DGL DG-EBTTW-ASST True Wireless Earbuds User Guide
- August 11, 2024
- DGL
Table of Contents
DGL DG-EBTTW-ASST True Wireless Earbuds
Bluetooth Pairing
For the first time, take out the earphone from the charging case or press and hold the touch function key for 3 seconds to turn on the Bluetooth initial pairing mode (LED status indicators will flash blue and red)a. Turn on the phone Bluetooth pairing and search for DG-EBlW to select and complete the initial pairing. After initial pairing, this connection is saved to automatically pair in the future (when phone Bluetooth is turned on)
Touch Button Quick Guide
| BUTTON INPUT | FUNCTION |
|---|---|
| Touch LEFT or RIGHT button: | ANSWER/HANG UP |
| Touch LEFT or RIGHT button: | PAUSE/PLAY |
| Touch LEFT button 2 times: | SKIP BACKWARD |
| Touch RIGHT button 2 times: | SKIP BACKWARD |
| Touch LEFT button 3 times: | VOLUME – |
| Touch LEFT button 3 times: | VOLUME + |
| Touch LEFT button 3 times: | SIRI VOICE ASSISTANT |
| Touch LEFT button 3 times: | TURN ON/TURN OFF |
Specification
| Model: | DG-EBlW-ASST |
|---|---|
| Bluetooth Version: | 5.0 |
| Bluetooth Range: | 10m |
| Microphone sensitivity: | -42Db |
| Battery type: | Rechargeable lithium-ion battery |
| Battery capacity: | 30mAh (each earbud) t (case) |
| Playback time: | 4 hours (@ 50% volume), 8 hours (case holds 2 charges) |
The battery capacity, music playback time, and charging times are measured by
a standard charger at laboratory room temperature (25°C). The actual result
may vary depending on the environment, charger type, and other factors. The
specifications and parameters are laboratory test data.
This manual is for reference only. The specific functions and product pictures
may differ slightly from the actual product.
Fcc Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Please note that
changes or modifications not expressly I approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates; uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>