Televes 234758 Wavelength Division Demultiplexer Instruction Manual
- June 1, 2024
- Televes
Table of Contents
Televes 234758 Wavelength Division Demultiplexer
Description
Wavelength Division De multiplexer.
Application example
Safe installation
- Read these instructions before handling or connecting the equipment. Keep these instructions. Heed all warnings. Follow all instructions.
- Clean only with dry cloth.
- Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as glasses, shall be placed on the apparatus.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Please allow air circulation around the equipment.
- Do not place the equipment in a highly humid environment.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place naked flames, such as lighted candles on or near the product.
- Do not place the equipment in a place where it can suffer vibrations or shocks.
- Only use attachments/accessories specified by the manufacturer.
Safe operation of equipment
- Ambient temperature should not be higher than 45ºC.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Precautionary measures with the optical connection point
- For the optical connection, a single mode fibre cable is used with five SC/APC-type connector (COM).
- Keep the connector covers and cable caps in a safe place in case they are needed in the future.
- Carefully align the guides on both connectors when connecting a cable to the device, then push the connector completely.
- Take special care to avoid damaging the unprotected ends of the connectors, as small scratches, impurities and/or particles of dirt, oil, grease, sweat etc. may significantly affect the quality of the signal.
- To clean the ends of the connectors, gently rub with a lint-free lens cleaning cloth, dampened using additive-free isopropyl alcohol. Make sure the alcohol evaporates fully before connecting.
- Always fit the covers on the connectors of devices that are not connected to cables to prevent the laser beam from damaging the eyes.
Safety measures
Warning.-
This product allows the pass of invisible laser light, suitable only for
operation with class 1M or lower optical sources. See levels in technical
specifications table.
Avoid contact with laser radiation. The use of equipment such as binoculars or
magnifying glasses may increase damage caused to the eyes.
Maximum Laser radiation emission : 22dBm
Wavengths emitted : 1570, 1550, 1530, 1510
Caution
- The use of controls or adjustments or any other procedures other than those specified in this manual may lead to exposure to harmful radiation.
- Do not use the equipment in any way that does not comply with the operating instructions or in any conditions that exceed the stipulated atmospheric specifications.
- This equipment is not user-serviceable. Should you require assistance, contact our technical service department.
- Never point the laser beam intentionally at people or animals.
CUSTOMER SUPPORT
Televes, S.A.U., CIF: A15010176, Rua/Benefica
de Conxo, 17, 15706
Santiago de Compostela, SPAIN
tel.: +34 981 522200,
televes@televes.com
https://qr.televes.com/A90060
2023 © Copyright, Televés S.A.U.
Read User Manual Online (PDF format)
Loading......