Leelbox DVB-T2 Digital Terrestrial TV Receiver HDMI Mini Stick User Manual

DVB-T2 Digital Terrestrial TV Receiver HDMI Mini Stick
User Manual

DVB-T2 Digital Terrestrial TV Receiver HDMI Mini Stick

This symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
When servicing use only identical replacement parts.
Package Contents
Before installation, please check the contents of the package.
The package should contain thefollowing items:

1. DVB- T2 TVReceiver – x1 pc
2. Remote Control – x1 pc
3. User Manual – x1 pc
4. Power adapter – x1 pc
5. Charging line – x1 pc
6. HDMI cable – x1 pc
7. Infrared receiving line – x1 pc

Front and Rear Panel

1. Front Panel
2. Rear Panel

1. ANT IN: antenna cable input.
2. ETHERNET: RJ4 5 Ethernet socket, for possible connection to the Internet network .
3. Type c USB : For the power suppl .
4. USB: For software upgrade and media playback .
5. Mini USB : Used for connecting infrared extension cables .
6. HDMI: High definition audio and video output used for connection to an HDMI device.

Remote Controls

1. Power TV key: turn on/ off the television
2. Power key: turn on/ off the appliance
3. SET key: con figure the remote control
4. TV/ AV key: configure the source of the television
5. VOL +: allow to adjust the intensity of the output audio of the linked TV
6. VOL -: allow to adjust the intensity of the output audio of the linked TV
7. PRV key ( red) : function available
8. V- Format key ( g reen) : selects the video resolution video ( 5 7 6 i/ p; 7 2 0 p; 1 0 8 0 i, 1 0 8 0 p)
9. Aspect key ( yellow) : selects theaspect ratio ( 1 6 : 9 o 4 : 3 )
10. Timer key ( blue) : function available
11. Fast backward key: fast- reverses a movie
12. Fast forward key: fast- forwards a movie
13. Skip back key: goes to the previous content
14. Skip forward key: goes to the next content
15. Play/ Pause key: play/ pause a content
16. STOP key: stops the display of multimedia content
17. Sub- T key: shows the subtitles ( if available)
18. Recall key: skips to the previous channel
19. EPG key ( GUIDE) : opens the electronic guideto the programs( if available)
20. INFO key: shows the information about the channel
21. Arrow keys: allow you to change channels in succession ( UP / DOWN arrow) and to adjust the audio volume ( left arrow LOW and right arrow HIGH)
22. OK key: confirms a selection or shows the TV List
23. MENU key: opens the main menu
24. EXIT key: exits from a menu
25. Audio key: selects the language of the program, if a different language is available. TTX key: activates the Teletext ( if available)
26. FAV key: creates and shows the list of the favorite channels
27. REC key: function available
28. PAGE+ e PAGE- keys: allow to navigate inside the menu .
29. Numeric keys 0 , 1….. 9 : allow to dial the desired channel number
30. Mute key: turn on/ off the volume; to turn on press it gain or use the volume keys .
31. TV/ Radio key: switches from TV channels to Radio channels and vice versa.

Remote control programming The supplied remote control can also be used to control another device equipped with an infrared remote control (for example the television). To make the remote control communicate with the TV you need to follow these steps:

1. Position the two remote controls of decoder and TV facing each other so that the two emitters look at each other without being obstructed
2. Press the SET button for 3 seconds on the remote control until the red LED lights up and stays on.
3. Press the key to be associated on the decoder remote control within 10 seconds.
4. Press the button to be associated on the TV remote control within 3 seconds. If the signal is received by the remote control, the red LED will flash 3 times and then remain on.
5. Press SET to confirm.
6. Repeat these steps for each button on the remote you want to configure

Tips:

• at the end of the programming process, check whether the key has been associated before continuing with the next
• in order to avoid confusion, associate the keys with the same function, for example in point 3 press the ON / OFF key on the remote control of the receiver and in point 4 press the same key on the remote control of the TV.

Attention: it is possible to associate only the buttons of the remote control supplied inside the white rectangle (ON / OFF, TV / AV; VOL + and VOL-). SET function key and cannot be associated.

Installating the Batteries
Remove the battery cover from the rear of the Remote Control and place 2 xAAA size batteries inside the compartment.
Please make sure the battery polarities match the polarity markings inside the compartment.

1. Open the cover
2. Install batteries
3. Close the cover

Using the Remote Control
To use the Remote Control, point it towards Infrared receiving line. . The Remote Control has a range of up to 7 metres from the Set Top Box at an angle of up to 60 degrees.

The Remote Control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the Remote Control.

System Connection

For a basic connection from your Set Top Box to your television set, use a direct HDMI connection.

First Time Installation

After all connections have been made properly, switch on TV and make sure the unit is connected to the Main Power.
If you are using the unit for the first time or have restored the unit to Factory Default, the Installation Guide Menu will appear on your TV screen.

1. [OSD Language] press RIGHT/ LEFT key to select a language.
2. [ Country] press RIGHT/ LEFT key to select your country of residence.
3. [ Channel Search] press RIGHT or OK key to begin Automatic channel search.
4. Once channel tuning is complete, you can start watching TV programs.

Basic Operation
( 1 ). Program Manage Settings
To access the Menu, press the MENU button and select [ Program], using the RIGHT/ LEFT keys to navigate through the menu. The Menu provides options to adjust the Program Manage Settings. Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

(a) Program Edit
To edit your program preferences ( lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password’00 000 0′ . The master unlock password is’88 888 8′ .

Set Favour its Channels
You can create a shortlist of favourite programs that you can easily access.
Set Favourits TV or Radio program

1. Select your desired channel then press the FAVOURITE button.
   A heart- shaped symbol will appear and the channel is marked as a favourite.

2. Repeat the previous step to select more Favourite channels.

3. To confirm and exit the Menu, press the EXIT key.

Disable Favourite TV or Radio Channel:
Select the Favorite channel and press Favorite button on the remote control to cancel.
View Favourite Channel

1. While in normal viewing mode, press Favourite button and the Favourite Menu will appear.
2. Press UP/ DOWN to browse through your Favourite Channels.
3. Press OK to select your favourite channel.

Delete a TV or Radio Program:

1. Select the Program and then press the BLUE button.
   A warning message will appear. Press OK to delete the channel.

2. Repeat the previous step to select more channels to delete.

Skip TV or Radio Channel:

1. Select the channel you would like to skip and press the GREEN button.
   Askip symbol is displayed. The channel is marked as a skip.

2. Repeat the previous step to skip more channels.

3. To save your settings and exit the menu, press EXIT key.

Disable the Skip Channel funtion:
Select the Skip channel and press the GREEN button on the remote control to cancel.
Move a TV or Radio Program:

1. Select the preferred channelthen press the RED button. Amove symbol will appear.
2. Press UP/ DOWN to move the channel.
3. Press OKtoconfirm.
4. Repeat the above steps to move more channels.

Look Program:
You can lock selected programs for restricted viewing
Lock a TV or Radio channel

1. Select the preferred channel then press the YELLOW button. A lock- shaped symbol is displayed.
   The channel is now marked as locked.

2. Repeat the previous step to select more channels.

3. To confirm your settings and exit the menu, press the EXIT button.

4. Press the YELLOW button to disable the locked channels function.

5. To view the locked channels, you will be requiredto enter either the default password ‘0 0 0 00 0 ‘ or your last set password. The master unlock password is ‘888888’.

(b) EPG (Electronic program guide)
The EPG is an on- screen TV guide that shows scheduled programs seven days in advance for every tuned channel. Press the EPG button on the Remote Control to access the guide.

You can use the UP/ DOWN key to select the preferred program. If there is more than one page of information, use the BLUE button for page up and the YELLOW button for page down.
You can select another channel’ s EPG by LEFT/ RIGHT buttons, view details of each EPG event by INFO button or schedule a recording by OK button. ( Please see page 13 of this manual for details in recording option)
(c) Sort
Sort your channels from the following options:
By LCN] – Sort the channels in ascending order.
By Service Name] – Sort the channels in alphabetical order. By Service ID] – Sort the channels according to the station. By ONID] – Sort the channels according to ONID.
(d) LCN (Logical channel number)
Set LCN on or off if you want to sort the channels manually.
(2) Picture Setting
To access the Menu, press MENU then select [ Picture] using the RIGHT/ LEFT key. The Menu provides options to adjust the video settings. Press UP/ DOWN to select an option and press RIGHT/ LEFT to adjust that setting. Press EXIT to exit the menu.

(a) Resolution
You can change this setting if the picture resolution does not appear to be correct. This setting is to match the most common setting for HDML [ 480i/480p]: for NTSC TV system.
[576i/576p]: for PAL TV system.
[7 2 0p/1080i/1080p]: for NTSC or PAL TV system.
(b) TV Format
If the picture does not appear to be correct you can change this setting.
This should match the most common setting for TVs in your country.
[ NTSC]: for NTSC system TV.
[ PAL] : for PAL system TV.
(3). Channel Search
To access the menu, press MENU and select [ Search Channel] using the RIGHT/ LEFT keys.
This Menu provides options to adjust the Search Channel settings.
Press UP/ DOWN to select an option and press RIGHT/ LEFT to adjust the settings. Press EXIT to exit the Menu.

(a) Auto Search
This option will automatically search for channels and save them once the scanning is complete. All previously saved channels and settings will be deleted.

1. Select [ Auto Search] and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT. Any channels that have been found will be saved.

(b) Manual Search
This option allows you to scan for new channels without deleting previously saved channels and settings.

1. Select [ Manual Search] then press OK or RIGHT. The channel search screen will appear.
2. Press the RIGHT/ LEFT key to select the channel frequency.
3. Press OK to start searching channels.
   If achannel is found, itis saved and added to the channels list. If channels can not be found during searching, the unit will exit automatically.

(c) Country
Select yourcountry of residence.
(d) Antenna Power
Enable Antenna Power if an external active antenna is connected.
(4) Time settings
Toaccess the Menu, press MENU then select [ Time] using the RIGHT/ LEFT keys. The Menu provides optionsto adjust thetime settings.
Press UP/ DOWN to select an option and press RIGHT/ LEFT to adjust the settings. Press EXIT to exit the menu.

(a) Time offset
Select auto or manual for GMT offset adjustments.
(b) Country Region
Select the Country Region when [ Time Offset] is set to Auto.
(c) Time Zone
Select the Time Zone Offset when [ Time Offset] is set to Manual.
(d) Sleep
Select sleep time. The unit will enter standby mode after selected time.
(5) Option
To access the Menu, press MENU and select [ Option] using the RIGHT/ LEFT keys. The menu provides options to adjust the OSD Language, Subtitle Language and Audio Language.
Select an option and press RIGHT/ LEFT to adjust the setting. Press EXIT to exit the Menu.

(a) OSD (On Screen Display)   Language
Select an OSD language.
(b) Subtitle language
Select the preferred subtitle language.
(c) Audio language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be used.
(d) Digital Audio
If no sound from audio amplifier which connectted to coaxial you can change this setting.
(6) System Setting
To access the Menu, press MENU and select [ System] using the RIGHT/ LEFT keys. The menu provides options to adjust the system settings.
Press the UP/ DOWN key to select an option and press RIGHT/ LEFT to adjust the setting. Press EXIT to exit the Menu .

(a) Parental Guidance
Set the age for parental control.
(b) Set Password
Set or change the password for locked programs. Enter your old password or the default password ‘0 0 0 00 0 ‘ . You will then be asked to enter your new password. Press OK button to confirm your new password. Once it is confirmed, press EXIT to exit the Menu. The master unlock password is’8 8 88 8 8 ‘ .
(c) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [ Restore Factory Default] using the RIGHT/ LEFT keys and press OK or RIGHT to select. Enter your password or the default password ‘0 0 0 0 0 0 ‘ and press OK to confirm. This option will delete all preset channels and settings. The master unlock password is ’88 888 8.’
(d) Information
View model, hardware and software information.
(7) USB
To access the Menu, press the MENU button and select [ USB] using the RIGHT/ LEFT keys.
The menu provides options to playback Music, Photo and Multimedia files. It can support MP3 , WMA, JPEG and BMP formats.

(a) Multimedia: When a USB device is attached you can select from the Music, Photo, Movie or PVRoptions in this menu using the RIGHT/ LEFT keys and OK to select. If a USB device is not connected, the warning message ” No USB device is Found” will appear.

(b) Photo configure:
– Slide Time: adjust slide show interval to 1 ~ 8 seconds.
– Slide Mode: adjust slide show effect as mode 0~59 or random. -Aspect Ratio:
[Keep]: Play picture in its original aspect.
[ Discard] : Play picture in full screen mode.
(c) Movie Configure
– Subtitle Specific: Select the subtitle size. Available settings are Small, Normal and Big.
– Subtitle BG: Select the subtitle background color. Available settings are Transparent, Gray, Yellowgreen and White.
– Subtitle Font Color: Select the subtitle font color. Available settings are White, Black, Red, Blue and Green.
(d) USB PVR Configure
– Record Device: Displays information of the connected USB storrage device.
– Format: Formats the connected USB device. ( ATTENTION IT WILL DELETEALL FILES! )
The most unique feature of the STB is its ability to record live TV. There are two ways you can do this. The first is to simply connect a USB storage device to your STB and press the record button on the remote. The other way is to schedule a program to record using the blue button or from within the EPG menu.
To schedule a recording follow the below steps:Press the blue button on the remote.
Press the red button to add a schedule.
Adjust the settings according to the schedule of the event. (Start-End time, record/view, etc.)
Press OK button
Press EXIT button

You will be able to select from the following two options:
Mode: View or Record
If at anytime you wish to delete a Scheduled event,you can press the blue button to view the list of scheduled events. Use the arrow keys on the remote to highlight the event you wish to delete then press the blue button to delete it.
The recording files can be deleted on this unit, you can go to the PVR,and press yellow button to delete it. The TV program is recorded to file at .PVR format, which can be played back on this unit and PC using a suitable player, but can not be played back on DVD or PDVD
For recording high definition TV programs,the version (and speed) of usb device should be 2.0 or above, otherwise the unit may not record the hd programs correctly.
When recording to usb stick or external hard disc on this model, you have to wait a few seconds before pushing rec. after inserting the media. Otherwise the unit can freeze in the signal.If that happens, then please take off power and connect again to fix this.
Note:

• We cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assume no responsibility for any loss of data that may occur when connected to this unit.
• With large amounts of data, it may take longer for the system to read the contents of a USB device.
• Some USB devices may not be properly recognised.
• Even when they are in a supported format, somefiles may not playor display depending on the content.-Please use externalAC-DC power adapter if the USB device current consumption larger than 500mA.

(e)Timeshift：

Press [Timeshift/Pause] key first, then at any time you can press [Play] key, the unit will start playing recorded program from the start.
Press [Goto] to select playing time, play time can not exceed the current time.
Press [Fast forward]/[Fast back] to move through current recording.
Note: Time shifting is only available when USB HDD is connected to system and read/write speed is high enough to support that.
Press [Stop] key first time to end the playing mode. The unit will keep recording but will return to current time. If you press [Pause] the playback will start again from the beggining of the recording. Press [Stop] key again to stop the recording.
(f) Recording
Press [REC] key can record current program to USB disc. Press [REC] repeatly to choice recording time. Press [INFO] key to see recording information during recording as below:

DVB T2 H.265
Full HD HDMI
MADE IN CHINA

Documents / Resources

| Leelbox DVB-T2 Digital Terrestrial TV Receiver HDMI Mini Stick [pdf] User Manual
DVB-T2 Digital Terrestrial TV Receiver HDMI Mini Stick, DVB-T2, Digital Terrestrial TV Receiver HDMI Mini Stick, TV Receiver HDMI Mini Stick, HDMI Mini Stick
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>