POWEROLOGY PWMIC2BK Wireless Lavalier Microphone Instruction Manual
- June 13, 2024
- POWEROLOGY
Table of Contents
PWMIC2BK Wireless Lavalier Microphone
Instruction Manual
Foreword
Dear user:
Thank you for choosing dual wireless camera microphone. In order to better
understand the use of this product, it is recommended that you read this
manual carefully before use.
Features
- Original lightning connector, no more worry about IOS ecosystem, and safe to use.
- Three-in-one universal receiver, lavalier design, compact and convenient.
- 2.4G wireless transmission technology, stable transmission distance can be up to 120 meters.
- Real-time monitoring, free switching of three volume levels.
- Three noise reduction modes can be switched freely, to meet accurate pickup in any complex environment.
- Support TF card local audio storage, no more worry about file loss.
- The microphone can be used as a recording pen alone, and the recording can be saved synchronously anytime and anywhere in any environment.
- Microphone and receiver with 3.5 mm cable which is used for camera can last 12 hours continuous interviews.
- Equipped with a charging case, the transmitter and receiver are more convenient to store and charge; interviews.
- The charging case has a large battery of 2000mAh that can be recharged, which is the first choice for travel and make a Live.
Applications
- Live, Vlog, Video-shooting, Interview and others.
Packing List
Charging case(two mic and one receiver) | 1PCS |
---|---|
Microphone transmitter | 2PCS |
3 in 1 Receiver | 1PCS |
Audio cable | 1PCS |
Charging cable | 1PCS |
Earphone | 1PCS |
Wind-proof | 2PCS |
User manual | 1PCS |
Specifications
Charging case
Input voltage: DC 4.8V~5.4V | Battery capacity: 2000 mAh |
---|---|
Charging time: 90 mins | Recharge times: recharge 3 times for microphone and |
receiver
Weight: about 128.2g| Charging case size: 1117934.4mm
Microphone specification
Frequency: 2.4GHz | Battery: 230mAh |
---|---|
Latency: 25 ms | Working time: 12 hrs |
Frequency response range: 20-20KHz | Charging time : about 80 mins |
DC: 4.8~5.4V | Weight: about 14g |
Sensitivity: -26 dBFS | S/N Ratio: 64 dB |
Microphone size: 47.115.0415.61mm |
Receiver specification
Frequency: 2.4GHz | Battery: 230mAh |
---|---|
Latency: 25 ms | Working time: 12 hrs |
Frequency response range: 20-20KHz | Charging time : about 80 mins |
DC: 4.8~5.4V | Weight: about 18.7g |
Microphone size: 47.513.477.95mm |
Functions
1.Charging case indicator light | 8.Indicator light on the receiver |
---|---|
2.Type-C charging port | 9.Lightning receiver |
3.3.5mm monitoring port | 10.Power /Mute key *2 |
4.3.5 mm adapter cable port | 11.Indicator light on the microphone *2 |
5.Type-C receiver | 12. Reset key on the transmitter *2 |
6.Power /reset button | 13.TF memory card slot *2 |
7.Volume/noise key |
Microphone transmitter functions
No. | State | Operation | Light |
---|---|---|---|
1 | **** Power on | 1. Open the charging case and take out the microphone | |
2. Click the power button | **** Green light for one second | ||
2 | **** Power off | 1.Put it in the charging case and close the cover | |
2.Press power button for 3 secs | **** | ||
3 | Search for pairing | No pairing object | Green light flashes slowly |
4 | Paired | Connection succeeded | Green light is always on |
5 | Clear pairing/re-pairing | Three-click the power button within 10 secs | |
after power on | Red and green light flashes quickly | ||
6 | **** Mute/pick-up | **** Click the power button to switch mute/pick- | |
up Mute: stop recording Pick-up: start recording | **** |
Mute: the green light flashes quickly
Pick-up: Green light is always on
7| Charging| Put it in the charging case and close the cover|
Charging: Blue light flashes
Fully charged: Blue light off
8| Low power| Below 3.3 V voltage| Red light flashes quickly
9| Automatic power-off| Below 3.3V or no connection for over 15 minutes|
Light off
10| TF card automatic Recording| After the connection is successful, it
will automatically enter the TF card recording mode.| Green light is always on
11| Use the microphone as a recorder alone no pair with receiver)| Click
the power button to switch to start recording / stop recording (auto save the
file)| Blue light flashes slowly when recording and green light flashes slowly
when stopping recording
12| when the microphone has no TF card| Recording fails| Blue light is
always on
13| The microphone has a TF card but the TF card is damaged| Recording
fails| Blue light is always on
Receiver functions
No. | State | Operation | Light |
---|---|---|---|
1 | **** Power on | 1.Open the charging case and take out the receiver | |
2.Click the power button | **** Green light for one second | ||
2 | **** Power off | 1. Put it in the charging case and close the cover | |
2. Press power button for 3 secs | **** | ||
3 | Search for pairing | No pairing object | Green light flashes slowly |
4 | Paired | Connection succeeded | Green light is always on |
5 | Clear pairing/re-pairing | Three-click the power button within 10 secs | |
after power on | Red and green light flashes quickly | ||
6 | **** Charging | Put it in the charging case and close the cover Mute: | |
stop recording Pick-up: start recording | Charging: white light flashes |
Fully charged: white light off
7| Mute/pick-up| Click the power button to switch mute/pick-up
Mute: stop recording
Pick-up: start recording| Mute: the green light flashes quickly
---|---|---|---
Pick-up: Green light is always on
8| Low power| Below 3.3 V voltage| Red light flashes quickly
9| Automatic power-off| Below 3.3V or no connection for over 15 minutes| Light
off
| Volume level switch| Click the volume key| The three levels are cycled in
turn
The prompt tone are as follows: ‘Beep” (Level 1) ‘Beep” “Beep” (Level 2)
Beep” “Beep”Beep” (Level 3)
The indicator lights are as follows: Red light flashes once (level 1) Red
light flashes twice (level 2) Red light flashes three times (level 3)
11| Noise reduction level switch| Double click the noise key| The three levels
are cycled in turn
The prompt tone are as follows: tong” (Level 1) tong Dong” (Level 2) tong Dong
Dong” (Level 3)
The indicator lights are as follows: Green light flashes once (level 1) Green
light flashes twice ( level 2) Green light flashes three times (level 3)
Charging case specification
No. | State | Operation | Light |
---|---|---|---|
1 | **** Charge the case | **** Charging with Type-C cable | Charging: red |
light is always on
Fully charged: the light is off
2| Battery level indicator of charging case| Open the
case/indicator light:100%-75%| Green light is on for 10 secs
Open the case/indicator light:74%-36%| Blue light is on for 10 secs
Open the case/indicator light:35%-13%| Red light flashes
3|
Charge two transmitters
| Put two transmitters in the case and close the cover| Charging: the
green, blue light flashes
Fully charged: corresponding lights are off
4| Charge the receiver| Put the receiver in the case and close the
cover| Charging: white light flashes
Fully charged: white light is off
5| Charge multiple device| **** Put two transmitters and receiver in
the case and close the cover| Charging: White, blue and green light flashes
alternately in turn
---|---|---|---
Fully charged: corresponding lights are off
Note: The TF card will automatically save a new recording file every
time. When the capacity of the memory card is full, the oldest recording file
will be automatically deleted.
Connection instruction
After taking out the device, the indicator lights of the microphones on the
receiver and transmitter are always green, it is paired successful. See as
below picture) Mobile phone
connection instruction
Plug the Lightning receiver/Type-C receiver into the Lightning port/Type-C
port of the mobile phone, and the green light of the receiver is always on,
and the microphone can be used to pick up sound. Camera connection instructions
Plug the 3.5mm cable into the receiver and the 3.5mm hole of the camera
respectively, the green light of the receiver is always on, and the microphone
can be used to pick up sound. Windows
Notebook Operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C jack of the
computer, or insert the 3.5 adapter cable to the audio input jack, click the
“Speaker” icon at the bottom right of the computer, and then open the sound
settings, “Sound” setting option and then click the bottom of the page to
select “Voice Input” option, select the corresponding “Microphone” option to
confirm.
Desktop Windows operation
Turn on the receiver, plug in the 3.5mm adapter cable to the audio input port
of the host computer, click the “Speaker” icon at the bottom right of the
computer, and then open the sound settings, the “Sound” setting option, and
then click the “Sound Input” option at the bottom of the page, and select the
corresponding “Microphone” option to confirm.
MacBook operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C socket of the
MacBook. On the MacBook, select the “Settings” option, then click the “Sound”
, then select the “Sound output” option, click to select “Speaker”, and then
confirm; then select the “Sound input” option, click to select “Microphone
-Wireless microphone” ,Click Confirm to use.
Turn on OTG (only for Android system)
Take OPPO A72 model as an example
Instructions for installing the receiver to the camera
Before installing to the camera, use the receiver’s back clip to clip on the
camera shoe and then fix. Wool cover installation instruction
Align the plastic buckle of the wool cover with the groove of the transmitter
, insert it and then rotate 90° clockwise to fix it.
Label Meanings
According to the test results obtained based on RL2004/108/EG (Electro
magnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive),
this product complies with the limits specified in the European Community EMC
(Electromagnetic Compatibility) Directive, an integration of relevant laws
from its member states.
**** Changes or modifications not expressly approved by the complying party
may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This symbol indicates that, according to WEEE (Waste of Electrical and Electronic Equipment)Directive(2012/19/EU) and national laws, this type of waste should not be discarded along with your household waste, as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources. For more information on disposal of WEEE products, please contact your local municipality, waste management bureau or household waste disposal service.
Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to oid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke,strange odor),please kill the power switch and unplug from power source, then send the product to the local dealer for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing,vibrating,or from blocking any ventilation openings, to prevent malfunction.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
- Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
About This Manual
This manual contains up-to-date technical specifications as of printing.
However specifications contained herein may not conform to your particular
product since Taster is constantly improving its products. For the latest
version/more information please visit our website: https://www.takstar.com/.
Specifications, devices or accessories available may vary from region to
region. If you have any questions, please contact our local dealer.
hey@powerology.me
www.powerology.me
power ology
powerology.me
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>