installation and keep it available for future maintenance or reference. Failure to observe this instruction can cause body injury and property damage. Symbol illustration

Warning| Indicates that failure to follow the instructions may cause serious injury or a fatal.
---|---
Caution| Indicates that failure to follow the instructions may cause body injury or property damage.
Symbol| Indication
---|---
| Prohibited activities
| Mandatory activities
Warning

| Do not throw cigarettes and other burning stuff into the toilet, otherwise, it might cause a fire.

| Never disassemble, repair, or modify this product. Doing so may cause fire or electrical shock.

Do not wash the main unit or electrical plug with water or detergent. Doing so may cause fire or electrical shock.

Do not handle the electrical plug with wet hands. Doing so may cause electrical shock.

It is prohibited to use other electric appliances in the same socket.

It is forbidden to use the power extension or unstable loose outlet; otherwise, it may cause fire or electrical shock.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

This product is an electric appliance, so it must be placed far away from water. Please don’t drench urine and other liquid into it.

Do not put a hand or other staff over the outlet of the air dryer or block the outlet of the air dryer. Doing so may cause burns and electrical shock.

Do not lay the product on its side or upside during the electrical circuit, to avoid fire or burning.

Mandatory activities

| Do not install or use the product in wet places such as steam rooms etc. This product must be connected to a properly grounded power outlet socket.

Please make sure the power socket conforms to the national standard (the left is the null line, and the right is a live line).

Warning

Mandatory activities

| This product should be used with 110-120V, 50-60Hz electrical current

only, load current is at least 15A. The power plug must be equipped with a ground fault circuit interrupter or ground fault electrical leakage protector or similar high sensitive, rapid type leakage switch (Rated sensitive current under 6mA).

It is recommended to use a water-proof electrical outlet which should be installed in a place that is not easily wet.

An old aging water supply hose can not be used, otherwise, it might cause leakage, fire, or electrical shock. Installation of the bidet seat should include specified components and a new water supply hose.

When moving the product from a cold or wet environment to normal room temperature, wait for 2 hours until the condensation water is fully volatilized. Doing so can prevent the product from electrical short-circuit.

Caution

| When it is in thunder, it is strongly recommended to pull out the power plug. Do not use the product in places close to the bathtub or water tank.

Do not place the product in water or other liquids.

Do not touch the product that has fallen into liquids, immediately pull out the power plug.

Do not stand on a ceramic toilet. The ceramic toilet must have a fixing bolt.

Do not stand on the product unit, seat, and cover.

Do not use lacquer thinner, petrol, liquid medicine, detergent, insecticide, toilet cleanser, and scrubbing brush to clean the product.

Only use tap water or potable water; otherwise, it may cause chafing. Exposure to direct sunlight is prohibited.

This product is equipped with a soft-closing seal cover. Heavy pressing or pushing may damage the soft-closing damper.

Do not connect the water supply to the heater outlet. Make sure inlet water temperature at 3~35 °C.

Do not lean against the seat cover when using the product,to avoid damage.

Stop using the product and shut off the power when the product malfunctions, please contact service people for professional service.

Mandatory activities

| During installation, disassembly, repair, and maintenance of the product, the power plug must be switched off and the water supply be shut off.

When the room temperature is under zero degrees, please dry up the water tank, to avoid freezing.

When not using the product over three(3) days, drain the water out of the container and pull the electrical plug from the wall outlet.

The appliance is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.

Children are being supervised not to play with the appliance.

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the se of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be done by children without supervision.

Raise the restroom temperature to prevent the toilet from being damaged due to freezing.

List of materials

The pictures are for reference only, please refer to the product for details!

Parts Identification

Product Dimension and Installation Tool

Installation of Main Unit

This product has been tested for water flow before shipping. Please note that some residual water on the product is normal.
Do not install this product in a wet place such as a bathroom, and do not place it in a place easily exposed to water.

Installation of the base plate

Install the expansion nuts into the toilet mounting holes first, and then securely install the base plate, fixing brackets and screws in sequence as shown

Installation and disassembly of the main unit

Installation of Main Unit: Push the main unit into the base plate until it locks with a “click” sound. Disassembly of Main Unit: Press the “Release button”, and pull out the main unit when a “click” sound is heard.
Once the Release Button is pressed, you do not have to hold it during the disassembly process.

Installation of the water inlet pipe and Tvalve

Connect the T valve to the angle valve (Remove the existing T valve.);
Connect toilet water supply pipe to T valve as shown above;
Connect the bidet water supply pipe to the T valve as shown above.

Note:

Do not distort or damage the supply hose to avoid any leakage.
Do not use water supply hose and other accessories of other brands, which may cause danger.
Do not recommend to use our old water supply hose and accessories, which may cause danger

Preparation

Turn on the angle valve\ Check the threaded connection for leaks to ensure complete sealing. Turn the angle valve counterclockwise to the full open position.
(Note: The angle valve opens with a large torque for the first time.)
Power Connection
Insert the leakage protection plug into a power socket, press the reset switch, plug indicator lights up, indicating that the power is on.
Note:
Press the test button prior to usage, the reset switch pops up and the indicator light goes off, indicating that the leakage protection function is normal. Press the TEST button (then the RESET button) every month to ensure proper operation.
Only for models with leakage protection plugs.
Please refer to the actual product.
Self-inspection
Once power is connected, the buzzer beeps once. The white light on the knob (button) flashes, and the self-inspection starts.
The buzzer beeps again, then the self-inspection completes, and the knob (button) lights up in white.
The product is ready to use.

Auto lid open/close
If you purchase the intelligent toilet with auto lid open/close function, the product can achieve the function of auto lid open/close.

Approaching the toilet
When the user enters the sensing range, the seat lid opens automatically.
Leaving the toilet
The seat lid closes automatically 180 seconds after the user leaves.
Standing up to urinate
Open the seat with a remote control or hand.
The seat and lid close automatically 180 seconds after the user leaves.

Button User Guide

1. When not seated, short press the button, and the spray wand will automatically extend for cleaning.

2. When the human body is seated, short press the button to start the one- button rear

wash function: rear wash → drying → automatic stop drying.

3. When the human body is seated, press and hold the button to start the one- button

front wash function: front wash→ drying → automatic stop drying.

4. When the rear wash, front wash, and drying functions are turned on, short- press the button to immediately stop the current function.

5. When not seated, press and hold the button to enter standby mode. Short press the button in standby mode to enter function mode;

Function mode-When the product is working, the button indicator light is on; When no one is using it, the button indicator light will turn off after a period of time. If any function is used again, the button indicator light will return to display.

Standby mode-button indicator light will turn off

Maintenance

Maintenance of Main Unit

Shut off power supply before doing maintenance.
Use only a soft, damp cloth to clean. Avoid using harsh chemicals.
Once cleaning is completed and all surfaces are dry, re-connect the power plug.

Note: Do not rinse the surface of the product directly with water during maintenance.

Nozzle Maintenance

When there is dirt on the nozzle, maintain it according to the following methods:

When no one is seated, turn the knob clockwise (press Rear Washing Button). The nozzle will automatically stretch out to allow access for cleaning.
The nozzle can be removed and cleaned separately. (Hold the spray wand with one hand and pull the nozzle out with the other hand)
Put the nozzle back on and press the “Stop” button on the main unit or remote control to return the spray wand to its normal position

Note : Do not pull or push the wand, to avoid damage.

Deodorizing Device Maintenance

Remove the screws from the underside of the unit as shown below to access the deodorizing cartridge.

Replacement of the deodorizing cartridge is recommended every 3 years (the specific life span depends on the environment).
Please purchase deodorizing cartridge from the official online stores.

3-way filter maintenance

If poor spray performance occurs under normal conditions:

Turn off the angle valve.
Disconnect the water supply pipes from the angle valve.
Take out the filter and filter washer.
Clean out the filter under running water using a toothbrush.
Reinstall the filter and filter washer, then re-connect the water supply pipes.

Product filter maintenance

Product filter maintenance

Plug off the power cord, switch off the angle valve, remove the cover, and place the cover upside down.
Use a screwdriver (flat-headed) to insert the position of the plug hole shown in the figure, and then lift out the plug to remove it.
Remove the water inlet pipe from the product.
Use needle-nose pliers to remove the filter screen from the water inlet. Clean dirt with a toothbrush or small brush.
After cleaning, install the filter back into the water inlet, connect the water inlet pipe, and replace the plug.
Reinstall the cover to function properly

Reminder: During cleaning, do not lose or damage the filter components and the sealing ring on the filter screen connector, otherwise it may cause water leakage

Technical Specification

Main Unit	Rated voltage	110V-120V, 50-60Hz
Rated power	900W
Water pressure range	0.08MPa – 0.8MPa (Static pressure)
Power cord length	About 1.2m

Cleaning device

| Heating power| 1400W(120V)
Water temperature| 6-level adjustment
Water volume| 5-level adjustment
Cleaning mode| Rear wash/moving wash, front wash/moving wash, child wash/moving wash
Nozzle position| 5-level adjustment
Water pressure protector| Pressure maintaining device, Automatic pressure relief device
Anti-fouling device| Anti-syphon device, Anti-backflow device, Filter device

Safety device

| Water temperature sensor, Dry heating protection, Thermostat, Thermal fuse, Ground protection, Leakage protection,

Anti-freezing and anti-cracking device

Drying device

Heated seat

| Surface temperature| 6-level adjustment
Heating power| 50W
Burn protection| After 10 minutes of use, the seat temperature will automatically drop slowly to a low level
Safety device| Seat sensor, Temperature sensor, Bimetallic thermostat, Thermal fuse
Deodorization| Deodorization method| Photocatalyst-free

Caring device

| Night light assembly| Smart, Always on, Always off
Noise-free setting| The buzzer is off at night for a quiet environment.
User ID setting| To avoid interference when used by multiple users
Auto-open lid function| Auto-open lid function can be realized
Antibacterial site| Seat, Nozzle

Troubleshooting Guide

Problem	Cause	Solution

No water from the nozzle

| The water supply hose is kinked| Straighten the hose to remove the kink
The angle valve is off| Turn on the angle valve
A water failure occurred| Restore the water supply

Restore the water supply

| The water supply hose is kinked| Straighten the hose to remove the kink
The angle valve is not fully turned on| Turn on the angle valve fully
Filter is clogged| Clean the filter
Low water

temperature

| The water temperature is not

set properly

| Adjust the water temperature

Low seat temperature

| The seat temperature is not

set properly

| Adjust the seat temperature
In standby mode| Switch to functional mode and wait for 3+ minutes
Low dryer

temperature

| The dryer temperature is not

set properly

| Adjust the dryer temperature
Dryer not blowing| In standby mode| Switch to functional mode to use

dry function.

The spray wand cannot retract

| Power off| Push back the spray wand gently

and put power on

Get stuck by impurities| Remove the impurities

The spray wand cannot stretch out

| Power off| Turn on the power
The user is not within the sensing area of the seat| Adjust the position of the seat to activate the sensor

Malfunction of deodorization

| The user is not within the sensing area of the seat| Adjust the position of the seat to activate the sensor

The deodorization function continues after a user leaves

| It is normal for the deodorizing function to continue operating after the user leaves, for complete odor removal.

Caution

| If the problem cannot be resolved as per above solutions, please disconnect the power and contact service providers.
If the power leakage protection switch always trips, it means that the product is leaking. Please disconnect the power and contact service providers.

Product warranty card

Model No.| | Customer Name|
---|---|---|---
Seller| | Purchasing Date|
Invoice No.| | Customer Contact|
Distributer Stamp| | Distributor Phone|

Thank you for choosing our product. This product is warranted for a 1-year limited warranty since the purchasing date for free repair of problems arising out of defects in workmanship while used in accordance with the installation manual and usage cautions for intended purposes. If the product does not work properly within the warranty period, please contact Woodbridge via email. Our company reserves the right to replace the product with other similar models. Product Warranty will be voided by any of the following events (including but without limitation).

The user’s negligence or mistake in operation, unreasonable repair, or alteration.
Products are damaged by negligence or mistake during installation.
The movement of the installation location of the product.
Using the product outside of intended use in residential housing or commercial hotels.
The use of non specified power supply (voltage, rating pressure)
The dirt, sand, and impurities that causing invalid operation.
Damages due to force majeure (including but not limited to natural disasters) or other incidents.
The user fails to use it in compliance with the warning or caution described in the installation manual.

Remark:
Please fill in the date, and seller correctly. If there are some mistakes, the warranty will be invalid. This three-year warranty for free-of-charge repair service is only for the items listed in the warranty. The purchasing date is subject to the purchasing invoice or receipt. Please keep this warranty and invoice/receipt available for repair or maintenance.