EUROPOWER PMP2000D 2000 Watt 14 Channel Powered Mixer User Guide

Quick Start Guide EUROPOWER PMP2000D
2000-Watt 14-Channel Powered Mixer with
Klark Teknik Multi-FX Processor and Wireless Option

Important Safety Instructions

**Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock.
Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do notremove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to qualified personnel.
Caution
To reduce the risk of fire or electric shock,do not expose this appliance to rain and moisture. The apparatus shall not be exposed to drippingor splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution**
These service instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two bladeswith one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2023 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

EUROPOWER PMP2000D Controls Controls

1. The FX control determines the signal level thatis routed from the respective channel to the built-in effects processor.
2. The HIGH control in the EQ section governs the high frequencies of the respective channel.
3. Use the MID control to boost/cut the mid range.
4. The LOW control allows you to raise or lower the bass frequencies.
5. The MON control determines the channel’s volume assigned to the monitor mix.
6. Use the LEVEL control to set the volume level of the respective channel.
7. Use the CLIP LED to ensure that the input gain is set properly. The CLIP LED should light up only with peak signals, but never all the time.
8. The PAD button reduces the channel input sensitivity by 25 dB. Thus, you can also connect high-level line signals to the respective channel input.
9. This HI-Z/LINE input can be used to connect line level signal sources, such as keyboards, electric and bass guitars.
10. This is the channel’s balanced XLR microphone input.
11. The stereo line input of channels 7 – 12 can be used to connect, for example, keyboards with stereo outputs or a stereo drum computer.
12. The 2-TRACK/LINE IN RCA input of channel 13/14 allows you to feed in external stereo signals from your CD player or tape deck, for example.
13. The 2-TRACK/LINE OUT RCA output provides the stereo main mix signal of your PMP2000D and can be routed to, say, a recording machine.
14. The phantom power supply provides the voltage necessary for the operation of condenser microphones. Use the PHANTOM POWER switch to activate the supply together for channels 1 – 12 (XLR connector). The LED above the switch is lit when phantom power is on.
15. This is the PMP2000D’s graphic stereo equalizer, which comprises two units and can be used to adapt the sound to the room acoustics.
16. Use the EQ IN buttons to switch the two equalizer units on or off.
17. Press the LOW CUT button to activate the low-cut filter of channels 1 – 6. This filter eliminates unpleasant bass frequencies (e.g. microphone pop noise).
18. The FX TO MON control determines the effects intensity of the multi-effects processor as part of the monitor mix. Turn the control fully counter-clockwise to add no effect to the monitor mix.
19. The MONITOR LEVEL control adjusts the volume of the monitor mix.
20. Use the MONITOR LEVEL display to control the monitor signal level. The upper LED (LIM) lights up when the built-in limiter is activated, thus protecting against overload.
21. POWER AMP switch determines whether the PMP2000D works as a stereo amplifier (MAIN L/MAIN R), a dual amplifier with the left channel dedicated to monitoring (MONITOR/ MONO) or a single mono amplifier with both channels dedicated solely to front-of-house sound reinforcement (BRIDGE/BRIDGE). In BRIDGE/BRIDGE mode, please use a single 2-pole speaker cable with pins 1+ and 2+ of OUTPUT B only.
22. The MAIN LEVEL control governs the overall volume of the PMP2000D.
23. The MAIN LEVEL display reads the output level of the PMP2000D. The upper LED (LIM) lights up when the built-in limiter is activated, thus protecting against signal peaks.
24. The FX TO MAIN control functions as FX return for the built-in effects processor. Use this control to add the desired effect signal to the main mix. No effect signal is added when the FX TO MAIN is set fully counter-clockwise.
25. DIGITAL WIRELESS USB input accepts the optional BEHRINGER wireless microphone receiver. The LEDs indicate wireless microphone signal input. WIRELESS MIC 1/MIC 2 input signals are routed to channel 1 and channel 2.
26. AUX IN section accepts audio signals from external devices using 1/8″ TRS stereo connectors. The AUX IN knob controls the input level.
27. Use the FX FOOTSW(itch) jack to connect any commercially available foot controller. It allows you to bypass the effects unit.
28. Here, you will find a list of all multi-effect presets available.
29. This is the LED level meter of the effects processor. Please make sure that the clip LED lights up with signal peaks only. If it is lit constantly, this indicates that the effects processor is overdriven, which can lead to unpleasant distortion.
30. The Effect display reads the currently selected preset.
31. Turn the PROGRAM/PARAMETER [PUSH] control to select the effect presets. Press the control briefly to confirm your selection. PUSH and TURN the button to adjust one parameter of the currently chosen effect.
32. FX button activates the effects processor when pressed.
33. TAP button allows you to program time-based effects (such as delay) by pressing the button repeatedly in time with the desired tempo. The TAP LED flashes rhythmically to show the current tempo.
34. The mains connection is on a standard IEC receptacle. An appropriate power cord is supplied with the unit.
35. Use the POWER switch to put your PMP2000D into operation. The POWER switch should always be in the “Off” position when you are about to connect your unit to the mains.
36. SERIAL NUMBER.
37. OUTPUT A uses pins 1+ and 1- to send out the left (LEFT) speaker channel over a single 2-pole speaker cable. As an option, you may also connect a single 4-pole speaker to OUTPUT A to carry both the left and rightspeaker outputs, in which case the left channel output will use OUTPUT A pins 1+ and 1-, while the right channel uses OUTPUT A pins 2+ and 2-. When the POWER OUTPUT switch is set to BRIDGE/BRIDGE mode, the bridged mono output uses pins 1+ and 2+ of OUTPUT B only (using a single 2-pole speaker cable), and you should therefore NOT connect any speaker cable to OUTPUT A.
38. OUTPUT B uses pins 1+ and 1- to send out the right (RIGHT) speaker channel over a single 2-pole speaker cable. When the POWER OUTPUT switch is set to BRIDGE/BRIDGE mode, the bridged mono output uses pins 1+ and 2+ of OUTPUT B only (using a single 2-pole speaker cable), and you should therefore NOT connect any speaker cable to OUTPUT A.

Specifications

Mic Inputs

Type| 9 x XLR, electronically balanced discrete input circuit, channels 1 – 12
Mic E.I.N. (20 Hz to 20 kHz)
@ 0 Ω source resistance| -108 dB / -110 dB A-weighted
@ 50 Ω source resistance| -108 dB / -110 dB A-weighted
@ 150 Ω source resistance| -106 dB / -107 dB A-weighted
Frequency response (-1 dB)| <20 Hz to 22 kHz (-1 dB)
Frequency response (-3 dB)| <20 Hz to 35 kHz (-3 dB)
Max. input level| +13 dBu with PAD
Impedance| 1.5 kΩ, balanced
Signal-to-noise ratio| 98 dB / 100 dB A-weighted (-15 dBu In @ +35 dB gain)
Distortion (THD+N)| 0.002%, A-weighted
Pad| -25 dB, channels 1 – 6
Phantom power| +48 V, switchable
Hi-Z / Line Inputs
Type| 4 x 1/4″ TRS, balanced, channels 1 – 4
Impedance| 1.8 MΩ balanced, 1 MΩ unbalanced
Max. input level| +22 d Bu
Wireless Input
USB dongle (not included)| USB socket accepts signals from max. 2 BEHRINGER ULM microphones
Signal indicator LED| 2 (green)
Mono Line Inputs
Type| 2 x 1/4″ TRS, balanced, channels 5 and 6
Impedance| 20 kΩ balanced, 10 kΩ unbalanced
Max. input level| +22 d Bu
Stereo Line Inputs
Type| 6 x 1/4″ TRS connector, balanced channels 7 – 12
Impedance| 20 kΩ balanced, 10 kΩ unbalanced
Max. input level| +22 d Bu
2-Track / Line In
Type| 2 x RCA, unbalanced, channels 13 and 14
Impedance| 20 kΩ unbalanced
Gain range| -∞ dB to +20 dB
Max. input level| +22 d Bu
Channel EQ
Low| ±15 dB @ 60 Hz
Mid| ±15 dB @ 700 Hz
High| ±15 dB @ 6 kHz
Aux In
Type| 1/8″ TRS connector, unbalanced
Impedance| 10 kΩ
Gain range| -∞ dB to +20 dB
2-Track / Line Out
Type| 2 x RCA, unbalanced
Impedance| 2.4 kΩ
Max. output level| +9 dBu
Graphic Equalizers
Type| analog 9-band equalizer
Frequency rang| 20 Hz to 20 kHz in 9 1-octave bands (ISO frequencies)
Bandwidth| 1 octave
 Control range| ±12  d B
Low Cut
Type| 18 dB/oct., Butterworth, channels 1 – 6
 Frequency| 100 Hz
Main Mix System Data (Noise)
Main mix @ -∞, channel fader @ -∞| -59 dBu / -59 dBu A-weighted
Main mix @ 0 dB, channel fader @ -∞| -56 dBu / -56 dBu A-weighted
Main mix @ 0 dB, channel fader @ 0 dB| -56 dBu / -56 dBu A-weighted
Power Amp Specifications
Maximum output power|
Both channels driven|
8 Ω per channel| 500 W
4 Ω per channel| 1000 W
Bridged mode|
8 Ω| 2000 W*
Loudspeaker Connections
Connectors| 2 x professional twist-locking speaker connectors
Load Impedance
Left / monitor| Min. 4 Ω
 Right / mono| Min. 4 Ω
Bridge| Min. 8 Ω
Power Supply / Voltage (Fuses)
USA / Canada| 120 V~, 50/60 Hz (T 8 A H 250 V)
 Japan| 100 V~, 50/60 Hz, 8 A (T 8 A H 250 V)
UK / Australia / Europe/Korea / China| 220-240 V~, 50/60 Hz (T 5 A H 250 V)
Power consumption @ 4 Ω, 1/8 rated power| 180 W
Mains connection| Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D)| 276 x 455 x 250 mm (10.9 x 17.9 x 9.8″)
Weight| 9.0 kg (19.8 lbs)

*Independent of limiters and driver protection circuits

Other important information

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer
EUROPOWER PMP2000D
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address:legal@musictribe.com

EUROPOWER PMP2000D
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

We Hear You

Documents / Resources

| EUROPOWER PMP2000D 2000 Watt 14 Channel Powered Mixer [pdf] User Guide
PMP2000D 2000 Watt 14 Channel Powered Mixer, PMP2000D, 2000 Watt 14 Channel Powered Mixer, 14 Channel Powered Mixer, Powered Mixer
---|---

References

• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>