DIRT KING DK-811889R DCA Rear Shocks Installation Guide
- August 6, 2024
- DIRT KING
Table of Contents
DIRT KING DK-811889R DCA Rear Shocks
Product Information
Specifications:
- Part# DK-811889R RL – Driver Rear Shock
- Part# DK-811889R RR – Passenger Rear Shock
- Part# DK-811889R-A1201 – Reservoir Mount Kit
Product Usage Instructions
Step 1: Remove Rear Shocks
- Remove lower shock hardware.
- Remove upper shock hardware.
- Remove shock from the vehicle.
Note: Do not discard hardware.
Step 2: Reservoir Mount Install
- Bolt reservoir mount to the frame with the factory bolt. Torque to 35ft lbs.
- On the right side of the vehicle, use the mount as a template to drill a 7/16 hole. Alternatively, if you prefer not to drill a hole, you can secure the mount using a hose clamp. On the left side of the vehicle, the mount will use factory holes.
- Use the provided hardware to finish mounting the bracket to the frame. Torque hardware to 41ft lbs.
Step 3: Install Dirt King Shock
- Install shock into the upper mount, ensure the shock is centered in the mount, and torque hardware to 18 ft-lbs. The reservoir hose on the left side of the vehicle should be routed toward the front of the vehicle. The reservoir hose on the right side of the vehicle should be routed toward the rear of the vehicle.
- Install lower shock hardware and torque to 43 ft-lbs.
Important:
The upper mount must be installed and torqued to spec before installing to the
lower mount.
Step 4: Mount Shock Reservoir
- Install shock reservoir into mount. Close clamps to secure in place.
- Torque socket head bolts to 12 ft-lbs.
Step 5: Inspect your work
- Thoroughly go over your work.
- Repeat steps for the opposite side of the vehicle.
- Reinstall wheels and torque lug nuts to your wheel manufacturer’s specs.
Frequently Asked Questions (FAQ):
Q: What should I do if I find missing items before installation?
A: If you find any missing items, please send an email to
sales@dirtking.com with proof of purchase and a
picture of the parts received for assistance.
Parts Included
- 1 Driver Rear Shock DK-811889R RL
- 1 Passenger Rear Shock DK-811889R RR
- 1 Reservoir Mount Kit DK-811889R-A1201
Please check that all items are present before installation. If for any reason an item or items is missing send an email to sales@dirtking.com with proof of purchase and a picture of the parts received.
Installation Instructions
Before installing, read all instructions. Only certified mechanics should install Dirt King products. Mandatory wheel alignment and ADAS calibration at certified facilities are required after suspension modifications. Failure to do so can lead to handling problems and safety risks. Dirt King is not responsible for damages from improper installation or misuse. Adhere to your vehicle manufacturer’s recommendations. For more information, visit https://dirtking.com/pages/disclaimer.
Step 1: Remove Rear Shocks
- Remove lower shock hardware.
- Remove upper shock hardware.
- Remove shock from the vehicle.
Note: Do not discard hardware.
Step 2: Reservoir Mount Install
- Bolt reservoir mount to the frame with the factory bolt. Torque to 35ft lbs.
- On the right side of the vehicle, use the mount as a template to drill a 7/16″ hole. Alternatively, if you prefer not to drill a hole, you can secure the mount using a hose clamp. On the left side of the vehicle, the mount will use factory holes.
- Use the provided hardware to finish mounting the bracket to the frame. Torque hardware to 41ft lbs.
Left side installed
Right side installed
Step 3: Install Dirt King Shock
- Install shock into the upper mount, ensure the shock is centered in the mount, and torque hardware to 18 ft-lbs. The reservoir hose on the left side of the vehicle should be routed toward the front of the vehicle. The reservoir hose on the right side of the car should be routed toward the vehicle’s rear.
- Install lower shock hardware and torque to 43 ft-lbs.
Important:
The upper mount must be installed and torqued to spec before being installed
on the lower mount.
Step 4: Mount Shock Reservoir
- Install shock reservoir into mount. Close clamps to secure in place.
- Torque socket head bolts to 12 ft-lbs.
Step 5: Inspect your work.
- Thoroughly go over your work.
- Repeat the steps for the opposite side of the vehicle.
- Reinstall wheels and torque lug nuts to your wheel manufacturer’s specs.
For warnings and disclaimers visit https://dirtking.com/pages/disclaimer.
- PHONE: 619-944-8913
- EMAIL: SALES@DIRTKING.COM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>