Sylvi 3022BRW Analog Digital Instruction Manual

June 14, 2024
SYLVI

sylvi-logo

Sylvi 3022BRW Analog Digital

Product Information

Specifications

  • Analog+ Digital Watch

  • Strap Colors: Coffee, Black, Brown

  • Watch Dial Diameter: 36mm

  • Watch Case Height: 56mm, Diameter: 46mm, Thickness: 17mm

  • Strap Width: 23mm, Thickness: 4.44mm

  • Crown: A Light Button, B Mode Change, C Reset Button, D
    Start/Stop Button

  • Water Resistant: 3 ATM

Operation Guide

How to Set Time

Analog Watch:

  1. Pull out the crown to position B.
  2. Turn the crown either way to correct the time.
  3. Fix your correct time.
  4. Push in the crown to the position A (Normal).

Digital Watch:

  1. In normal mode, press B three times. You will enter into a setting mode where seconds will be flashing. Press D to zero.
  2. Press C, the hours will flash. Press D to adjust hours.
  3. Press C, the minutes will flash. Press D to adjust minutes.
  4. Press C, the month will flash. Press D to adjust month.
  5. Press C, the date will flash. Press D to adjust date.
  6. Press C, the week will flash. Press D to adjust day.
  7. Press the B key to exit.

How to View Date
In normal mode, press and hold D.

How to Set Alarm

  1. In normal mode, press B twice to enter Alarm mode and press C.The hours will flash. Press D to adjust the hour for your alarm.Pay attention to am/pm, 12H display A/P means AM/PM, 24H display Hmeans HOUR.
  2. Press C, minutes will flash. Press D to adjust minutes for youralarm.
  3. Press the B key to exit.

How to Turn On/Off Alarm
In normal mode, press C & D simultaneously. If the Alarm on the display is highlighted, Alarm is ON else OFF.

How to Set Stopwatch
In normal mode, press B to enter Stopwatch mode. Press D to Start/Stop.

How to Use Lap Timing

  • Press D to start stopwatch.
  • Press C to pause stopwatch.

Battery Instructions

  • Battery for Digital: CR2025
  • Battery for Analog: LR626

Strap Instructions

  • The strap with 13.5cm at tail side and 8cm at buckle side.
  • The strap with 23mm width.
  • A replacement belt of lug size 24mm is suggested for this watch.

Water Resistant
Please refer to page 3 for information about the water-resistant rating of Sports, Casual, Chronograph, and Slim watches. The water-resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see the chart for recommended usage guidelines.

To ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:

  • If rated 5 ATM or higher, it is recommended to wipe dry with a soft cloth.

Recommendations for Water-Related Use

Indication| SPLASH RESISTANT (Hand Washing)| SUBMERSIBLE (Swimming)| SHALLOW DIVING (Snorkeling)| SCUBA DIVING (Not Deep Sea)
---|---|---|---|---
None| | | |

Warranty Instructions
Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.

Contact Us
For any further assistance or inquiries, please contact us at: Email : info@sylvi.in Phone : +1-123-456-7890

FAQ

How long is the warranty period?
The warranty period is six (6) months from the original date of purchase.

What does the water-resistant rating mean?
The water-resistant rating provides guidelines for appropriate water- related exposure to avoid damage to internal watch components. Please refer to the chart for recommended usage guidelines.

Can I replace the strap with a different width?
It is recommended to use a strap with a width of 23mm. A replacement belt of lug size 24mm is suggested for this watch.

Brief Introduction

Watch Dial

  • Diameter : 36mm

Watch Case

  • Height : 56mm
  • Diameter : 46mm
  • Thickness : l 7 mm

Strap

  • Width : 23 mm
  • Thickness : 4.44mm

Sylvi-3022BRW-Analog-Digital-fig- \(1\)

  1. A : Light Button
  2. B : Mode Change
  3. C : Reset Button
  4. D : Start/Stop Button

Water Resistant 3ATM

Operation Instructions

How to Set Time:

  • Analog Watch
  • Digital Watch

Analog Watch

  1. Pull out the crown to position B.
  2. Turn the crown either way to the correct time.
  3. Fix your correct time.
  4. Push in the crown to the position A (Normal).

Digital Watch
In normal mode, press B three times. You will enter into a setting mode where seconds will be flashing. Press D to zero.

  • Press C, the “Hours” will flash. Press D for adjusting “Hours”
  • Press C, the “Minutes” will flash. Press D to adjust “Min utes”
  • Press C, the “Month” will flash. Press D to adjust “Month”
  • Press C, the “Date” will flash. Press D to adjust “Date”
  • Press C, the “week” will flash. Press D to adjust “Day”
  • Press the B key to exit.

How to view Date
In normal mode, press and hold D.

How to Set Alarm:
In normal mode, Press B twice to enter Alarm mode and press C, “hours” will flash

  • Press D to adjust the hour for your alarm. Pay attention to am/pm, 12H display A/P means AM/PM, 24H display “H” means HOUR
  • Press C, minutes will flash. Press D to adjust minutes for your alarm
  • Press the B key to exit.

How to turn On/Off Alarm:
In normal mode press C & D simultaneously. If the Alarm on the display is highlighted, the Alarm is ON else OFF.

How to Set Stopwatch:
In normal mode, Press B lo enter Stopwatch mode Press D lo ‘Start/Slop”.

How to use Lap Timing:-
When the stopwatch is set to zero 100:00):

  • Press D to start the stopwatch
  • Press C to pause stopwatch
  • Press C to resume the stopwatch. [Stopwatch will resume from Elapsed timel

Battery Instructions

Sylvi-3022BRW-Analog-Digital-fig- \(6\)

A CR2025 batery cell for Digital and LR626 for Analog display

Strap Instruction

Sylvi-3022BRW-Analog-Digital-fig- \(8\)

  • The strap with 13.5cm at tail side and 8cm at buckle side.
  • The strap with 23mm width.
  • A replacement belt of lug size 24mm is suggested for this watch.

Water Resistant
For information about the water-resistant rating of Sports, Casual, Chronograph, and Slim watches please refer to page 3. The water resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see the chart for recommended usage guidelines. To ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:

  • Do not adjust the crown while the timepiece is in contact with water.
  • Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
  • For timepieces with pusher-enabled functionality, do not engage the function underwater.
  • Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
  • Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
  • Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water if rated 5ATM or higher and wipe dry with a soft cloth.

Recommendations For Water-Related Use

Sylvi-3022BRW-Analog-Digital-fig- \(9\)

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use. In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is not available, a watch of equal value and similar style will be provided.

This warranty does not cover:

  • Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
  • Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
  • Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
  • Products that are not purchased from an authorized retailer.
  • This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.

Get Additional Warranty

https://sylvi.in/warranty-registration Click Here to Open

FAQ’s

How to Claim Warranty?

Step 1:
Contact customer care and report your problem. An RMA ID will be generated (Without an RMA ID, the warranty cannot be claimed)

Step 2:
The product will have to be sent to the service center including the following information.

  • RMA ID – Given by customer care executive
  • Name
  • Full address
  • Daytime contact telephone number
  • Email address
  • Where your item was purchased from
  • Model reference of the item (Found on the back of your watch)
  • Full description of the work required
  • A copy of your proof of purchase

How to reach us?
For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 7.00 pm. (closed on National and Festival holidays).  If you are unhappy for any reason, please mail us at customercare@sylvi.in. We promise to reply by the next working day. www.sylvi.i

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals