DIRT KING DK-815889R DCA Rear Shocks Instruction Manual

August 6, 2024
DIRT KING

DIRT KING DK-815889R DCA Rear Shocks

Specifications

  • Part# DK-815889R RL: Driver Rear Shock (Quantity: 1)
  • Part# DK-815889R RR: Passenger Rear Shock (Quantity: 1)
  • Part# DK-815889R-A1201: Reservoir Mount Kit (Quantity: 1)

Product Usage Instructions

Step 1: Remove Rear Shocks

  1. Remove lower shock hardware.
  2. Remove upper shock hardware.
  3. Remove shock from vehicle. Note: Do not discard hardware.

Step 2: Reservoir Mount Install

  •  Attach the reservoir mount to the frame using the center hole on the mount and the existing frame hole near the shock mount.
  •  Use the mount as a guide to mark and drill additional holes into the frame as indicated.
  • c. Secure the reservoir mount to the frame rail with the included hardware and tighten to 20ft lbs.

Step 3: Install Dirt King Shock

  •  Install upper shock into mount and torque hardware to 18ft lbs. Driver side reservoir hose should be routed towards the rear of the vehicle. Passenger side reservoir hose should be routed towards the front of the vehicle.
  •  Install lower shock hardware and torque to 43ft lbs.

Important: Upper mount must be installed and torqued to spec before installing to the lower mount.

Step 4: Mount Shock Reservoir

  •  Install shock reservoir into mount. Close clamps to secure in place.
  •  Torque socket head bolts to 12ft lbs.

Step 5: Inspect your work

  •  Thoroughly go over your work.
  •  Repeat steps for the opposite side of the vehicle.
  • Reinstall wheels and torque lug nuts to your wheel manufacturer’s specs.

FAQ :

Q: What should I do if any parts are missing?
A: If any item or items are missing, please send an email to sales@dirtking.com with proof of purchase and a picture of parts received for further assistance.

Q: Who should install Dirt King products?
A: Only certified mechanics should install Dirt King products to ensure proper installation and safety.

Parts Included

Quantity Item Description Part#
1 Driver Rear Shock DK-815889R RL
1 Passenger Rear Shock DK-815889R RR
1 Reservoir Mount Kit DK-815889R-A1201

Please check that all items are present before installation. If for any reason there is an item or items missing send an email to sales@dirtking.com with proof of purchase and a picture of parts received.
Before installing, read all instructions. Only certified mechanics should install Dirt King products. Mandatory wheel alignment and ADAS calibration at certified facilities are required after suspension modifications. Failure to do so can lead to handling problems and safety risks. Dirt King is not responsible for damages from improper installation or misuse. Adhere to your vehicle manufacturer’s recommendations. For more information, visit https://dirtking.com/pages/disclaimer.

  1. Step 1: Remove Rear Shocks

    • a. Remove lower shock hardware.
    • b. Remove upper shock hardware.
    • c. Remove shock from vehicle.
      Note: Do not discard hardware.
  2. Step 2: Reservoir Mount Install

    • a. Attach the reservoir mount to the frame using the center hole on the mount and the existing frame hole near the shock mount.
    • b. Use the mount as a guide to mark and drill additional holes into the frame as indicated.
    • c. Secure the reservoir mount to the frame rail with the included hardware and tighten to 20ft lbs.
  3. DIRT-KDIRT-KIDIRT-KING-DK-815889R-DCa-Rear-Shocks- \(4\)NG-DK-815889R-DCa-Rear-Shocks- \(4\)ING-DK-815889R-DCa-Rear-Shocks- \(4\) Step 3: Install Dirt King Shock

    • a. Install upper shock into mount and torque hardware to 18ft lbs. Driver side reservoir hose should be routed towards the rear the vehicle. Passenger side reservoir hose should be routed towards the front of the vehicle.
    • b. Install lower shock hardware and torque to 43ft lbs.
      Important: Upper mount must be installed and torqued to spec before installing to the lower mot.
  4. Step 4: Mount Shock Reservoir

    • a. Install shock reservoir into mount. Close clamps to secure in place.
    • b. Torque socket head bolts to 12ft lbs.
  5. Step 5: Inspect your work.

    • a. Thoroughly go over your work.
    • b. Repeat steps for opposite side of vehicle.
    • c. Reinstall wheels and torque lug nuts to your wheel manufacturers specs.

For warnings and disclaimers visit https://dirtking.com/pages/disclaimer

PHONE: 619-944-8913
EMAIL: SALES@DIRTKING.COM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals