SYLVI Analog Urbane Silver Black Watch Instruction Manual
- September 2, 2024
- SYLVI
Table of Contents
SYLVI Analog Urbane Silver Black Watch
Brief Introduction
Function Instruction
Watch Dial
- Diameter: 30mm
Watch Case
- Height: 48mm
- Diameter: 41mm
- Thickness: 11mm
Stainless Steel Strap
- Width: 24mm
- Thickness: 4mm
Water Resistant
- 3 АТМ
Operation Instructions
How to Set Date & Time
- Pull out the crown to position C.
- Turn the crown either way to the correct time.
- Adjust your correct time & again push the crown to position B.
- Turn the crown either way to the correct date.
- Set your correct date.
- Push the crown to the position A (Normal).
How to Open / Close Buckle
- Find the small push button on the side of the clasp.
- Gently press the push button.
- As you press the button, you’ll notice the clasp opening.
- To close the watch band, position the two ends together and gently press it.
Battery Instructions
Strap Instructions
Stainless Steel Strap
The strap with 24mm width 4mm thickness & 16cm Length.
- A replacement belt of lug size 24mm is suggested for this watch.
Water Resistant
For information about the water-resistant rating of Sports, Casual,
Chronograph, and Slim watches please refer to page 3. The water-resistant
rating provides guidelines for appropriate water-related exposure to avoid
damage to internal watch components. Please see the chart for recommended
usage guidelines. To ensure water does not enter the watch and cause damage to
it, please follow the instructions listed below:
- Do not adjust the crown while the timepiece is in contact with water.
- Ensure the crown is in the closed position before contact with water.
- For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.
- For timepieces with pusher-enabled functionality, do not engage the function underwater.
- Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
- Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
- Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
- If rated 5ATM or higher wipe dry with a soft cloth.
Warranty Instructions
Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only. The covered components will be repaired or the watch will be replaced free of component and labor charges if it proves to be defective in material or workmanship under normal use.
- In case of replacement, we cannot guarantee that you will receive the same model watch.
- If your model is not available, a watch of equal value and similar style will be provided.
This warranty does not cover
- Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet; including plating on the case and/or bracelet.
- Damage resulting from improper handling, lack of care, accidents, normal wear and tear, or aging.
- Water damage if care instructions for the product’s water resistance levels (as per the product specification) were not followed.
- Products that are not purchased from an authorized retailer.
- This warranty is void if the watch has been damaged by accident, negligence of persons other than authorized sales or service agents, unauthorized service, or other factors not due to defects in materials and workmanship.
- This warranty is void if the serial number product date codes or other tracking marks have been removed, altered, or obliterated.
Get Additional Warranty
https://support.sylvi.in/warranty-registration
Click Here to Open
How to Claim Warranty?
Step 1
Contact customer care and report your problem. An RMA ID will be generated
(Without an RMA ID, the warranty cannot be claimed)
Step 2
The product will have to be sent to the service center including the following
information.
RMA ID – Given by customer care executive
Name
Full address
Daytime contact mobile number
Email address
Where your item was purchased from the Model reference of the item (Found on the back of your watch) Full description of the work required A copy of your proof of purchase
How to Reach Us?
For any service-related inquiries and feedback, call our number +919687660234
Monday to Saturday, 10.00 am to 6.00 pm. (closed on National and Festival
holidays).
If you are unhappy for any reason, please mail us at
customercare@sylvi.in.
We promise to reply by the next working day.