rizoma PT415 Kit Porta Targa Fox User Manual
- June 25, 2024
- rizoma
Table of Contents
rizoma PT415 Kit Porta Targa Fox
Product Information
Specifications
- Product Name: Rizoma License Plate Holder
- Part Number: PT415
- Compatibility: Universal
- Difficulty Level: Simple
- Time of Assemblage: 25-30 minutes
Product Usage Instructions
To ensure the correct installation of the Rizoma License Plate Holder, follow these steps:
- Locate the part number PT415.
- Attach the plate for small license plates following the provided instructions.
- Locate the part number PT415.
- Attach the universal license plate holder following the provided instructions.
- Locate the part number PT415.
- Securely install the pin of positioning as directed.
- Locate the part number PT415.
- Install the license plate onto the holder following the provided guidelines.
Maintenance Instructions
- Regularly inspect your Rizoma License Plate Holder for any signs of damage such as leaks, bends, cracks, or wear.
- If any issues are identified, contact your authorized Rizoma dealer for inspection and potential replacement.
- Rizoma products may not be compatible with all motorcycles or aftermarket accessories.
- Contact your Rizoma dealer for guidance if needed.
FAQ
- Q: Can I modify or repair the Rizoma products myself?
- A: It is not recommended to repair or modify Rizoma products on your own. Always replace with original Rizoma components and consult your dealer for any necessary repairs.
- Q: How often should I inspect my Rizoma products?
- A: Regularly inspect your Rizoma products, especially after long trips or periods of non-use. The more you ride, the more frequent your inspections should be.
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand, and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case, never try to repair or modify the Rizoma products or their
components, always replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety, Rizoma suggests to
always contacting your RIZOMA dealer.
License plate
- To comply with the TÜV and European Norm in force, the installation of the license plate must be carried out as per the enclosed instructions.
- Consult the website www.rizoma.com, in the license plate support section, click “MEDIA” to download the PDF document approval ABE.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
- Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.
- WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install the turn license plate bracket or rear light or turn signals. The pins must always be isolated and respect the polarity in the connections. The warranty is not valid for any electric wire cutting or any product modification or tampering.
Installation Instructions
Step 1: INSTALL PLATE FOR MEDIUM/LARGE LICENSE PLATE.
Step 2: INSTALL PLATE FOR SMALL LICENSE PLATE
Step 3: INSTALL UNIVERSAL LICENSE PLATE
Step 4: INSTALL PIN OF POSITIONING
Step 5: INSTALL LICENSE PLATE
Step 6: INSTALL INDICATORS
Step 7: INSERT WIRINGS
Step 8: INSERT WIRINGS IN THE UNDER SEAT
Step 9: INSTALL LICENSE PLATE
ATTENTION: THE INSTALLATION OF THE RUBERRS AND THE BUSHINGS ARE SAME FOR THE 4 SCREWS.
Step 10: ADJUSTMENT REFLECTOR FOR THE LARGE LICENSE PLATE
Step 11: ADJUSTMENT REFLECTOR FOR THE SMALL LICENSE PLATE
ELECTRIC CONNECTIONS
Step 12
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based on contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the
- Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required.
- Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>