Televes 769501 Onto Network Optical Terminals Instructions

June 3, 2024
Televes

Televes 769501 Onto Network Optical Terminals Instructions
Televes 769501 Onto Network Optical Terminals

Introduction

  • ONT OFFICE
    769501 
    ONTO **

**

  • ONT HOME
    769502
    ONTH

  • ONT HOME AC
    769514
    ONTHACN

  • ONU BASIC
    769507
    ONTB

  • ROOM ONT
    769509
    769564
    ONTPOEH

Network optical terminals that are responsible for delivering the contracted services to their final destination.
Its connectors have multiple-play signals such as High Speed Internet (HSI), VoIP, WiFi, TV (IPTV and/or RF Overlay).

  • Televés S.A.U. hereby declares that the 769501, 769502, 769514 and 769564 radioelectrical equipment complies with EU Directive 2014/53. The full text of the EU declaration of conformity is available via the following link: https://doc.televes.com.

Important safety instructions

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
  10. Only use attachments/accessories specified by the manufacturer.
  11. Unplug this apparatus during lightning storms or when unused for long periods of time.
  12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning

  • Reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as glasses, shall be placed on the apparatus.

Safe operation

  • Power requirements for this product are100- 240V~ 50/60Hz.
  • To disconnect the equipment from the mains pull the plug never the cable.
  • It is strongly recommended not to connect the equipment to the mains until all connections have been done.
  • The socket outlet shall be installed near the equipment and shall be easily accessible.

Safe installation

  • Ambient temperature should not be higher than 113°F.
  • Do not place the equipment near heat sources or in a highly humid environment.
  • Do not place the equipment in a place where it can suffer vibrations or shocks.
  • Please allow air circulation around the equipment.
  • Do not place naked flames, such as lighted candles on or near the product.

Optical connection instructions

  • An SC/APC single mode fiber cable must be used.
  • Keep the connector covers and cable caps in a safe place in case they are needed in the future.
  • Carefully align the guides on both connectors when plugging a cable to the device, then push the connector all the way in.
  • Take special care to avoid damaging the unprotected ends of the connectors, as small scratches, impurities and/or particles of dirt, oil, grease, sweat, etc. may significantly affect the quality of the signal.
  • To clean the ends of the connectors, gently rub with a lint-free lens cleaning cloth, dampened using additive-free isopropyl alcohol. Make sure the alcohol evaporates fully before connecting.
  • Always fit the covers on the connectors of devices that are not connected to cables to prevent the laser beam from damaging the eyes.

Safety measures

Warning
This product emits an invisible laser beam.
Avoid contact with laser radiation. The use of equipment such as binoculars or magnifying glasses may increase damage caused to the eyes.

Caution.

  • The use of the equipment in any other way than the specified in this manual may lead to exposure to harmful radiation.
  • The use of the equipment in any other way than the specified in this manual may lead to exposure to harmful radiation.
  • Do not use the equipment in any way that does not comply with the operating instructions or in any conditions that exceed the stipulated atmospheric specifications.
  • The user cannot service this equipment. For technical assistance, contact our technical assistance department.
  • Never point the laser beam at people or animals.

Symbology

| Equipment designed for indoor use.
---|---

Caution.
RISK OF ELECTRIC SHOCK DONOT OPEN.

| To avoid the risk of electric shock, do not open the power supply
| The equipment complies with the requirements of the CE mark.
| This symbol indicates that the power supply complies with the safety requirements for class II equipment.
| The present product can not be treated as normal household waste, it must be delivered to the corresponding collection point for waste electrical and electronic equipment (WEEE).
| The product is EAC certified.

Connectors

  1. Power input
  2. Power switch
  3. Analogue telephone connectors (FXS)
  4. Local area network connectors (LAN)
  5. Radio frequency connector (RF)
  6. Reset Button
  7. SC/APC optical connector
  8. USB Port.
    Connectors

Reference|  | 769501
ONTO| 769502
ONTH| 769509
ONTPOEH| 769514 / 769564
ONTHACN /  –| 769507
ONTB
---|---|---|---|---|---|---
Models|  | ONT| ONU
OFFICE| HOME| ROOM| HOME| BASIC
RF-Overlay|  | –| √| √| √| –
WiFi (802.11 b/g/n)
(2×2) 2.4| GHz| √| √| –| –| –
WiFi (802.11 b/g/n)
(3×3) 2.4| GHz| –| –| –| √| –
WiFi (802.11 b/g/n/ac) (4×4) 2.4/5| GHz| –| –| –| √| –
USB| 2| 2| 2| 1| –
FXS Ports| 2| 2| 2| 2| –
ETH 10/100/1000BASE-T

Ports

| 4| 4| 4

(PoE-30W)**

| 4| 1
NAT/NAPT| √| √| √| √| –
Firewall| √| √| √| √| –
VPN pass-through| √| √| √| √| –
PPPoE Terminal| √| √| √| √| –
OMCI| √| √| √| √| –
TR-069| √| √| √| √| –
CLI| √| √| √| √| –
WebGUI| √| √| √| √| –
General
Power| V| 12| 12| 56| 12| 12
Max. current| A| 1,7| 1,7| 1, 08| 3| 1
Consumption| W| 20.4| 20.4| 60.5| 36
| 12
Temperature conditions| ºC / ºF| -5… 50 / 23…122
Relative humidity| %| 0…95
Dimensions (xyz)| mm inch| 210 x 40 x 210
8.25 x 1.57 x 8.25| 35 x 244 x 202
1.37 x 9.60 x 7.95| 142 x 30,5 x 112
5.59 x 1.20 x 4.40

  • WARNING (Ref. 769514):
    If using the USB port, it may exceed the recommendation for the ONT power source.

  • WARNING (Ref. 769509):
    The PoE ports of this ONT can be configured in two ways: 1 port of up to 30W of power, or 4 ports of up to 6.49W of power each.

DECLARATION OF CONFORMITY

https://doc.televes.com

Fabricate /Manufacturer
www.televes.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals