Televes 579401 PicoKom Power Supply Unit Instruction Manual
- June 1, 2024
- Televes
Table of Contents
Televes 579401 PicoKom Power Supply Unit
Product Information
Specifications
- Model: PicoKom power supply unit
- Input: 12 V, 200 mA
- Outputs: 2
- Weight: 187.00 g (Net), 187.00 g (Gross)
- Dimensions: 90.00 mm (Width), 67.00 mm (Height), 27.00 mm (Depth)
- Main Product Weight: 126.00 g
Product Usage Instructions
Installation
The PicoKom power supply unit is designed to power equipment through the
input coaxial cable while allowing the transmission ofthe TV signal. Follow
these steps for installation:
- Mount the unit on the wall using screws.
- Unscrew the device’s cover to access the connections.
- Insert the previously stripped coaxial cables into the designated slots.
- Close the cover and securely screw it to ensure proper connection.
EasyF Connection System
The PicoKom unit features an EasyF connection system for simplified and
reliable cable connections:
- Unscrew the device’s cover to access the connection.
- Insert the inner conductor of the coaxial cable directly into the device.
- Secure the connection by closing the cover and screwing it in place.
FAQ
-
Q: Can I use the PicoKom power supply unit with only one output?
A: Yes, the unit can be used with either one or both outputs, and the through losses may vary depending on the number of outputs used. -
Q: What is the benefit of the EasyF connection system?
A: The EasyF system improves connection reliability by directly inserting the inner conductor of the coaxial cable into the device without the need for F connectors, reducing the chassis size and securing cable connections with a single screw.
Domestic 12 V-power supply (200 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Furthermore, it is equipped with two outputs.
WHAT’S INCLUDE
- Box 1 pcs.
- Carton 10 pcs.
Physical data
- Net weight 187.00 g
- Gross weight 187.00 g
- Width 90.00 mm
- Height 67.00 mm
- Depth 27.00 mm
- Main product weight 126.00 g
Highlights
- High-performance switched-mode power supply: saves up to 40% power consumption.
- Very low power consumption.
- Pleasing design and ultra-small size: can be installed in 100 mm x 100 mm connection boxes.
- EasyF connection system.
- Fully automated manufacturing, subject to the most stringent quality controls.
Main features
- Can be wall-mounted using screws.
- Through losses may vary depending on whether 1 or 2 outputs are used.
Discover
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the
coaxial cable is directly inserted in the device, thus improving connection
reliability. Thanks to the absence of F connectors, the chassis can be reduced
and the connection of two cables secured with a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
- Unscrew the device’s cover to access the connection
- Insert the previously stripped coaxial cables
- Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried
out using an automated system for contact insertion of the inner conductor,
without any soldering.
- Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed.
- Failure rate reduction: usually produced as a result of cold soldering joints.
- Electromagnetic behaviour optimization: for high frequencies.
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced.
Application example
Technical specifications
