Televes MOSAIQ6 Tablet Style Handheld Digital Signal Meter User Manual
- May 15, 2024
- Televes
Table of Contents
- Televes MOSAIQ6 Tablet Style Handheld Digital Signal Meter
- Gesture commands
- Custom display
- Autonomy
- Convenience
- Maximum protection
- Efficient and centralized management
- ULTRA-FAST SPECTRUM ANALYSER
- CONSTELLATION AND ECHOES
- MULTISTANDARD
- OPTICAL MEASUREMENTS
- NETWORK TOOLS
- PASS/FAIL INDICATORS
- 100% AUTOMATIC
- SATELLITE IDENTIFICATION
- USER PROFILES
- MEASUREMENT STORAGE: MACROLOGS AND DATALOGS
- User manual on display
- 4K UHD
- Technical specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Televes MOSAIQ6 Tablet Style Handheld Digital Signal Meter
Specifications
- Model: MOSAIQ6 spectrum analyzer
- Features: Advance functionalities, high accuracy measurements
- Interface: Touch screen with gesture commands
- Display: 8″ high resolution screen
- Battery: Li-Ion, up to 4 hours average range
- Dimensions: 220 mm x 260 mm x 65mm
- Weight: 5,628.00 g (net), 5,628.00 g (gross)
Product Usage Instructions
Custom Display Configuration
- Tap on the screen to access the menu.
- Select “Customize Widgets” option.
- Choose up to 6 widgets to display simultaneously on the screen.
Battery Management
- To charge the battery, use the stand-alone charger provided.
- Replace the battery easily for uninterrupted operation.
- Keep a backup battery for continuous usage during long working hours.
Ergonomic Design
- Hold the meter with one hand comfortably due to its sleek design.
- Access menus and buttons easily with one hand for maximum movement efficiency.
FAQ
-
Q: How do I customize the display on MOSAIQ6?
A: Navigate to the menu, select “Customize Widgets,” and choose up to 6 widgets to display simultaneously. -
Q: What is the average battery life of MOSAIQ6?
A: The high-quality Li-Ion battery provides an average range of up to 4 hours. -
Q: Can I charge the battery while using the meter?
A: Yes, you can charge the battery using the stand-alone charger even while using the meter for convenience.
MOSAIQ6 spectrum analyzer
The power of user experience
MOSAIQ6 is a high-performance portable meter for professional installers,
which includes advance functionalities and high accuracy in the measurements.
Thanks to its congurable interface, you choose which widgets (up to 6) you
want to simultaneously display in the 8 high-resolution screen. Check the
installation status at a glance. This new interface has been designed and also
programmed to take full advantage of a touch screen with touch gestures. Only
in this way is it possible to operate so easily a meter with so many
performances.
The meter is supplied in a carrying bag or transport case (according to
reference), and a complete accesory kit is included to make easier its use by
the installer:
- Screen protector
- Adjustable strap
- Coaxial connectors and adapters set
- Fiber optic adapters set
- Coaxial cable lead
- 3 ber patch-cords and 1 ber adapter cord
- Fiber optic cleaning set, with sticks and
- alcohol wipe
- 3 velcro anges
- RJ45 patch-cord
- Regular and lighter-type chargers
Highlights
- A true touch screen to take full advantage with touch gestures
- Thanks to its configurable interface, you choose which 6 widgets you want to simultaneously display in the 8″ high resolution screen
- Ultra-fast spectrum analyzer: Real time digital processing
- Always ready: Field-replaceable battery
- Ergonomics: Optimized shape to maximize the effectiveness of movement
- Efficient management: Meter always updated with the cloud
Gesture commands
An actual touch screen
This new interface was designed and programmed to take full advantage of the
touch gestures (tap, double-tap, long press, swipe, drag, pinch or spread).
The only means to work as easily with a very high-performance meter.
Custom display
User customizable widgets
MOSAIQ6 provides full flexibility when it comes to configuring the screen
format to the dimensions you require. It is the core of the meter: “The Power
of User Experience” means the configuration of the equipment is driven by your
tastes and preferences.
Autonomy
- Long-lasting battery: The high-quality Li-lon battery provides an average range up to 4 hours.
- Always ready: For the meter to run out of battery is no longer a problem; it will always be ready thanks to the field-replaceable battery. Furthermore, with just two batteries the meter will have enough autonomy during long working hours.
- Stand-alone charging: Thanks to its stand-alone charger, the battery can be charged without being connected to the meter. Work can thus proceed anywhere while the backup battery is charging.
Convenience
- Ergonomy: With a sleek design and adequate dimensions (220 mm x 260 mm x 65mm), the meter provides an optimum way to maximize movement efficiency by allowing menu and button access with a single hand.
- Easy to carry: Thanks to its carrying bag or case, the meter can be easily carried around. It is equipped with several internal compartments to store a replaceable battery, for example.
- Self-supporting: To make fieldwork easier, the meter is compatible with a standard tripod: it is equipped with a universal 1/4″ threaded port on the backside.
Maximum protection
- Robustness: Its double-injection polycarbonate plastic rubber casing provides an outstanding impact resistance, while minimizing the falling risks. • Weather resistant: Thanks to the high-quality materials and the water-proof screen, the meter is prepared to withstand adverse weather conditions
- Protected termination: Signal inputs are equipped with a cap, while the other central connectors and the power supply are protected with a cover, also used as a support when the meter is used on a flat surface.
Efficient and centralized management
thanks to MyCloud web portal
It is possible to centralize the management of all meters registered in the cloud in a single web interface accessible from any device. Thanks to this portal, the installer can be connected in real time, either to configure the equipment or to consult and to capture the last measurements made. MyCloud provides the necessary flexibility, mobility and comfort so that any single detail of the installation to be measured is missed. More information: mycloud.televes.com
ULTRA-FAST SPECTRUM ANALYSER
MOSAIQ6 makes it possible to capture interfering signals, as fast as they may be Professional spectrum analyzer with ultra-fast digital processing (sweep time < 10 ms) and high dynamic range (> 50 dB). Equipped with advanced functions for the detection and analysis of signals in the 5 MHz to 3,300 MHz (waterfall, event triggers, markers, user configurable RBW and VBW, etc.).
WATERFALL
Signal graphic display in both time and frequency
Signal levels turn into colours and are represented on the time axis (see figure). The perfect tool for short signal interference or fading analysis, which observation would be difficult by only resorting to the spectrum.
CONSTELLATION AND ECHOES
Knowing the impact on MER is essential
The constellation diagram is essential to help detect the presence of noise,
phase jitter, interference and other potential problems that could impact the
signal quality by reducing MER. The echo graphic display allows echo detection
in DVB-T/T2 terrestrial signal reception, which could severely degrade BER
measurement.
MULTISTANDARD
All in one
A single meter is capable of analyzing and measuring analogue and digital
signals, both on the terrestrial and the satellite bands (FM, IPTV, optical
fibre, Wi-Fi, DVB-T/T2, DVB-C Annex A, B, and C, and DVB-S/S2/S2X).
Furthermore, the DAB and DAB+ analysis can be included as an option.
OPTICAL MEASUREMENTS
New high-capacity networks can now be measured
Once the optical fibre input enabled, and thanks to the optical receiver
(whether selective or not), optical attenuation measuring can proceed for
three wavelengths (1310 nm, 1490 nm, and 1550nm) and their powers, as does
RFOG installation analysis.
IPTV
Beyond radio frequency
Allows the demodulation and analysis of IPTV streams (both Unicast and Multicast), not only through video display but also by displaying the total bit rate and the relevant information for each service: SID, VPID, AID, video profile, bit rate for both audio and video. In addition, specific protocol measurements are also analyzed, such as UDP Payload Bitrate, IP payload bitrate, and Packet arrival minimum.
NETWORK TOOLS
Connectivity and network monitoring, in a single interface
This functionality offers several control utilities and network monitoring, which can be displayed in mosaic mode. All network information at the same time, on a single screen (IP, DNS, gateway, connection mode…). These tools allow you to recognize a network by auditing the response time (latency or ping) and the connection speed (speed test, upload/download). In addition, they also make easier the detection of connectivity problems by scanning connected equipment (ARP scan) and mapping their ports, whether open or closed, to determine their accessibility (NMAP).
LTE CHECK
An interference-free installation
It analyses the impact of the LTE signal on the DTT channels, and detects whether the use of filters is required. Furthermore, it allows spectrum simulation upon the introduction of the LTE filter recommended by the meter itself. A list of filters is displayed for the user to choose the one that best fits his/her requirements. Ready for LTE700 (5G) and LTE790 (4G) scenarios.
PASS/FAIL INDICATORS
Easy decision-making
Reduce installation mistakes with the on-screen Pass/Fail indicators, a graphical tool that helps and speeds up the interpretation of measurement results. Different thresholds are available depending on the network area to be analyzed: headend, multi-band amplifiers, bridging connection, connection records, user home, etc. Besides the pre-set values, you will be able to customize your own threshold values.
100% AUTOMATIC
Automatic detection of all the input signal’s parameters
Connect the input signal to your MOSAIQ6 and within a few seconds the meter will automatically capture the signal. The device first searches for the standard and then for all the standard’s parameters. Showing the standard associated to the signal and the signal’s parameters to the meter is no longer required. With MOSAIQ6 it is all as easy as connecting the RF cable; the meter automatically detects the standard (DVB-T/T2, DVB-C, QAM-B, ISDB-T for the terrestrial band, and DVB-S/S2/S2X for the satellite band, IPTV, etc. ) and all the parameters associated to that specific standard.
SATELLITE IDENTIFICATION
By just connecting the RF cable to your MOSAIQ6 you will find out which satellite your antenna is pointing to. Without the need for previous checks or configurations.
ECHOS
Optimal signal reception
In terms of DVB-T and DVB-T2 signal reception, controlling the absence of any echoes that could jeopardize reception is crucial. MOSAIQ6 displays the echoes of the received signal, allowing the installer to minimize them for optimal signal reception.
USER PROFILES
The easiest way to configure your MOSAIQ6
MOSAIQ 6allows you to save multiple profiles according to the type of installation you will be working with. Therefore, you will not need to select the parameters required each time you need to perform a measurement. You will just need to select the profile you wish to work with and all the parameters will be automatically configured in the meter.
MEASUREMENT STORAGE: MACROLOGS AND DATALOGS
Save all signal details in the 32-GB internal memory
While you are taking measurements or looking for any potential problems, you can save sample signal parameters for further in- depth analysis or just for the record and for use in your reports. Not only the measurements will be saved, but also the screen captures just as they were recorded. Furthermore, you will be able to program a Macrolog, so that you can repeat and save measurements by just specifying the time interval between two consecutive measurements. For convenience, take the information with you without transporting the meter. Simply export the data to an external USB memory.
User manual on display
Solve your doubts in real time
MOSAIQ6 includes the function to check the user manual directly on the meter.
It allows to solve doubts or to follow instructions in real time, without the
need to have the printed version of the document.
*()Requirements:**
SW v1.38 or higher
HW v2019 onwards
*GPS OPTION FOR COVERAGE ANALYSIS ()**
Alocation-based installation inventory
With the GPS option, measurements can be displayed on a map at the very same
spot where they were actually taken, thus facilitating coverage analysis.
Accessing the details is as easy as doubleclicking on each image.
(*) Optional function: Ref. 596201
*Wi-Fi Analyzer 2.4/5 GHz ()**
All the communication interfaces at your disposal
This functionality performs a comprehensive analysis of the entire Wi-Fi band (2.4 and 5 GHz), to find, identify and measure all available Wi-Fi networks. For this, MOSAIQ6 offers 4 different analysis functions:
- Wi-Fi List: shows a list of all detected networks and for each one identifies: SSID, BSSID, channel, frequency, encryption mode and power of the access point.
- Wi-Fi measures: for a specific network, shows the current power value of the access point and a graph of its variation during a selectable time interval.
- Time graph: offers a time graph with the history of power measurements of all detected Wi-Fi networks.
- Channel map: shows a graph with the channel distribution of the detected Wi-Fi networks.
(*) Optional function: Ref. 596202
*ANALOGUE TV ()**
Analogue channel generation
This function allows you to display and measure the analogue TV channels still
used in transmodulator-based TV systems. It allows the measuring of signal
levels between 20 dBuV and 128 dBuV, C/N up to 52 dB, and V/A up to 30 dB.
(*) Optional function: Ref. 596203
DAB/DAB+
(*) Digital radio at your fingertips
This function allows you to demodulate a DAB channel, providing signal quality measurements such as MER and CBER, and comprehensive information about the services delivered: Radio info: (Ensemble, PTY, Service, Mode, Audio-, bit rate audio). It allows power measuring between 20 dBuV and 128 dBuV, C/N and MER for this type of signals.
(*) Optional function: Ref. 596204
4K UHD
Ultra high definition in the palm of your hand
The MOSAIQ6 supports the HVEC H.265 video compression format with a maximum
resolution of 4K – UHD (3840×2160) as well as the HDR colour coding standards.
Technical specifications
MOSAIQ6
General Specifications
Pantalla| 8″ touch screen TFT 1024×468 full color
Weight| 2150 g
Dimensions| 250x210x60mm (HxWxD)
Battery| Li-ion (7,2VDC, 9000mAh)
intercambiable en campo
Autonomy| > 4 hours
Interfaces| ETH, USB, HDMI, Audio Out (Jack), FC/APC optical fiber connector,
GPS antenna connector
Storage| 32 GB
Technical Specifications
Frequency
Range| 5 – 3300 MHz
Accuracy| 1 KHz
Tuning| Frequency or channel
Spectrum analyzer
Span| 100 KHz, 1, 5, 10, 20, 50, 100, 200, 500 MHz, 1,0, 2,0, 3,3 GHz and
other (any value between
100 KHz and 3,3 GHz)
RBW| 500 Hz, 1, 3, 5, 10, 30, 50, 100, 300, 500 KHz, 1, 3, 5 MHz
Marks| Up to 4, with delta feature
Event trigger| OK
Waterfall| OK
Hold feature| Maximum and minimum
Reference level| Automatic and manual
DVB-T Digital measurements
Modulations| COFDM (QPSK, 16QAM, 64QAM)
Power| From 20 to 128 dBµV
CBER| 9.9E-2 – 1.0E-6
VBER| 1.0E-3 – 1.0E-8
MER| Up to 40dB
C/N| Up to 52dB
Echoes| OK
MER by carrier| OK
Constellation| OK
Error packets| OK
TILT| OK
---|---
Attenuation| OK
DVB-T2 Digital measurements
Modulations| COFDM (QPSK, 16QAM, 64QAM and 256QAM)
Power| From 20 to 128 dBµV
LDPCBER| 9.9E-2 – 1.0E-6
BCHBER| 1.0E-3 – 1.0E-8
Link Margin| Up to 40dB
MER| Up to 40dB
C/N| Up to 52dB
Echoes| OK
MER per carrier| OK
Constellation| OK
Error packets| OK
TILT| OK
Attenuation| OK
Multiple PLP| OK
QAM Digital Measures (ANNEX A/B/C)
Modulations| 4QAM, 16QAM, 32QAM, 64QAM and 256QAM
Power| From 20 to 128 dBµV
BER| 1.0E-3 – 1.0E-8
MER| Up to 40dB
C/N| Up to 52dB
Constellation| OK
Error packets| OK
TILT| OK
Attenuation| OK
DVB-S Digital Measures
Wideband
(only compatible HW)
|
230 – 2400 MHz
Power| From 20 to 128 dBµV
CBER| 9.9E-2 – 1.0E-6
VBER| 1.0E-4 – 1.0E-8
MER| Up to 20dB
C/N| Up to 30dB
Constellation| OK
---|---
Error packets| OK
TILT| OK
Attenuation| OK
DVB-S2X Digital Measures
Wideband
(only compatible HW)
|
230 – 2400 MHz
Modulations| QPSK, 8PSK, 8APSK, 16APSK and 32APSK
Power| From 20 to 128 dBµV
LDPCBER| 9.9E-2 – 1.0E-6
BCHBER| 9.9E-2 – 1.0E-8
Link Margin| Up to 10dB
MER| Up to 10dB
C/N| Up to 30dB
Constellation| OK
Error packets| OK
TILT| OK
Attenuation| OK
Multi TS| OK
PLS scrambling| OK
DVB-S2 Digital Measures
Wideband
(only compatible HW)
|
230 – 2400 MHz
Modulations| QPSK, 8PSK, 8APSK, 16APSK and 32APSK
Power| From 20 to 128 dBµV
LDPCBER| 9.9E-2 – 1.0E-6
BCHBER| 9.9E-2 – 1.0E-8
Link Margin| Up to 10dB
MER| Up to 20dB
C/N| Up to 30dB
Constellation| OK
Error packets| OK
TILT| OK
Attenuation| OK
Multi TS| OK
FM
Level| OK
C/N| Up to 52dB
RDS| OK
DAB/DAB+ (*Opc. 596204)
Power| From 20 to 128 dBµV
MER| Up to 20dB
C/N| Up to 30dB
BER| 9.9E-2 – 1.0E-6
ANALOGUE TV (Opt. 596203)
Level| From 20 to 128 dBµV
V/A| Up to 52dB
C/N| Up to 30dB
Features
User-customizable widgets on screen| Up to 6
Scan System with measurements and learning plan| OK
LTE Check| OK
F.O.| Refs. 596101/02/05
F.O. Selectivo| Refs. 596111/12/15
GPS Drive Test| Opt. 596201
4K – UHD visualization (HEVC)| OK
MPEG info| SID, VID, AID, Resolution, Profile, Audio Bitrate, Video Bitrate,
Resolution info
IPTV Analyzer| OK
WiFi Analyzer| 2,4GHz and 5GHz (Opt. 596202)
Units| dBµV, dBmV, dBm
Network tools| OK
Pre-amplifiers powering
Pre-amplifiers powering| 5, 13, 18, 24 Vdc and other (any value between 5 and
24V)
Max. supplied power| 12W
Max. supplied current| 900 mA
LNB tone| 22 KHz
DiSEqC| OK
SCR (EN50494) | dCSS (EN50607)| OK
LDPCBER is the BER measurement before LDPC correction.
BCHBER is the BER measurement after LDPC corrector and before BCH correction.
**Refs. 596202/03/04/05 included in Advance model
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>