Dgl Group VE-WDBL Wireless Doorbell Installation Guide
- June 6, 2024
- DGL GROUP
Table of Contents
Dgl Group VE-WDBL Wireless Doorbell
OVERVIEW
installation Notes
Screw mounting method
Double-sided tape installation method
Installation methods and precautions
A series wireless doorbell is A smart doorbell different from the traditional wireless doorbel 1, the transmitter and receiver can be freely paired. simple operation and nasy to use. no electromagnetic ic interference,
Product features
Fashionable design Easy install lationEnviroment friendly60 Chord tones 5 levels of volume (including mute)The receiving distance is long to 300 meters in a straight 1ine (laboratory test data) and the transmitter and receiver can be freely matched
Music Settings
After selecting music along-press the volume button for 4 seconds, and the receiver lights up and enters the learning state: When the transmitter is pressed, the receiver flashes light and it’s a ring tone to lock the ring tone successfully. Free match i ng mode of transmitter and receiver: Loe press the volume button of the receiver for 4 seconds, the receiver 1ights up and enters the learning state: When the transmitter is pressed. the receiver flashes light and rings to indicate that a match has been made.
NOTE
- Non-professionals are forbidden to open the device which may result in destroying precision electronic components.
- Highvol stage circuit in the device. don” t open it when it’s working Or it may result in electrical shock
- Use the doorbell in the right may make it long life
- Functional range may be adversely affected by one or more of the fol lowing factors: weather. radio frequency interference, transmitter battery and abstractions between the transmitter and receiver
- Old batteries can also corrode the connections and damage the button or doorbell. If you found out the funet ion range decrease shorter. please change the fresh battery in time
- Do not install on metal objects (such as iron doors, stainless steel doors, etc)
WARRANTY
- 1-year worry-free after-sales guarantee service.
- The guarantee except for incorrect using way. aocidantal danage or non-profess ional personnel open the device
- The accessories of the product are not covered by the warranty
Product
- Push-button: 23A1zV alkaline battery
- Ring Bel 1: 110/220 v Please refer to the relevant laws and regulations if there are any outstanding issues or disputes. The company reserves the right to amend and ultimately inter pret this statement
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>