Televes RJ Series Cable Network Tester Instructions
- August 8, 2024
- Televes
Table of Contents
Televes RJ Series Cable Network Tester
Product Introduction
An essential tool for testing the quality of a cable network, it should always be used to ensure a correct installation. This compact device can test RJ45 network cables and RJ11/12 telephone cables as well as most types of data cables (Cat5, Cat6 and ISDN)
Ref.236790
- Art.Nr NWT
- EAN13 8424450316542
Specifications
- Product: Cable Network Tester
- Functionality: Data and telephony testing for Cat5/6, RJ11, RJ12, RJ45, ISDN cables
- Model: Ref.236790
- Art.Nr EAN13: NWT 8424450316542
- Power Supply: 9V battery (not included)
- Maximum Test Cable Length: 300 meters
- Features: LED indicator, quick or long test option, automatic testing for through, open connection, broken connection, and crossed pairs
- Size: 180 x 110 x 35 mm
Product Usage Instructions
- Insert a 9V battery into the tester if not already installed.
- Choose the appropriate cable type to test (RJ45, RJ11/12, Cat5, Cat6, ISDN).
- Connect one end of the cable to be tested into the corresponding port on the tester.
- Connect the other end of the cable to its destination point.
- Turn on the tester and select the desired testing mode (quick or long test).
- Observe the LED indicators for testing results (through, open connection, broken connection, crossed pairs).
- For inaccessible cables, use the long-distance testing feature.
- After testing, disconnect the cables and power off the tester.
Highlights
- LED indicator
- Possibility to test even inaccessible cables over long distances
- Choice of quick or long test
- Power supply 9 V battery (not included)
- Maximum test cable length: 300 metres
- Automatic testing and monitoring of through, open connection, broken connection and crossed pairs
- Size: 180 x 110 x 35 mm
FAQ
-
Q: What should I do if the LED indicators show crossed pairs during testing?
A: If crossed pairs are detected, recheck the cable connections and ensure proper alignment with the tester ports. -
Q: Can this tester be used for coaxial cables?
A: No, this tester is specifically designed for RJ45 network cables, RJ11/12 telephone cables, Cat5, Cat6, and ISDN cables. -
Q: How often should I replace the 9V battery in the tester?
A: It is recommended to replace the battery when the tester shows signs of low power or at least once a year for optimal performance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>