Sylvi YD-1DG Digital Belt Black Big Dial Watch Instruction Manual

: June 14, 2024
: SYLVI

Table of Contents

Brief Introduction
Operation Instructions
Warranty Instructions
Get Additional Warranty
How to Claim Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**Sylvi YD-1DG Digital Belt Black Big Dial Watch Instruction Manual

**

Brief Introduction

Watch Dial
- Diameter:34mm
Watch Case
- Height:60mm
- Diameter:52mm
- Thickness:18.56mm
Strap
- Width:22mm
- Thickness:2.97mm

A Light Button
B Mode Change
C Reset Button
D Start/Stop Button

Operation Instructions

How to Set Time
- Analog Watch
- Digital Watch

**Analog Watch

**

Pull out the crown to position B.
Turn crown either way to correct time.
Fix your correct time.
Push in the crown to the position A (Normal)

Digital Watch

In normal mode, press B three times. You will enter into a setting mode where seconds will be flashing. Press D to zero.

Press C , the “Hours” will flash. Press D for adjusting “Hours”
Press C , the “Minutes” will flash. Press D to adjust “Minutes”
Press C, the “Month” will flash. Press D to adjust “Month”
Press C , the “Date” will flash. Press D to adjust “Date”
Press C , the “week” will flash. Press D to adjust “Day”
Press the B key to exit.

How to Set Alarm:-
In normal mode, Press B to enter Alarm mode and press C, “hours” will flash Press D to adjust the hour for your alarm. Pay attention to am/pm, 12H display A/P means AM/PM, 24H display “H” means HOUR Press C, minutes will flash. Press D to adjust minutes for your alarm Press the B key to exit.
How to turn On/Off Alarm:-
In normal mode press B to enter Alarm mode Press D once, If the Bell sign ( ) on the display is visible, Alarm is ON else OFF.
How to turn On/Off Chime mode In normal mode press B to enter Alarm mode and D twice time If the sign( ) on the display is visible, Chime is ON else OFF.
How to Set Stopbwatch:
In normal mode, Press B twice to enter Stopwatch mode Press D to “Start/Stop”}
How to use Lap Timing:-
When stopwatch is set zero 100.00
Press D to start stopwatch
Press C to pause stopwatch
Press C to resume stopwatch, (Stopwatch will resume from Elapsed time
Battery Instructions
A CR2025 battery cell for Digital and LR626 for Analog display.
**Strap Instructions

**

  * The strap with 13.5cm at tail side and 8cm at buckle side.
  * The strap with 28mm width.
  * A replacement belt of lug size 28mm is suggested for this watch

Water Resistant
For information about the water-resistant rating of Sports, Casual, Chronograph, and Slim watches please refer to page 3.
The water resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see the chart for recommended usage guidelines.
To ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:
Do not adjust the crown while the timepiece is in contact with water.
Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
For timepieces with pusher-enabled functionality, do not engage the function underwater.
Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water if rated 5ATM or higher and wipe dry with a soft cloth.

Recommendations For Water-Related Use

Indication|

SPLASH RESISTANT(Hand Washing)

|

SUBMERSIBLE(Swimming)

|

SHALLOW DIVING(Snorkeling)

|

SCUBA DIVING(Not Deep Sea)

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions. of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use. In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is not available, a watch of equal value and similar style will be provided.

This warranty does not cover:

Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
Products that are not purchased from an authorized retailer.
This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.

Get Additional Warranty

How to Claim Warranty

Step 1:
Contact customer care and report your problem. An RMA ID will be generated (Without RMA ID, warranty cannot be claimed)

Step 2:
The product will have to be sent to service center including the following information.

RMA ID Given by customer care executive Name Full address Daytime contact telephone number Email address Where your item was purchased from Model reference of the item (Found on the back of your watch) Full description of the work required A copy of your proof of purchase

How to reach us

For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 7.00 pm. (closed on National and Festival holidays).

If you are unhappy for any reason, please mail us at customercare@sylvi.in. We promise to reply by the next working day.