SYLVI Chronograph Watches Instruction Manual
- August 30, 2024
- SYLVI
Table of Contents
SYLVI Chronograph Watches
Function Instruction
Watch Dial
Diameter: 39mm
Watch Case
- Hight: 55mm
- Diameter: 46mm
- Thickness: 14mm
Strap
- Width: 22mm
- Thickness: 3.74mm
A Start/Stop Button
B Reset Button
Operation Instructions
How to Set Time
Chronograph Watch
- Pull out the crown to position C.
- Turn crown either way to correct time.
- Push in the crown to the position A (Normal).
How to set Date
- Pull out the crown Slightly to position B.
- Turn crown either way to correct Date.
- Fix your correct Date.
- Push in the crown to the position A (Normal).
Stopwatch Setting
- In normal mode pull the crown out to position C.
- Then Press A button till second to 0 position.
- Then Press B button till minute to 0 position.
- Push the crown back in.
Important Time keeping stops while the crown is pulled out. Correct the current time after performing the above operation
Using stopwatch
The stopwatch measures elapsed time in 1 second increment upto 29 minutes,
50 second.
- Press A button to start stopwatch then press A Button again to stop stopwatch. A & B buttons are use for start/stop stopwatch.
- In stop position press B button for reset timer.
Important Do not operate stopwatch with the crown pulled out.
Note An elapsed time operation will stop automatically at the end of 30
minutes
Battery Instructions
Strap Instructions
PU Strap
- The strap with 13cm at tail side and 8cm at buckle side.
- The strap with 24mm width.
- A replacement belt of lug size 24mm is suggested for this watch.
Leather Strap
- The strap with 13cm at tail side and 8cm at buckle side.
- The strap with 24mm width.
- A replacement belt of lug size 24mm is suggested for this watch.
Stainless steel strap
- The strap with 8cm at tail side and 8cm at buckle side.
- The strap with 24mm width.
- A replacement belt of lug size 24mm is suggested for this watch.
Water Resistant
For information about the water-resistant rating of Sports, Casual,
Chronograph, and Slim watches please refer to page 3.
The water resistant rating provides guidelines for appropriate water-related
exposure to avoid damage to internal watch components. Please see the chart
for recommended us-age guidelines.
To ensure water does not enter the watch and cause damage to it, please follow
the instructions listed below:
- Do not adjust the crown while the timepiece is in contact with water.
- Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
- For timepieces with pusher-enabled functionality, do not engage the function underwater.
- Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
- Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
- Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
- If rated 5ATM or higher and wipe dry with a soft cloth.
Warranty Instructions
Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.
In case of replacement, we cannot guarantee that you will receive the same
model watch.
If your model is not available, a watch of equal value and similar style will
be provided.
This warranty does not cover:
- Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
- Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
- Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
- Products that are not purchased from an authorized retailer.
- This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship. This warranty is void if the serial number or product date codes or other tracking marks have been removed, altered, or obliterated.
Get Additional Warranty
or
https://sylvi.in/warranty-registration
Click Here to Open
How to Claim Warranty?
Step 1: Contact customer care and report your problem. An RMA ID will be
generated (Without RMA ID, warranty cannot be claimed)
Step 2: The product will have to be sent to service center including the
following information.
RMA ID – Given by customer care executive
Name
Full address
Daytime contact mobile number
Email address
Where your item was purchased from
Model reference of the item (Found on the back of your watch)
Full description of the work required
A copy of your proof of purchase
How to Reach Us?
For any service-related inquiries and feedback, call our number +919687660234
Monday to Saturday, 10:00 am to 6:00 pm. (closed on National and Festival
holidays).
If you are unhappy for any reason, please mail us at
customercare@sylvi.in
We promise to reply by the next working day.