Dgl Group Live Love Music LED Wireless Speaker User Guide
- June 6, 2024
- DGL GROUP
Table of Contents
Live Love Music LED Wireless Speaker
User Guide
CHARGING THE SPEAKER
Charge the speaker before using it for the first time.
Plugin the cable to the micro USB port and charge for at least 2 hours.
Connect the charging cable to the charging port.
PAIRING YOUR SPEAKER
Your speaker will work best if it is within 30 ft. of your smart device. You may experience sound briefly cutting off if you are out of range or if your wireless connection is weak. Make sure Bluetooth is enabled on your smartphone or tablet before starting the pairing process.
Make sure the speaker is turned off before attempting to pair it with a smartphone or tablet.
Press and hold the power button until the indicator light flashes. The speaker will automatically enter pairing mode.- From your smartphone or tablet, find a list of nearby devices and choose “FB-FLED”. Enter “0000” if asked. The speaker will “beep” when the pairing is complete!
MEDIA KEY FUNCTIONS
Press & Hold-Turn Speaker ON/OFF
Press Once -Switch LED light mode
Press & Hold -Turn LED light ON/OFF
Press Once -Play/ Pause music/ Answer Call/End Call
SPECIFICATIONS
Operation Range: Up to 33ft (10m)
Play Time: Up to 4 hours
Battery Capacity: 1200mAh
Charging Time: Up to 3 Hours
FCC ID: 2AANZFLED
BT ID: D051448
WARRANTY
This product is covered by a 3-month limited manufacturer’s warranty. Contact
us if you have any problems at
[email protected].
WARNING
Keep away from heat sources.
Do not disassemble.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Use only the battery provided. There may be a risk of explosion
if the wrong type of battery is used for the parent unit. The battery cannot
be subjected to high or low extreme temperature and low air pressure at high
altitudes during use, storage or transportation. Disposal of the battery into
fire or a hot oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high temperature
surrounding environment can result in an explosion or the leakage of flammable
liquid of gas. Battery subjected to extremely low air pressure may result in
an explosion or the leakage of flammable liquid or gas. Dispose of used
battery according to the instructions.
Rechargeable battery information: ShenZhen JuSheng New Energy CO., LTD. 18650.
1200mAh
Use and store the product at a temperature between -10 °C and 45°C.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirements.