Sylvi 1118 Imperial Collection Analog Mens Watch Instruction Manual

: June 14, 2024
: SYLVI

Table of Contents

Sylvi 1118 Imperial Collection Analog Mens Watch
Product Information
Product Usage Instructions
Brief Introduction
Operation Instructions
Strap Instruction
Warranty Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sylvi 1118 Imperial Collection Analog Mens Watch

Sylvi-1118-Imperial-Collection-Analog-Mens-Watch-
PRODUCT

Product Information

Specifications

Brand: Sylvi
Model: Race With Time
Type: Analog Watch
Color: Silver, Black, Black Blue, Gray
Website:www.sylvi.in

Brief Introduction

The Sylvi Race With Time watch is a stylish analog watch suitable for various occasions. It features a crown, watch dial, watch case, and a strap.

Crown:

The crown is used to adjust the date and time settings of the watch.

Watch Dial:

Diameter: 32mm

Watch Case:

Height: 54mm
Diameter: 45mm
Thickness: 12mm

Strap:

Width: 24mm
Thickness: 3.19mm

Product Usage Instructions

Operation Instructions

To set the date and time:

Pull out the crown to position B.
Turn the crown in either direction to correct the date.
Fix the correct date and again pull out the crown to position C.
Turn the crown in either direction to correct the time.
Fix the correct time.
Push in the crown to the position A (Normal).

Strap Instructions

To attach the strap to your wrist:

Push the two clasp release buttons on either side of the buckle to release the clasp.
The buckle will release and the hinges will open in an outward motion.
Insert the strap into the hole in the open hinges.
Set the strap into the lock hinges by inserting your back strap through the hole.
Once the strap is set into the lock hinges, press the buckle and hinges with one thumb and one finger. The watch will be set on your wrist.

Note: Do not operate the watch inside water.

Water Resistant

The Sylvi Race With Time watch is water-resistant up to 3 ATM (atmospheres). Please refer to page 3 for more information on water-resistant ratings and recommended usage guidelines.

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty.
The warranty covers manufacturing defects in the watch movement, hands, and dial only. If any covered components prove to be defective in material or workmanship under normal use, they will be repaired or the watch will be replaced free of component and labor charges.
In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is not available, a watch of equal value and similar style will be provided.
This warranty does not cover damage caused by unauthorized sales or service agents, unauthorized service, or other factors, not due to defects in materials and workmanship.
The warranty is void if the serial number, product date codes, or other tracking marks have been removed, altered, or obliterated.

FAQ

How do I claim a warranty?

To claim a warranty, please follow the instructions provided on the warranty registration page at https://sylvi.in/warranty-registration.

Brief Introduction

Watch Dial

Diameter : 32mm

Watch Case

Height : 54mm
Diameter : 45mm
Thickness: 12mm

Strap

Width: 24mm
Thickness: 3.19mm
A Light Button
B Mode Change
C Reset Button
D Start/Stop Button
Water Resistant 3 ATM

Operation Instructions

How to Set Date & Time :

Pull out the crown to position B.
Tum crown either way to correct date.
Fig on out eco ln to position C.
Turn the crown either way to the correct time.
Fix your correct time.
Push in the crown to the position A (Normal).

Strap Instruction

Push the 2 (Two) clasp release buttons on either of the buckles to release the clasp
The buckle will release and the hinges will open in an outward motion
Insert your back strap through the hole in the open the hinges and set the strap into the lock hinges
Once the strap is set into the lock hinges, press the buckle and hinges with one thumb and one finger. Now the watch will be set on your wrist

Note: Do not operate the watch inside water.

Water Resistant

If you want to know information about water-resistant rating for Sport, casual chronograph, and slim, please refer to.
The water-resistant rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components.
Please see the chart for recommended usage guidelines.
To ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:
Do not adjust the crown while the timepiece is in contact with water.
Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
For timepieces with pusher-enabled functionality, do not engage the function underwater.
Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water if rated 5ATM or higher and wipe dry with a soft cloth.

Warranty Instructions

Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only.
The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.
In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is not available, a watch of equal value and similar style will be provided.

This warranty does not cover:

Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
Damage resulting from improper handling, lack of care, accidents, normal wear and tear, or aging.
Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
Products that are not purchased from an authorized retailer.
This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number product date codes or other tracking marks have been removed, altered, or obliterated.

Get Additional Warranty

Click Here to Open https://sylvi.in/warranty-registration

How to Claim a Warranty?

Step 1: Contact customer care and report your problem. An RMA ID will be generated
(Without RMA ID, warranty cannot be claimed)

Step 2:

The product will have to be sent to the service center including the following information RMA ID – Given by the customer care executive
Name
Full address
Daytime contact telephone number
Email address
Where your item was purchased from
Model reference of the item (Found on the back of your watch)
Full description of the work required
A copy of your proof of purchase

How to reach us?

For any service-related inquiries and feedback, call our number +919687660234 Monday to Saturday, 10.00 am to 7.00 pm.
(closed on National and Festival holidays).
If you are unhappy for any reason, please mail us at customercare@sylvi.in.
We promise to reply by the next working day.