PELONIS PFG18L4AGWUK 7 Inch Air Circulator Fan User Manual

PELONIS PFG18L4AGWUK 7 Inch Air Circulator Fan

Product Information

Specifications:

• Model: PFG18L4AGWUK
• Size: 7-Inch
• Brand: Lifestyle Orchestra Co. Pte. Ltd.
• Address: 158 CECIL STREET#07-01/02 SINGAPORE (069545)

Product Usage Instructions

Cleaning Instructions:

1. Wipe the fan enclosure and rotor blade guard with a slightly damp cloth to clean the rotor blades.

Assembly Instructions:

1. Align the interface between the stand and the base, then rotate clockwise to tighten it.
2. Insert the connector under the motor house into the stand interface, then rotate clockwise to tighten it.
3. Place the rear grille against the motor housing and align the motor housing’s pin and rear grille’s hole.
4. Lock the rear grille by rotating the rear grille lock nut clockwise.

FAQ

Q: How do I clean the fan blades?

A: To clean the fan blades, wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

Q: How do I assemble the fan?

A: Follow these steps for assembly:

1. Align the stand and base interface, rotate clockwise to tighten.
2. Insert the connector under the motor house into the stand interface, rotate clockwise to tighten.
3. Place the rear grille against the motor housing, align pin and hole, then lock by rotating the lock nut clockwise.

SAVE THESE INSTRUCTIONS

Caution

• Read Rules for Safe Operation and Instructions Carefully.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.
• Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision.
• Never insert fingers, pencils, or any other object through the grille when fan is running.
• Disconnect fan when moving from one location to another.
• Be sure fan is on a stable surface when operating to avoid overturning.
• DO NOT use fan in window, rain may create an electrical hazard.
• Indoor use only

Warning

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
• When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
• Indoor and household use only.
• When the fan was assembled, the rotor blade guard shall not be taken off anymore.
• Prior cleaning unplug the fan.
• The rotor guard shall not be dissembled/opened to clean the rotor blades.
• Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

PARTS AND FEATURES

INSTALLATION INSTRUCTIONS

1. Base and Stand Connection
   Align the interface between the stand and the base, and then rotate clockwise to tighten it.

2. Stand and Motor Connection
   Insert the connector under the motor house into the stand interface, and then rotate cockwica to tianton it

3. Rear Grille and Motor Connection

   • First, remove the blade lock nut and rear grille lock nut from the motor assembly.
   • Place the rear grille against the motor housing and align the motor housing’s pin and reargrille’s hole.
   • Lock the rear grille by rotating the rear grille lock nut clockwise.

4. Blade Attachment

   • Place the blade through the motor’s shaft while aligning the shaft’s pegs with the blade’s slots.
   • While holding the blade, screw the blade lock nut on by rotating it counter-clockwise.

5. Front Grille Attachment
   Align the front grille’s arrow with the rear grille’s and snap the front grille in place with both hands. Then rotate the front grille’s arrow to the rear grille’s and fasten the screw.

Note: Two screws come in the package but only one is needed.

OPERATING INSTRUCTIONS

CLEANING AND MAINTENANCE

Precautions

• Be sure to unplug from the power supply before cleaning.
• Do not rinse the body directly with water.
• Never clean the product with any abrasive tools or solvents that will damage the surface; use a damp cloth to clean, and wipe promptly with a dry cloth.
• It is forbidden to disassemble the product for modification. Regular inspection and cleaning of the product is recommended in order to extend it’s service life.

DISPOSAL AND RECYCLING

This product complies with EU WEEE Directive and bears a classification symbol for waster electrical and electronic equipment (WEEE). This marking indicates that this product should not be disposal with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the dealer where the product was purchased. They can take this product for environmentally safe recycling.

SPECIFICATIONS

SERVICE AND SUPPORT

In the event of a warranty claim or if service is required for this product, please contact us at the following:

• E-mail: cs_eu@pelonis.com

• Company: KD EUROPE
• Address: Stara Debszczyzna 4,16-424,Filipow,PL
• Mail: Kdeurope.office@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>