AEG0002-UK AENOTM Electric Double Sided Grill User Guide
- August 10, 2024
- AENO
Table of Contents
AEG0002-UK AENOTM Electric Double Sided Grill
Specifications
- Model: AEG0002 (type E/F plug), AEG0002-UK (type G plug)
- Designed for cooking various meat, fish, and vegetable dishes
FAQ
Q: What should I do if there is smoke or odor during the test run?
A: Smoke and odor during the test run are normal and not a defect of the device. Ensure proper ventilation and allow the grill to cool completely before use.
Q: How should I clean the cooking plates?
A: Clean the plates with a soft cloth dampened with clean water, then wipe them dry before and after each use to maintain cleanliness.
AENOTM Electric Double-sided Grill is designed for cooking various meat, fish
and vegetable dishes.
Model: AEG0002 (type E/F plug), AEG0002-UK (type G plug).
Technical Specifications
Input parameters: 220–240 V (AC), 10.0 A, 50/60 Hz, 2,000.0 W (max.).
Temperature control: 0 °C (“0”), 170 °C (“MIN”) – 230 °C (“MAX”). Opening
angle: 105°/180°. Cooking plates: non-removable, 290×234 mm (×2). Grooved
surface and non-stick coating. Heating time: up to 3 min. Control: mechanical.
Overheat protection and temperature maintenance. Non-slip feet. Device
dimensions (L×W×H): 345×327×115 mm. Colour: black. Case material: stainless
steel, plastic. Power cord length: 0.8 m. Operating conditions: temperature
0…+40 °C, relative humidity < 95 % (without condensation). Storage conditions:
temperature 0…+60 °C, relative humidity < 60 % (without condensation). Scope
of Delivery (fig. A)
AENOTM Electric Double-sided Grill, grease drip tray (7), Quick Start Guide.
Device Elements (fig. A)
- temperature control knob,
- heating indicator,
- power indicator,
- lid handle,
- lid lock,
- hinge release button,
- grease drip tray,
- power cord.
Safety Operation Rules
Please read this document carefully before using the device. The device is not intended to be used by children under the age of 14 or by persons with reduced physical, mental or intellectual abilities if they do not have sufficient experience or knowledge of its operation, and if they are not under the supervision of a person responsible for their safety. The device is intended for domestic use only. Do not use the device outdoors. Before use, make sure that the rated voltage and frequency indicated in the technical specifications correspond to the parameters of the electricity supply. Use the device with dry hands only. Make sure that the power cord does not get twisted, bent or pressed by anything, and does not come into contact with hot objects or heat sources. Do not use a device that is damaged or has previously fallen into water. Do not disassemble or repair the device yourself. Repairs must be performed by a qualified service technician of a service centre. Use the device in a well-ventilated area away from flammable objects. Do not place the grill under wall cabinets and/or shelves or near indoor plants. Use caution when handling a hot device. Open and close the grill only by using the lid handle. Turn and remove food only with non-sharp, heat-resistant kitchen tools (spatula, tongs). Do not leave the device that has been turned on unattended. Small characteristic crackles and clicks during heating are not a defect of the device. Do not wash the grill in the dishwasher or under running water. Do not use chemical or aggressive detergents, abrasive pastes, acids, solvents, or metal sponges for cleaning. Do not allow children to use and/or play with the device. For detailed information, see full user manual available for download at aeno.com/documents.
LED Indicators Statuses
| Name | Status | Description |
|---|---|---|
| Power indicator | White indicator is on | Device is connected to the electricity |
supply
Indicator is off| Device is not connected to the electricity supply
Heating indicator| Blue indicator is on| Device is connected to the
electricity supply, heating is in progress *
Indicator is off| Device is connected to the electricity supply, the set
temperature of the cooking plate has been
reached, heating is paused
Device is not connected to the electricity supply
- Turning the heating on and off is accompanied by a characteristic click.
Before First Use
-
Open the packaging and remove the device. Remove all packaging aeno.com/document materials.
-
Slide the lid lock (fig. B) and open the grill.
Note. By default, the grill opens to 105°. To open the grill to 180°, gently lower the lid (fig. C) by first pressing and holding the hinge release button. -
Wipe the cooking plates with a soft cloth dampened with a warm detergent solution, then with a cloth dampened with clean water. Wipe the cooking plates dry.
-
Perform a test run (see below).
Test Run
Note. A test run of the device is performed without using any food.
-
Place the grill on a stable horizontal surface.
-
Close the lid of the device and plug the power cord into an outlet.
-
Set the temperature control knob to the “MAX” position. The heating indicator will light up.
WARNING! A small amount of smoke and a characteristic odour during the test run are not a defect of the device. -
Wait until the heating indicator turns off.
-
Set the temperature control knob to the “0” position, unplug the device.
-
Open the grill and wait for it to cool completely.
-
Wipe the cooking plates with a soft cloth dampened with clean water, then wipe them dry. The grill is ready for use.
Operation
-
Prepare the products: wash and/or peel them if necessary, chop large products, thaw frozen foods.
Note. Cooking time will depend on the type of product, the thickness of the cut and the desired degree of doneness. -
Make sure that the grease drip tray is inserted into the grill (fig. D).
-
If necessary, put a small amount of oil/butter on the cooking plates.
-
Close the grill and plug it in.
-
Set the desired temperature using the control knob. The heating indicator will light up.
-
Wait until the heating indicator turns off.
-
Choose one of the cooking methods:
On a closed grill (fig. E): lift the lid and place the food on the lower plate. Gently lower the lid. Leave the food to cook until the desired doneness.
Note. If you need to check if the food is ready while cooking is in progress, gently lift the lid by its handle.
On an open grill (fig. F): open the grill to 180° by pressing and holding the hinge release button, and place the food on the cooking plates. Leave the food to cook until desired doneness, turning it occasionally with a special spatula or tongs (not included). -
Once the desired degree of doneness has been reached, turn the temperature knob to the “0” position and unplug the device.
-
Remove cooked products from the plates.
-
Wait for the device to cool down completely and clean it (see below).
Cleaning and Maintenance
- Carefully remove the grease drip tray from the device.
- Use paper towels to remove food residue and grease from the cooking plates and the drip tray.
- Clean the cooking plates and the drip tray with a soft cloth dampened with a warm detergent solution. Then wipe with a cloth dampened with clean water.
- Wipe the cooking plates and the drip tray dry.
- Install the drip tray in the device.
Troubleshooting
- The device does not turn on. Possible cause: a defective outlet. Solution: check if the outlet is working properly by plugging in another device, if necessary, plug the grill into a working outlet.
- The device turns on but does not heat up. Possible cause: the temperature is not set correctly. Solution: set the temperature in the range between “MIN” and “MAX” using the temperature control knob.
- The heating indicator turned off while the device was in operation. Possible cause: overheating protection was activated. Solution: set the temperature control knob to the “0” position, unplug the device and let it cool down. To continue cooking, turn the device on again.
ATTENTION! If none of the suggested methods fixes the problem, contact the supplier or a service centre. Do not disassemble or attempt to repair the device yourself.
ASBISC reserves the right to modify the device and to make changes and additions to this document without prior notice to users. The date of manufacture is indicated on the package. The warranty period and service life is 2 years from the date of retail sale of the product. Manufacturer’s information: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made in China. All trademarks and names herein are the property of their respective owners. Up-to-date information and a detailed description of the device, as well as connection instructions, certificates, information about companies that accept quality claims and warranties, are available for download at aeno.com/documents.
If you have any questions or difficulties with using your AENO device, please contact support by e-mail at support@aeno.com or online chat at aeno.com/service-and-warranty. The specialists will help you solve the problem, and you will not have to waste time and effort visiting the store.
Recycling information
This symbol indicates that you must follow the Waste Electrical and Electronic Equipment (WEEE) and Waste Battery and Battery Regulations when disposing of the device, its batteries and accumulators, and its electrical and electronic accessories. According to the rules, this equipment must be disposed of separately at the end of its service life. Do not dispose of the device, its batteries and accumulators, or its electrical and electronic accessories together with unsorted municipal waste, as this will harm the environment. To dispose of this equipment, it must be returned to the point of sale or turned in to a local recycling facility. You should contact your local household waste disposal service for details.
Device name:
Serial number:
Purchase date:
Seller stamp: ____
Download the full warranty card on aeno.com ARA aeno.com
Please contact our online support team if you have any questions or issues with your AENO device.
This is a better option than visiting the store and will save you time and effort
References
- Home appliances AENO - Smart home appliances on the official website of the manufacturer AENO in Europe
- Service and Warranty | AENO in Europe