ROUGH COUNTRY 921961020 Front Low Cube Light Mount Instruction Manual
- August 6, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 921961020 Front Low Cube Light Mount
Specifications
- Product Name: CFMOTO Uforce 1000XL Front Low Cube Light Mount
- Model Number: 921961020
- Contents: Driver Side Light Mount, Passenger Side Light Mount, Spacer Plate x2
- Tools Needed: 10mm Socket or Wrench
- Hardware Included: Reuse Factory Hardware
FAQs
- Q: What should I do if I encounter any issues during installation?
- A: If you encounter any issues during installation, please refer to the troubleshooting section in the user manual or contact customer support for assistance.
- Q: Can I use additional mounting hardware for extra security?
- A: It is recommended to only use the hardware provided with the kit to ensure the proper fit and function of the light mount.
PRODUCT INTRODUCTION
- Thank you for choosing Rough Country for all your vehicle needs.
- Please read the instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
- If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque.
- Check to ensure adequate clearance between all components. Periodically check all hardware for tightness.
- KIT CONTENTS:
- Driver Side Light Mount Passenger Side Light Mount Spacer Plate x2
- TOOLS NEEDED:
- 10mm Socket or Wrench
- HARDWARE INCLUDED:
- Reuse Factory Hardware
INSTALLATION INSTRUCTONS
- Remove the two factory 6mm bolts holding the window net latch. Retain hardware for reuse. See Photo 1.
- Lay the net latch on a flat surface. Place the spacer plate on top of the latch. See Photo 2.
- Place the light bracket on top of the spacer plate. See Photo 3.
- Use the factory hardware to reattach the latch with the spacer and mounting bracket to the vehicle. See Photo 4.
- Repeat for the other side of the vehicle.
- Mount lights using hardware supplied with the light kit. Wire lights to preference.
POST INSTALLATION INSTRUCTIONS
- Check all fasteners for proper torque. Check to ensure adequate clearance between all rotating, mobile, fixed, and heated members. Verify clearance between exhaust and brake lines, fuel lines, fuel tank, floorboards, and wiring harness.
- Check electrical wiring to ensure adequate clearance between all rotating, mobile, fixed, and heated members.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she complies with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer’s responsibility to comply with all Federal, State, and Local laws governing the sales of any items listed, illustrated, or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>