DGL VE-WDBL Wireless Doorbell Installation Guide
- June 6, 2024
- DGL
Table of Contents
DGL VE-WDBL Wireless Doorbell
Recevier and transmitter key schematic diagram
Screw mounting method
Double side tape installation method
Installation method and precautions
A series of wireless doorbells
A series wireless doorbell is A smart doorbell different from the traditional wireless doorbel, the transmitter and receiver can be freely paired. sirple aperation and easy to use. no electromagnetic interference.
Product features
Fashionable design easy installation Enviroreent friendly60 Chord tones
5 levels of volume (including mute)The receiving distance is long
Up to 300 meters in a straight line (laboratory test data)
And the transmitter ad receiver can be freely matched.
Music Settings
After selecting music. long-press the volume button for 4 seconds. and the receiver 1ights p and enters the learning state: When the transmitter is pressed. the receiver flashes light and it’s a ring tone to lock the ring tone successfully. Free matching mode of transmitter and receiver: Long press the volume button of the receiver for 4 seconds, and the receiver lights up and enters the learning state; when the transmitter is pressed. the receiver flashes light and rings to indicate that a match has been muce
NOTE
- Non-professional personnel is forbidden to open the device which may result in destroying precision electronic components.
- The high-voltage circuit in the device doesn’t open when it’s working. Or it may result in electrical shock.
- Using the doorbell in the right way can make it long 1ife.
- Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low transmitter battery, and obstructions between the transmitter and receiver.
- Old batteries can also corrode the connections and damage the button or doorbel1, If you found out the function range decreased shorter. please change the fresh battery in time.
- Do not install metal objects (such as iron doors, stainless steel doors, etc.
WARRANTY
- 1-year worry-free after-sales guarantee service.
- The guarantee except for the Incorrect using way. accidental damage or non-professional personnel open the device.
- The accessories of the product are not covered by the warranty.
Product
1. Push button: 23A1ZV alkaline battery
2. Ring Bell: 110/220 V
Please refer to the relevant laws and regulations if there are any outstanding issues ar disputes. The company reserves the right to amend and ultimately interpret this statement
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.