PELONIS PHT20A4ABWUK PTC Ceramic Heater User Manual

: August 10, 2024
: Pelonis

Table of Contents

PELONIS PHT20A4ABWUK PTC Ceramic Heater
Specifications
Product Information
Usage Instructions
Operating Instructions
FAQ
IMPORTANT INSTRUCTIONS
PART FIGURE
OPERATING INSTRUCTION
MAIN TECHNOLOGY SPECIFICATIONS
TROUBLESHOOTING
CLEANING AND STORAGE
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PELONIS PHT20A4ABWUK PTC Ceramic Heater

Specifications

Product: 23 Inch PTC Ceramic Heater
Model: PHT20A4ABWUK

Product Information

The 23-inch PTC Ceramic Heater is designed for well-insulated spaces or occasional use.
It comes with important safety instructions to ensure proper usage and avoid hazards.

Usage Instructions

Important Safety Instructions

Do not cover the heater to avoid overheating.
Replace damaged supply cords by a qualified person to prevent hazards.
This appliance can be used by children aged 8 years and above under supervision.
Keep the heater away from socket outlets and do not use it near water sources.
Children under 3 years should be supervised at all times around the heater.
Do not use the heater if dropped or damaged.
Ensure the heater is on a stable surface and away from flammable materials.

Operating Instructions

Before turning on the machine, ensure the power wire is in good condition. The product operates on a 220-240V AC power supply. When the set temperature is reached, the fan heater will stop, and it will restart heating if the temperature drops.

Press the Timer button to set the shutdown time.
Press the Timer button multiple times to adjust the timing.
To cancel timing, long-press the Timer button.

Press the Swing button during operation to start the swing function. Press again to stop the swing. The swing function stops when the heating stops.

FAQ

Q: Can children operate this heater unsupervised?
A: Children aged 8 years and above can operate the heater under supervision. Children under 8 years should not operate the heater without adult supervision.
Q: What should I do if the heater is dropped?
A: Do not use the heater if it has been dropped. Contact a qualified person for inspection and potential repairs.
Q: How should I clean and maintain the heater?
A: Refer to the CLEANING AND MAINTENANCE INSTRUCTION chapter in the manual for detailed guidelines on cleaning and maintenance procedures.

The device is only suitable for well-insulated spaces or occasional use.

IMPORTANT INSTRUCTIONS

Warning: To avoid overheating, do not cover the heater.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
The heater must not be located immediately below a socket outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate, and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Do not use this heater if it has been dropped.
Do not use if there are visible signs of damage to the heater.
Use this heater on a horizontal and stable surface.
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
Details concerning precautions during user maintenance.
Consider all the information, including the information contained in the “CLEANING AND MAINTENANCE INSTRUCTION” chapter.
Household use only.

PART FIGURE

OPERATING INSTRUCTION

Check before turning on the machine

Check if the power wire is in good condition.
The product adopts a 220-240V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe grounding device, otherwise, please replace it with the qualified socket.

Machine startup

The power light is lit after the plug is plugged in and the power is applied; the screen is off after a warning tone is heard and the screen is flickered once; the machine can be started after the switch key is pressed (or ON/OFF button on the remote controller is pressed). The machine will be operated under high gear working state by default when it is powered on for the first time; the screen displays “HI” and the Default setting temperature is 35°C.

Mode setting

When the Mode button is pressed, the operating mode will be switched in a sequence of “High”-“Low”-“Eco Energy Saving”-“High”

Temperature setting

When the fan Heater in ECO mode, the temperature can be set by pressing “+” or “-“, with the setting range of 5-35°C.
When the setting temperature is reached, the fan heater will stop the operation; when the temperature is lower than the set temperature, the machine will restart the heating.

Timer setting

After the machine is powered on, the shutdown time can be set through a short press of the ” Timer ” button.
The timing button is pressed for several times, and the timing time will be set
After the shutdown time is set, the timing can be canceled through the long press of the Timer button.

Swing function

When the machine is in operating mode, the “swing” button can be pressed to start the swing function; such function can be closed after re-pressing of this button;
After the machine stops the heating function, the swing function will be stopped.

Forced shutdown function

After the machine is powered on and started, it will be shut down forcibly in case of no valid operation after 12h continuous operation.

Short-circuit and open-circuit protection function of temperature sensor

In case the temperature sensor has a short circuit or open circuit, regardless of the mode, the digital screen will display “E2” or “E1” and be illuminated, at this time, the operation of any button is invalid, and the buzzer will be ringing for 10 times.

Safety protection

When it is in startup state, and when the indoor ambient temperature Th is higher than 50℃, the system will turn off all the outputs, the digital screen will display “FF” and be flickered for 10 times at a frequency of 1 time/second; at this time, pressing of any button will not work, and the protection can only be withdrawn after the power is cut off.

Rollover protection
When the machine is rolled over, the screen will display P4 and be shut down automatically, and several warning tones will be sent. In case the machine is aligned within 10 warning tones, the warning tone will be stopped.

Remote control

Control range of remote controller The remote controller control can be normally used within 5 meters in front of the product and in left and right angles of 30 degrees.
Please use a manganese or alkaline battery of type “AAA” and do not use a non-recyclable battery.

MAIN TECHNOLOGY SPECIFICATIONS

Power supply: AC 220-240V ~ 50Hz

MODEL

| POWER REGULATION RANGE (W)
---|---
LOW| HIGH| LOW OSC| HIGH OSC
PHT20A4ABWUK| 1200| 2000| 1200| 2000

TROUBLESHOOTING

If the product does not operate or does not operate properly, first check according to the following list.
If the reason the product does not operate or does not operate properly is not included in the following list, the product may have failed.
At this time, it is recommended to send the product to the dealer for treatment.

Problem	Possible Cause	Solution
After the power is engaged, the machine does not work.	The plug may not be
plugged well.	Check whether the plug is properly inserted into the

receptacle.
The machine suddenly stops during heating.| The temperature exceeds the threshold of the thermal cut- o.| Pull off the plug manually, and then insert it into the receptacle again when the machine is cooled.

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least one time during the operating season to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for offseason storage.

Turn the heater “OFF”, unplug it and wait for the heater to cool down.
Use a dry cloth to clean only the external surfaces of the heater.
Do not use any cleaning agents or detergents.
Never immerse the heater in water.
Pack the heater in the original carton and store it in a cool and dry place.

Warning: This heater cannot achieve accurate temperature control of the enviroment, and thus cannot be used as an insulation device for storage environment, items, animals and plants.