SYLVI Analog Elegadoom Grey Watch Instruction Manual

: August 10, 2024
: SYLVI

Table of Contents

SYLVI Analog Elegadoom Grey Watch
Brief Introduction
Operation Instructions
How to Adjust Silicone Band
Battery Instructions
Warranty Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SYLVI Analog Elegadoom Grey Watch

SYLVI-Analog-Elegadoom-Grey-Watch-product

Brief Introduction

Function Instruction

Water Resistant

3 ATM

Watch Dial

Diameter: 38mm

Watch Case

Hight : 46mm
Diameter : 41mm
Thickness : 12mm

Leather Strap

Width : 20mm
Thickness: 3mm

Silicone Strap

Width : 20mm
Thickness: 3mm

Mesh Strap

Width : 20mm
Thickness: 3mm

Operation Instructions

How to Set Time

Gently pull the crown out to position C.
Turn it in either direction until you reach the correct time.
After setting the correct time, push the crown back to position A (Normal)

How to Set Date & Day

Gently pull the crown out to position B. You’ll feel a click.
Turn the crown anti-clockwise until you reach your desired date.
For the day, turn the crown clockwise until you reach your desired day.
Push the crown back into position A (Normal).

How to Adjust Silicone Band

Step 1 : Open the magnetic buckle
Step 2 : Open the clasp and slide the end of the band
Step 3 : Close the buckle

Battery Instructions

Strap Instructions

Leather Strap

SYLVI-Analog-Elegadoom-Grey-Watch-fig-7

The strap with 20mm width, 3mm thickness & 18cm Length.

Silicone Strap

SYLVI-Analog-Elegadoom-Grey-Watch-fig-8

The strap with 20mm width, 3mm thickness & 18cm Length.

Mesh Strap

SYLVI-Analog-Elegadoom-Grey-Watch-fig-9

The strap with 20mm width, 3mm thickness & 18cm Length.

Water Resistant
For information about the water-resistant rating of Sports, Casual, Chronograph, and Slim watches please refer to page 3. The water-resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see the chart for recommended usage guidelines. To ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:

Do not adjust the crown while the timepiece is in contact with water.
Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
For timepieces with pusher-enabled functionality, do not engage the function underwater.
Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
If rated 5ATM or higher wipe dry with a soft cloth.

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.

In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is not available, a watch of equal value and similar style will be provided.

This warranty does not cover

Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
Products that are not purchased from an authorized retailer.
This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.

Get Additional Warranty

How to Claim Warranty?

Step 1: Contact customer care and report your problem. An RMA ID will be generated (Without an RMA ID, the warranty cannot be claimed)

Step 2:
The product will have to be sent to the service center including the following information.

RMA ID – Given by customer care executive
Name
Full address
Daytime contact mobile number
Email address
Where your item was purchased from
Model reference of the item (Found on the back of your watch)
Full description of the work required
A copy of your proof of purchase

How to Reach Us?

For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 6.00 pm. (closed on National and Festival holidays). If you are unhappy for any reason, please mail us at customercare@sylvi.in. We promise to reply by the next working day.