WORKPRO W082053A 24 Inch Wide Rolling Tool Storage Cabinet User Manual

June 3, 2024
WORKPRO

WORKPRO-W082053A-24-Inch-Wide-Rolling--Tool-Storage-Cabinet-
logo

WORKPRO W082053A 24 Inch Wide Rolling Tool Storage Cabinet

WORKPRO-W082053A-24-Inch-Wide-Rolling--Tool-Storage-Cabinet-
product

Demission

WORKPRO-W082053A-24-Inch-Wide-Rolling--Tool-Storage-Cabinet-
fig-1

WARNING:

  • To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
  • The tool cabinet only for indoor use. 2 persons are necessary for assembling.
  • Assembled incorrect may cause damage to the cabinet or failure resulting in personal.
  • All the connections have to be checked and the screws have to be tightened in regular periods.
PARTS INCLUDED TOOLS REQUIRED
 Locking bar ****

x1

|  | ****

Swivel casters

with brake: x2

| ****


| | |
 |
Top chest handle| x2|
 |
|  | Swivel casters without brake| x2
M4x8 Screw| x8|  | |

WARNING:

  • Do not open more than one loaded drawer at a time.
  • Do not put any tools on the door when opening. It may cause damage to the door or failure resulting in personal.

ASSEMBLY

Ensure all components are present. If any components are missing, do not proceed with assembly. Contact Brands customer services at service@greatstartools.com

  1. REMOVE THE 4 SCREWS ON BOTTOM
    Remove screws with a screwdriver.WORKPRO-W082053A-24-Inch-Wide-Rolling
--Tool-Storage-Cabinet-fig-8

  2. REMOVE THE SIDE PANEL
    Remove screws with a screwdriver.WORKPRO-W082053A-24-Inch-Wide-Rolling
--Tool-Storage-Cabinet-fig-9

  3. REMOVE CHEST
    Place the cabinet on a level surface. Slowly remove the chest from the cabinet .WORKPRO-W082053A-24-Inch-Wide-Rolling--Tool-Storage-Cabinet-
fig-10

  4. HANDLE ASSEMBLY

  5. CASTER ASSEMBLY
    If the caster assembly fits loose, using a screwdriver, slightly spread apart the split bearing on the shaft. If the caster fits tight, crimp split the bearing slightly with pliers. Make only slight adjustments, until caster fits properly.

  6. UNLOCK OR LOCK THE DRAWERS OF THE TOOL CHEST

  • Distributed by:

  • GREATSTAR INDUSTRIAL USA, LLC

  • 9836 Northcross Center Court, Suite A,

  • Huntersville NC 28078, USA

  • www.greatstartools.com

Documents / Resources

| WORKPRO W082053A 24 Inch Wide Rolling Tool Storage Cabinet [pdf] User Manual
W082053A 24 Inch Wide Rolling Tool Storage Cabinet, W082053A, 24 Inch Wide Rolling Tool Storage Cabinet, Rolling Tool Storage Cabinet, Tool Storage Cabinet, Storage Cabinet, Cabinet
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals