SYLVI Urbanic Silicone Strap Analog Watches Instruction Manual
- September 25, 2024
- SYLVI
Table of Contents
SYLVI Urbanic Silicone Strap Analog Watches
Specifications
- Watch Dial Diameter: 30mm
- Watch Case Height: 48mm
- Watch Case Diameter: 40mm
- Watch Case Thickness: 10mm
- Silicone Strap Width: 21mm
- Silicone Strap Thickness: 5mm
Product Usage Instructions
- Pull out the crown to position C.
- Turn the crown in either direction to set the correct time.
- Adjust the correct time.
- Push the crown back to position A (Normal).
- Pull out the crown to position B.
- Turn the crown in either direction to set the correct date.
- Set the correct date.
- Push the crown back to position A (Normal).
FAQ
- Q: How long is the warranty period for the watch?
- A: The watch is warranted for six (6) months from the original date of purchase under specific terms and conditions. Please refer to the Warranty Instructions section for more details.
- Q: What is the water resistance rating of the watch?
- A: The watch has a water resistance rating of 3 ATM. Please refer to the Water Resistant section for more information on water-related exposure guidelines.
- Q: How can I claim a warranty for my watch?
- A: To claim a warranty, you need to contact customer care to report your problem. An RMA ID will be generated, and warranty claims can only be processed with this ID. Please refer to the How to Claim Warranty section for detailed steps.
Brief Introduction
Function Instruction
Watch Dial
- Diameter: 30mm
Watch Case
- Height: 48mm
- Diameter: 40mm
- Thickness: 10mm
Silicone Strap
- Width : 21mm
- Thickness: 5mm
Operation Instructions
How to Set Time:-
- Pull out the crown to position C.
- Turn crown either way to correct time.
- Adjust your correct time.
- Push the crown to the position A (Normal).
How to Set Date:-
- Pull out the crown to position B.
- Turn crown either way to correct date.
- Set your correct date.
- Push the crown to the position A (Normal).
Battery Instructions
- A LR626 battery cell for the Urbanic watch
Strap Instructions
Silicone Strap
- The strap with 21mm width 5mm thickness & 20cm Length.
Water Resistant
For information about the water-resistant rating of Sports, Casual,
Chronograph, and Slim watches please refer to.
The water-resistant rating provides guidelines for appropriate water-related
exposure to avoid damage to internal watch components. Please see the chart
for recommended us- age guidelines.
To ensure water does not enter the watch and cause damage to it, please follow
the instructions listed below:
- Do not adjust the crown while the timepiece is in contact with water.
- Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
- For timepieces with pusher-enabled functionality, do not engage the function underwater.
- Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
- Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
- Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
- If rated 5ATM or higher wipe dry with a soft cloth.
Recommendations For Water-Related Use
Warranty Instructions
Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.
- In case of replacement, we cannot guarantee that you will receive the same model watch.
- If your model is not available, a watch of equal value and similar style will be provided.
This warranty does not cover
- Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
- Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
- Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
- Products that are not purchased from an authorized retailer.
- This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.
Get Additional Warranty
- https://support.sylvi.in/warranty-registration Click Here to Open
How to Claim Warranty?
Step 1
- Contact customer care and report your problem. An RMA ID will be generated (Without an RMA ID, the warranty cannot be claimed)
Step 2
The product will have to be sent to the service center including the following information.
- RMA ID – Given by customer care executive
- Name
- Full address
- Daytime contact mobile number
- Email address
- Where your item was purchased from
- Model reference of the item (Found on the back of your watch)
- Full description of the work required
- A copy of your proof of purchase
How to Reach Us?
- For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 6.00 pm.
- (closed on National and Festival holidays).
- If you are unhappy for any reason, please mail us at customercare@sylvi.in.
- We promise to reply by the next working day.