V I V O MOUNT-WCT1 Water Cooler Truck Mount Instruction Manual

: August 9, 2024
: V I V O

Table of Contents

V I V O MOUNT-WCT1 Water Cooler Truck Mount
Product Usage Instructions
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O MOUNT-WCT1 Water Cooler Truck Mount

Specifications

Product: Water Cooler Truck Mount
SKU: MOUNT-WCT1
Weight Capacity: 44lbs (20kg)

Product Usage Instructions

Package Contents

(x1) Main Bracket
(x2) Strap
(x1) Upper Bracket
(x1) Lower Bracket

Included Hardware

(x10) M6x10mm Flathead Screw
(x3) M10 Washer
(x3) M10 Nut
(x3) M10x30mm Screw
(x3) ST10x30mm Screw

Tools Needed

Adjustable Wrench
4mm Allen Wrench

Assembly Steps

STEP 1
Connect the Lower Bracket (D) to the Main Bracket (A) using the M6x10mm Flathead Screws (S-A). Tighten screws using a 4mm Allen Wrench.
STEP 2
Connect the Upper Bracket (C) to the Main Bracket (A) using the M6x10mm Flathead Screws (S-A). Tighten screws using a 4mm Allen Wrench.
STEP 3
Secure the Upper Bracket (C) and Lower Bracket (D) to the Main Bracket (A) using the provided hardware: M10 Washer (S-B), M10 Nut (S-C), and M10x30mm Screw (S-D).
STEP 4
Thread the Straps (B) through the Main Bracket (A) to secure up to 5-gallon water jugs.

FAQ

What is the weight capacity of the Water Cooler Truck Mount?
- The weight capacity of the mount is 44lbs (20kg). Do not exceed this limit to avoid potential injury.
How can I get assistance if I receive damaged or defective parts?
- Contact our support team at 309-278-5303 or email help@vivo-us.com for immediate assistance. We are committed to replacing any damaged parts to ensure your product functions correctly.

Water Cooler Truck Mount

SKU: MOUNT-WCT1

Instruction Manual

Assembly Video & Product Info
www.vivo-us.com/products/mount-wct1

CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.

We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

Give us a Call:
309-278-5303

AVG. RESOLUTION TIME (within office hrs): 5M 4S

Chat Us
www.vivo-us.com

AVG. RESOLUTION TIME (within office hrs): < 15 M

Email Us
help@vivo-us.com

AVG. RESPONSE TIME (within office hrs): 1HR 8M

23% within < 15m
38% within < 30m
61% within < 1hr
83% within < 2hr
92% within < 3hr

Package Contents

Included Hardware

Tools Needed

Weight Capacity

ASSEMBLY STEPS

STEP 1
Connect the Lower Bracket (D) to the Main Bracket (A) using the M6x10mm Flathead Screws (S-A). Tighten screws using a 4mm Allen Wrench.
STEP 2
Connect the Upper Bracket (C) to the Main Bracket (A) using the M6x10mm Flathead Screws (S-A). Tighten screws using a 4mm Allen Wrench.
STEP 3
Metal Rail/Plate Installation : Hold the bracket assembly up to your desired mounting location and mark hole using a marker. Drill through holes using a 7/16” (11mm) drill bit. Attach the assembly using M10x30mm Screws (S-D), M10 Washers (S-B), and M10 Nuts (S-C). Tighten using a 17mm wrench.
Wood Board Installation : Hold the bracket assembly up to your desired mounting location and mark holes using a marker. Drill 1” (25mm) deep holes using a 9/32” (7mm) bit. Attach the assembly using ST10x30mm Screws (S-E) and M10 Washers (S-B). Tighten using a 17mm wrench.
STEP 4
Thread the Straps (B) through the Main Bracket (A) and secure up to 5 gallon water jugs.
LAST UPDATED: 01/08/24
REV1
v1.0