MODify 12908 Single Sided Kit 01 Display Pros Instruction Manual

MODify 12908 Single Sided Kit 01 Display Pros

Introduction

MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.

MODify Single Sided Kit 01 retail merchandising display features a printed fabric graphic on the front and back sides, four steel shelves for merchandise and a drop in base deck with leveling feet. Easily configure with casters, towel bars, faceout bars and more.

MODify Single Sided Kits should be mounted to a wall or structure for safety and stability.

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.

Features and benefits

Base Kit includes:

• Frame, shelf, and platform colors in kit are all the same – white, black, or silver
• Heavy-duty aluminum frame
• Steel, slatted uprights
• Four, 36”W x 12”D powder-coated steel shelves
• Two 35”W x 69”H Single-sided SEG push-fit fabric graphics, one front/one back
• Drop-in base with leveling feet (casters are optional)
• Display is easy to assemble and install Lifetime hardware warranty against manufacturer defects.

Optional Accessories:

• Casters
• Towel Bars
• Faceout Bars

Dimensions

Hardware

Assembled unit: 37.5”W x 72”H x 20.5”D | 952.5mm(w) x 1828.8mm(h) x 520.7mm(d)

Approximate Weight: 93 lbs / 42.1841 kg

Shipping

Packing case(s): 1 Box
Shipping dimensions: (72″L x 14″H x 24″D) 1828.8mm(l) x 355.6mm(h) x 609.6mm(d)
Approximate shipping weight: 142 lbs / 64.4101 kg

Graphics

Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes.

Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here.

Additional information:

Powder coat color options:

• White

• Black

• Silver

Wood laminate color options:

• White
  

• Black

• Natural

• Gray

MODify Accessories

All Accessories available in white, black, or silver

Slotwall Accessories

• MFY-SLT-HK 4″, 6″, 8″, 10″ & 12″
  

• MFY-SLT-FC 6″, 8″, 10″ & 12″
  

• MFY-SLT-WTR-16-7
  

U-Bar Accessories

• MFY-TWL-FC 6″, 8″ & 10″
  

• MFY-UBR-FC 6″, 8″ & 10″
  

Shelf and Hanger Bars

• MFY-36-12-SHELF
  

• MFY-SLF-36-12-HB
  

• MFY-SLT-TWL-36-3
  

• MFY-UBR-36-12
  

• MFY-DB-36-17
  

Tools Required

• MULTI HEX KEY
  (INCLUDED)

• PHILLIPS SCREWDRIVER
  (NOT INCLUDED)
  

• 9/16″ SOCKET WRENCH
  (NOT INCLUDED)
  

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.

Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

Graphics Storage & Care

Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

SETUP INSTRUCTIONS

• MFY-BOLT-375-16-2.5
  
  

• IMPORTANT! MAKE A HALF TURN TO LOCK EXTRUSIONS
  

• LOOSEN END CAP TO ATTACH TOP CROSS BRACE
  

• WALL MOUNT CLIPS
  

• CROSS BRACE SITS ON SUPPORT LEGS
  

NOTE: BOTTOM CROSS BRACE SITS ON TOP INSIDE EDGE OF LEFT AND RIGHT SUPPORT LEG

Disclaimer: Unit must be permanently secured and fastened to wall or other structure for stability.

finish size, Dye-sub print on Eclipse Blockout  Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE)

• PRESS GRAPHIC INTO CORNERS
  

• THEN PRESS ALONG THE PERIMETER EDGE
  

STEP 7

ATTACH SHELVES AND ADD BASE PAN.

• HOOK SHELVES TABS INTO STANDARD
  

• MFY-36-17-BASE-PAN
  

Kit Hardware BOM

LOCKS BOTH ENDS
| MFY-BOLT-375-16-2.5| 2| 3/8-16 x 2.5″L b
| MFY-BRKT3| 2| WALL BRACKET
| MFY-DB-36-17| 1| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
| MFY-SLF-36| 4| MODIFY 36IN WIDE X 12IN DEEP SHELF

Kit Graphics BOM

size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE)

References

• The Exhibitors' Handbook

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>