DGL Group BAPPTK2 Vibe E-Ssential Color Changing Light Bulb App Controlled Instruction Manual
- August 10, 2024
- DGL GROUP
Table of Contents
DGL Group BAPPTK2 Vibe E-Ssential Color Changing Light Bulb App Controlled
Instruction Manual
Operation Monuol FB-BAPP
1. Features
- Socket Type: E26 Standard • Voltage: AC 100-240V
- Wattage: 1.SW • Light Color: RGB
- Remote Battery: CR2025 (Battery included with remote) Remove safety strip before use.
- Battery voltage: 3V
- FCC ID, 2AANZBAPPTK2
- BT ID, XXXXX
2. Download Smart Life
- Search “Smart Life” from the Apple store or Google Play.
- Scan the OR code from the label or user manual. This opp is compatible with Andriod 5.0 8 10510.0 or higher
3. Log in I Register an account
Open the “smart Life” opp, sign up for a new account or log in with an existing account.
4. App Connection
- Install and power on the LED bulb. select the home icon within the app.(Make sure you’re Bluetooth is turned on before connecting.)
Press ·+· or • Add Device”. then click the Auto Scan tab on top. If you dld not turn on Bluetooth before connecting to the LED bulb. the opp will ask you to turn on Bluetooth.
The opp will automatically search for the LED Bulb. once found. click next to connect.
5. Timer Mode
6. Interface Introduction
- Color Light Mode
- Diy
Click to change the color. Long press to delete the color. Click each point to make the light consistent with the set color.
In order to use the bub with another smartphone, you have to remove the dexke
from the currently paired smartphone. Go to the product control
panel/dashboard, dick settings icon the top right then dick remove device. It
WII then be ready to pair to another smartphone.
If the cu•rentjy pair smartphore is not available, the b’db needs to be turned
on/off 3 tirnes using the gnt/power switch or remote, this WiII allow it to
pair to another s-nartphone
3. Scene
Choose from various scenes where the colors fade into other colors. total 38
scenes.
4. Music
The light will change its color and brightness following the music collected
by the microphone.
7. Remote Diagram
PREPARING THE REMOTE CONTROL
The battery has been pre-loaded into the battery compartment for your
convenience.
When using the remote for the first time, pull out the insulation sheet.
REPLACING THE BATTERY IN REMOTE
Remove the rear battery compartment door and open the battery compartment.
Insert a new CR202S battery into the compartment by matching the correct polarity. Replace the battery compartment and secure door with the screw.
****WARNING: TO AVOID BATTERY LEAKAGE
- Be sure to insert the battery correctly, and always follow battery manufacturers’ instructions.
- Always remove a weak or dead battery form the product.
- Remove the battery if the product is left unused for a long period of time.
****WARNING: TO AVOID BATTERY LEAKAGE
- The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222).
- Always purchase the correct size and grade of battery most suitable for intended use.
- Do not mix old and new batteries, alkaline, standard (Carbon-Zinc) or rechargeable (Nickel-cadmium) batteries.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with the regard to polarity(+ and -).
- Always remove batteries if consumed or if product is to be left unused for a long time.
****CAUTION:
LED Radiation DO NOT STARE INTO BEAM.
Class 2 LED Product
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (l)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Remove and immediately recycle or dispose of used batteries according to local
regulations and keep away from children. Do NOT dispose of batteries in
household trash or incinerate.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above 710C or incinerate.
Doing so may result in injury due to venting, leakage or explosion resulting
in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such
as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used
for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment
does not close securely, stop using the product, remove the batteries, and
keep them away from children.
WARNING
-
INGESTION HAZARD:
This product contains a button cell or coin battery. -
DEATH or serious injury can occur if ingested.
-
A swallowed button cell or coin battery can cause
Internal Chemical Burns in as little as 2 hours -
KEEP new and used batteries OUT OF REACH of CHILDREN
-
Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Company name: DGL Group, LTD.
Address: 2045 Lincoln Highway, Edison, NJ, 08817, USA
www.dglusa.com
Tracking number: DG043024
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>