D-Link M60 WiFi 6 Smart Mesh Router User Guide
- August 12, 2024
- D-Link
Table of Contents
D-Link M60 WiFi 6 Smart Mesh Router
Product Information
Specifications
- Product Name: M60 Wi-Fi 6 Smart Mesh Router
- Wi-Fi Standard: Wi-Fi 6
- LAN Ports: Multiple
- Admin Interface: Web-based
- Default Admin Password: Printed on the label sticker at the back of the router
Product Usage Instructions
Login to Admin Page
- Connect your computer or device to one of the router’s LAN ports using an Ethernet cable or via Wi-Fi.
- Open your web browser and enter
http://xxxx.devicesetup.net/(replace xxxx with the last 4 digits of the MAC address). - Enter the Admin Password (default password is on the device label) and click login to start the configuration process.
- If you have changed the password and cannot remember it, resetthe router to factory defaults.
- Go to System Admin under Management, then click System. If the domain address does not work, try accessing the admin page via the IP address (default is 192.168.0.1).
Finding IP Address of D-Link Router
To find the IP address of your D-Link router in Windows OS, follow these
steps:
- Open Command Prompt.
- Type
ipconfig /alland press Enter. - Look for the Default Gateway under the network adapter connected to your router; this is your router’s IP address.
How do I log in to the admin page of my M60 Wi-Fi 6 Smart Mesh Router?
-
1 Connect your computer or device to one of the router’s LAN ports using another ethernet cable or via Wi-Fi (By default, Password located on the label sticker at the back of the router)
-
2 If this is your first time installing the router, open your web browser and enter http://xxxx.devicesetup.net/ into the browser (xxxx represents the last 4 digits of the MAC address). Enter the Admin Password and click login to start the configuration process. The web address and default admin password are printed on the device label at the bottom of the device.
NOTE: If you have changed the password and cannot remember it, you will need to reset the router to factory defaults. -
Go to System Admin under Management, then Click System
-
If the domain address does not work, try accessing the router’s admin page via the IP address. Typically, the default is 192.168.0.1, but this can change depending on your network configuration
How to find the IP address of your D-Link router using Command Prompt in Windows OS:
- Press Win + R on your keyboard to open the Run dialog.
- Type CMD and press enter to open the command prompt.
- Run the command window, type ipconfig and press enter.
- Find the Default Gateway entry in the command output. This is the IP address ofyour Router.
You can also find the IP address in the app (AQUILA PRO AI app)
- Open the AQUILA PRO AI app.
- Tap your device (M60)
- Look for IP address
FAQ
How do I reset my M60 Wi-Fi 6 Smart Mesh Router to factory defaults?
To reset the router to factory defaults, locate the reset button (usually at
the back) and press it for about 10 seconds until the router restarts.
What should I do if I forget my custom admin password?
If you forget your custom admin password, you will need to reset the router to
factory defaults as described above.