BORMANN PRO BPW4300 Electric Pressure Washer User Guide

BORMANN PRO BPW4300 Electric Pressure Washer

Specifications

• Model: BPW4300 037408
• Version: v2.2
• Languages: EN, IT, EL, BG, RO
• Website: www.nikolaoutools.com

Product Usage Instructions

Safety Instructions

• Before using the machine, please read and understand the instruction sheet provided with the product.
• Ensure that the machine is used at a temperature above 0 degrees, especially for machines with a power cord of H05VV-F.
• Follow the recommended operating methods in case of accidents or breakdowns to prevent unsafe situations.
• Only use the cleaning agent supplied or recommended by the manufacturer to maintain machine safety.
• Wear ear protectors while operating the machine.
• Avoid using the machine near individuals without protective clothing and never direct the jet toward people or yourself.
• Avoid spraying flammable liquids as they pose a risk of explosion.
• Use only high-pressure hoses, fittings, and couplings recommended by the manufacturer for machine safety.
• Ensure the use of original spare parts approved by the manufacturer to maintain machine safety.
• Do not connect the machine to potable water mains.
• Always use original spare parts, including nozzles, and replace damaged parts before using the machine.
• Be cautious of kickback force on the spray assembly and firmly grasp the trigger gun when operating.
• Do not allow children or untrained individuals to operate the high-pressure cleaner.
• Stay alert, avoid operating the machine under the influence of alcohol or drugs, and keep the operating area clear of persons.
• Follow maintenance instructions specified in the manual for proper upkeep of the machine.

Electrical Safety

• Ensure the machine is properly grounded to reduce the risk of electric shock in case of malfunction or breakdown.
• The plug must be connected to a properly installed and grounded outlet in compliance with local codes and ordinances.
• Verify that the rating voltage (V/Hz) of the machine matches the local power supply voltage.

Safety instructions

WARNING : Do not use the machine without reading the instruction sheet.

• Read all the instructions before using the machine.
• Machines shall not be used by children. Children should be supervised to ensure that they do not play with the machine. This machine is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge
• The electrical supply connection shall be made by a qualified person and comply with IEC 60364-1. The electric supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit.
• The machine is intended to be used at a temperature above o degree. (Only for machines with the power cord of H05VV-F).
• The operating method to be followed in the event of an accident (e.g. contact with detergents: rinse with an abundance of clean water) or breakdown to prevent unsafe situations.
• This machine has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the machine.
• Recommend the operator to wear ear protectors.
• Do not use the machine within range of persons unless they wear protective clothing.
• Do not direct the jet against yourself or others to clean clothes or footwear.
• Risk of explosion does not spray flammable liquids.
• High-pressure hoses, fittings, and couplings are important for the safety of the machine. Use only hosed, fittings and couplings recommended by the manufacturer.
• To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
• Water that has flown through backflow preventers is considered to the non-potable.
• The machine shall be disconnected from its power source by removing the plug from the socket-outlet during cleaning or maintenance and when replacing the machine to another function.
• Observe a distance of at least 30cm when using the jet to clean painted surfaces to avoid damaging paintwork.
• Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high-pressure hoses, and trigger guns. WARNING: If an extension cord is used, the plug and socket must be of watertight construction.
• Inadequate extension cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground. It is recommended that this is accomplished using a cord reel which keeps the socket at least 60mm above the ground.
• To avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

WARNING: The machine is not intended to be connected to the potable water mains.

Warning:

• To ensure the machine’s safety, please only use original spare parts (including the nozzle) from the manufacturer or approved by the manufacturer. Do not use the machine before you change them if they are damaged.

• Be aware of the danger of the kickback force on the spray assembly when opening the trigger gun and grasp the gun with your hands firmly.

• To reduce the risk of injury, close supervision is necessary when a machine is used near children. High-pressure cleaners shall not be used by children or untrained persons.

• Know how to stop the machine and bleed pressures quickly. Be thoroughly familiar with the controls.

• Stay alert and watch what you are doing.

• Do not operate the machine when fatigued or under the influence of alcohol or drugs.

• Keep the operating area clear of all persons.

• Do not overreach or stand on unstable support. Keep good footing and balance at all times.

• Follow the maintenance instructions specified in the manual.

• This machine must be grounded. If it has malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly installed and grounded by all local codes and ordinances. The rating voltage (V/Hz) of the machine has to comply with the local power supply voltage.

• Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided by the machine. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this machine.

• Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole cord connectors that accept the plug from the machine. Use only extension cords that are intended for outdoor use and the socket must be of watertight construction. These extension cords are identified  by a marking “Acceptable for use with outdoor machines; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the machine. Do not use damaged extension cords. Examine the extension cord before using it and replace it if damaged.

• Inadequate extension cords can be dangerous. Do not abuse the extension cord and do not yank on any cord to disconnect. Keep the cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the machine from the extension cord.
  To reduce the risk of electrocution, don’t start and run the machine in the rain or storm. Keep all connections dry and off the ground. Do not touch the plug with wet hands. It is strictly prohibited to let water leak into the machine.

• WARNING: When the machine is turned on, the interior pumps start and continue to run even if the pressure wand trigger has not been depressed. Running the machine for more than 3 minutes without depressing the pressure wand trigger could cause heat damage to the motor and umps, Please do not leave the machine running unattended or unused for more than 3 minutes.

• When the machine is running, please maintain a constant water supply. Without water circulation, the sealing rings of the machine.

• It is necessary to turn on the spray lance within one or two minutes after the machine has been started. Otherwise, the temperature of the circulating water within the machine will soon rise to a critical point, which will cause damage to the sealing rings inside the machine.

• Don’t start and run the machine in a place excessively cold to prevent the machine from freezing current.

• This machine has been designed for only using cleaning water, do not use corrosive chemicals.

• Use a cleaning agent recommended by the manufacturer.

WARNIN G: High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, live electrical equipment, or the machine itself. Pressure washers should not be pointed at tire walls, as it may be possible to damage them.

WARNING: Do not direct the jet against yourself or others to clean clothes or footwear.

• Disconnect from the electrical power supply before carrying out user maintenance.
• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• Do not use the machine if a supply cord or important parts are damaged, e.g. safety devices, high-pressure hoses, or trigger guns.
• Be aware of the recoil caused by the water jet when the machine is switched on.
• When the machine is moving and installing, the machine must be flat. When moving the machine, pull the handle to move it.
• Connect to the water supply. The machines are not suitable for connection to portable water mains. Connect the machine to the water supply. (It can be a water container).
• Make sure the inlet water pressure keeps between 0.01MPa and 0.4MPa.The inlet pipe should be at least 5 M long. Do not use the pipe if the pipe is damaged. If you want to connect this machine to portable water mains, you must install a backflow preventer in the water pipe to prevent dirty water flow back to the drinking water system. The backflow preventer shall comply with EN 60335-2-79 ANNEX AA.

Intended use

• The portable pressure washing machine is a highly specialized multifunctional machine with exceptionally reliable safety assurance, which may be used to wash and clean cars, bikes, and other outdoor equipment or garden patios, greenhouses, etc.

Technical Data

• Voltage/Frequency: 230 V / 50 HZ
• Type of motor : Induction motor
• Power: 1800 W
• Working pressure: 90 bar
• Max pressure: 135 bar
• Flow: 360 L/Hour
• Max flow : 432 L/Hour
• Other features : Autostop & self-priming function, 5m hose reel, 5m cable with VDE plug, built-in detergent tank
• Includes: 1x quick connect spray gun with adjustable spray nozzle, 1x quick turbo nozzle, 1x transparent water inlet filter

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.

• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
• Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment

Description of main parts (Picture A)

1. High-pressure washer 5. Water inlet
2. On/off switch 6. Gun
3. Wheel 7. Hose Reel with Trigger Gun Hose
4. Water outlet 8. Hose Reel Handle

Operating instructions

Helpful Hints for Getting Started

Automatic ON/OFF:
The motor on this pressure washer does not run continuously. It only runs when the trigger of the spray gun is squeezed. After following the start-up procedures in this manual, turn the pressure washer ON and squeeze the trigger for activation. See the “Operating Instruction” section in this manual for further details.

Bleeding the Gun:
It is very important to bleed the gun before using the pressure washer. Squeeze the trigger to allow any air that is trapped inside of the unit and hose to escape. Continue to squeeze the trigger until a steady stream of water comes from the nozzle. (This process may take up to 2 minutes). See the “Operating Instructions” section for this process.

WARNING! This unit is to be connected to a cold water source ONLY.
The motor of this pressure washer will NOT run. It will only operate when the trigger is squeezed.

• Connect the outlet hose to the washer and connect the spray gun to the outlet hose.
• Connect nozzle and nozzle extension.
• Check gauze filter is clear of any blockage.
• Connect the water supply hose.
• Check that the hose has no kinks in it.
• Turn on the water and check for leaks.
• Depress trigger to allow air to be expelled through the pump and hoses, lock trigger.
• Plug in the machine and turn on the switch.
• Unlock the rigger and use the pressure washer.

Shut down

1. Turn off the motor (push the switch to the off position).
2. Unplug the unit from the power source.
3. Turn off the water supply. Press the trigger of the gun to depressurize the system.
4. Disconnect the garden hose from the pressure washer.
5. Wipe all surfaces of the unit with a damp clean cloth.
6. Engage the gun safety lock.

CAUTION: ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply. Serious damage could occur to the motor if the unit is run without water.
CAUTION: NEVER disconnect the high-pressure discharge hose from the machine while the system is still pressurized. To depressurize the unit, turn off the motor, turn off the water supply, and squeeze the trigger 2-3 times.

Adjustable spray nozzle
Turn off the spray lance first, hold the rear part of the spray nozzle, then turn the front part of the spray nozzle clockwise, Water may be sprayed out from the spray nozzle in fan shapes (fig 2); Turn the front part of the spray nozzle anti-clockwise, Water may be sprayed out from the spray nozzle linearly (fig 1).
CAUTION: Water should be sprayed out from the spray nozzle in fan shapes (fig 2), when cleaning the car or other vehicle.

Water inlet screen
The water inlet filter must be inspected regularly, to avoid blockage and restriction in the water supply to the pump (fig 3).

Using detergent
Add detergent to the container. Set the Adjustable Spray Wand at a low- pressure position. Trigger gun to spray detergent.

Foam cleaning method
Be sure to insert the cleaning solution in the built-in suction pot and remove the tip as shown in the figure.

Bottom stand installation Install the bottom stand as shown.

Gun safety device
Whenever you use the high-pressure washer, we suggest you grip the in the right position, with one hand on the handle and the other on the lance, When you stop the machine it is necessary to use the safety lock placed on the gun to avoid accidents.

Cleaning pin instruction

• Using the included tip cleaner, or an unfolded paper clip, insert wire into the nozzle hole and move back and forth until debris is dislodged.
• Remove additional debris by back-flushing water through the nozzle. To do this, place the end of a garden hose ( with water running ) to the end of the nozzle for 30-60 seconds.

Installation, electrical, and water connections

1. Pressure cleaner
2. Water supply hose (not included)
3. Water connection 7. Spray gun
4. Water inlet 8. Power supply
5. High-pressure tube
6. High-pressure, water outlet

Note: Given continuous machine development the company reserves the right to amend machine specifications without notice.

Troubleshooting

Inspection & maintenance

• For safety use, make sure a three-month clean the machine. Before working, make sure to inspect the filter and the nozzle, to make sure there are no impurities. After working, make sure there is no water in the pump and the hose.
• If the machine needs to be repaired in the guarantee period, please return the machine to the shop. You need to provide the certificate of purchase to repair.
• Before Packaging, The machine should be cleaned, then use closed packaging, packaging should be firm. Storage the machine in a dry place.
• For transportation safety. The machine should comply with ISTA.

Disposal and recycling instructions

Meaning of crossed-out wheeled dustbin:

• Do not dispose of electrical machines as unsorted municipal waste, use separate collection facilities.
• Contact your local government for information regarding the collection systems available.
• If electrical machines are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
• When replacing old machines with new ones, the retailer is legally obligated to take back your old machine for disposal at least free of charge.

WARRANTY **

**

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use, and 12 months for chargers and batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS

1. Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chucks, etc.).
2. Tools damaged as a result of non-compliance with the instructions of the manufacturer.
3. Tools poorly maintained.
4. Use of improper lubricants or accessories.
5. Toolsare given to third entities free of charge.
6. Damage due to an electrical connection at a voltage other than that indicated on the appliance plate.
7. Connection to a non-earthed power supply.
8. Change in current voltage.
9. Damage resulting from the use of salty water (e.g., washing machines, pumps).
10. Damage or malfunction resulting from improper cleaning procedure of the tool.
11. Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
12. Tools that have been modified or opened by unauthorized personnel.
13. Broken parts/components as a result of inappropriate use.
14. Tools used for rent.

The warranty covers only the free-of-charge replacement of the component that presents a manufacturing defect or material failure. In case ofa  lack of a specific spare part, the company reserves the right to replace the tool with another corresponding model. After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. Replacement of a spare part with a repair charge is covered b1-yearyear warranty of good operation, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.

WWW.NIKOLAOUTOOLS.COM

FAQ

• Q: Can I use other cleaning agents instead of the one recommended by the manufacturer?
  • A: It is not recommended to use other cleaning agents as they may affect the safety and performance of the machine. Stick to the recommended cleaning agent for optimal results.
• Q: What should I do if a part of the machine is damaged?
  • A: Do not operate the machine with damaged parts. Replace damaged components with original spare parts approved by the manufacturer before further use to ensure safety and proper functionality.
• Q: How should I store the machine when not in use?
  • A: Store the machine in a clean, dry place away from direct sunlight and moisture. Ensure all parts are properly secured to prevent damage during storage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>