Televes 531911 SmartKom Intelligent Mast Amplifier User Manual
- June 1, 2024
- Televes
Table of Contents
Televes 531911 SmartKom Intelligent Mast Amplifier
®martKom intelligent mast amplifier Autoprogramming, or manual programming
via Bluetooth® (ASuite)
filters, mixes, amplifies and balances at the touch of a button
Compact and intelligent amplifier for mast installation with digital channel
processing, designed for family-houses installations. Equipped with 3 inputs
to amplify terrestrial signals (VHF+UHF) in which each channel can be
individually filtered by any of the 32 available programmable filters. In
addition, it includes an input for mixing FM radio.
The amplifier is supplied with a 12V (800mA) domestic power supply that is
inserted into the coaxial installation and powers it through its output
connector.
The autoprogramming function of the amplifier gives this device the ability to program and adjust by itself, simply by pressing a button. In addition, thanks to the Bluetooth® antenna included into the PSU, manual or automatic programming of the amplifier can be done wirelessly using a smartphone or tablet, with the ASuite application.
RED compliant
Ref.531911
Art.Nr SMARTKOMMV
EAN13 8424450266250
Highlights
- “All-in-one” device: it combines the functions of several elements of an installation such as filters, mixers and amplifiers, supplying a complete signal distribution under a single coaxial cable
- Plug&Play: the amplifier automatically program and adjusts the channel level by pressing the auto programming button. In addition, SmartKom automatically powers the antenna in case the signal requires it
- Digital processing of the channels: a perfect balance of signal level between different channels is obtained at the output
- Automatic gain regulation of signal in each filter (AGC)
- Great signal quality: the installation of this device immediately after a Televés intelligent antenna prevents signal degradation and results in the best quality
- High selectivity digital filters (28dB@1MHz)
- SAW filter (Surface Acoustic Wave) included for high rejection of 4G/5G telephone interferences
- Indoor power supply included, with a Bluetooth® antenna for wireless manual programming of the amplifier Wireless manual or automatic programming (via Bluetooth®) through a smartphone or tablet with the ASuite app, avoiding having to physically go to the mast
Main features
- Secure configuration: in case of electrical failure SmartKom saves the current configuration, avoiding configuring it again.
- High output level.
- EasyF connection system: a reliable and safe system, saving installation time and without the need for additional connectors.
- LEDs indicators displaying both adjustment and programming status on the amplifier and on the power supply.
- High shielding chassis, made of Zamak.
- A white ABS-plastic case is included to provide greater resistance against meteorological factors in its outdoor installation.
- 100% European design and manufacturing: fully automated manufacturing, subject to the most stringent quality controls.
Discover
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the
coaxial cable is directly inserted in the device, thus improving connection
reliability. Thanks to the absence of F connectors, the chassis can be reduced
and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room.
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off.
- Cost savings: no additional connectors are required (neither F nor IEC).
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier.
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device’s cover to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed.
- Failure rate reduction: usually produced as a result of cold soldering joints.
- Electromagnetic behaviour optimization: for high frequencies.
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced.
Application example
SmartKom mast amplifier installation in a single family
house
The device is installed on the antenna mast and is powered through the coaxial
output connector.The PSU is located indoors and includes a Bluetooth® antenna
to wireless program with ASuite App.
Technical specifications
SMARTKOM MAST AMPLIFIER
Inputs/Bands| 3x VHF+UHF| FM
Frequency range| MHz| 174-230/470-694| 87.5-108
Input dynamic range| dBμV| 40-80| –
Maximum gain| dB| 45| -1
Gain regulation| dB| AGC| –
Number of filters| 32| –
Channels per filter| 1| –
Channel/filter programming| 5-12 (VHF)
21-48 (UHF)
| –
Filtered channel level regulation| AGC per filter| –
Selectivity| dB| 28/12 @1MHz*| >20 @20MHz
Output level| dBμV| 82 (VHF)
85 (UHF)
| –
Vout regulation| dBμV| 57-82 (VHF)
60-85 (UHF)
| –
Manual regulation| dB| ±3| –
Noise figure| dB| 7 (VHF)
6 (UHF)
| –
Powering inputs| Vdc| 12 (AUTO/ON/OFF)| –
Max. consumption inputs| mA| 70| –
Max. consumption| mA| 500 (@12V w/o DC IN)
Protection index| IP| 23
Operating temperature| ºC| -5 … +45
*With adjacent channels: 28dB // Without adjacent channels: 12 dB
| POWER SUPPLY UNIT | Ref. 550210 |
|---|---|
| Inputs | TV-MIX |
| Frequency range | MHz |
| Output voltage | V |
| Maximum output current | mA |
| Insertion loss | dB |
| Mains voltage | V~ |
| Maximum consumption | W |
| Maximum current | mA |
| Protection index | IP |
| Operating temperature | ºC |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>