BRIZO 695006-NK Kintsu Open Post Tissue Holder Instruction Manual
- August 2, 2024
- BRIZO
Table of Contents
BRIZO 695006-NK Kintsu Open Post Tissue Holder
Product Information
Specifications:
- Model Numbers: 107010, 695007, 695006
- Mounting Options: Drywall, Tile, Solid Walls
- Dimensions: 4 inches (102mm) for model 695006
Product Usage Instructions
Mounting the Tissue Holder:
- Locate a wall stud for mounting, if possible.
- Place the tissue holder in the desired location and ensure the mounting bracket is level.
- Mark the position of the mounting holes on the wall.
- Repeat the above steps for the second mounting bracket.
Attaching the Tissue Bar:
- Remove the tissue bar from the cap by twisting it.
- Securely tighten all mounting screws with a screwdriver while orienting the tissue holder as shown.
- Reinstall the tissue bar and cap assembly by concealing the mounting screws with the button cover.
- Hand-tighten the tissue bar onto the cap.
Optional Tissue Shelf Installation:
- Repeat steps for mounting the tissue holder to securely mount the tissue shelf.
- Securely tighten all mounting screws with a screwdriver while orienting the tissue shelf as desired.
Cleaning and Care:
Care should be given to cleaning this product. To clean, wipe gently with a damp cloth and blot dry with a soft towel. Avoid harsh abrasives or polish that may damage its finish.
FAQ
- Q: Can I install the tissue holder on tile walls?
- A: Yes, the product is suitable for mounting on tile walls. Follow the same installation instructions provided in the manual.
- Q: How do I contact customer support?
- A: You can reach customer support at 1-877-345-BRIZO (2749) orvisit www.brizo.com/customer-support for assistance.
- Q: What is the recommended care procedure for this product?
- A: Clean the product by wiping gently with a damp cloth and blot dry with a soft towel. Avoid using harsh abrasives or polish that may damage the finish.
Tools
You may need
Installation Instruction
- NOTE: If possible, it is best to mount at least one end of your tissue holder into a wall stud. Try to locate a wall stud with a stud finder or by tapping on the wall. Place tissue holder (1) in the desired location. Ensure themounting bracket is level; then, mark the position of the holes (2) on the wall. Repeat for the 2nd mounting bracket as noted above.
- If you were able to locate a wall stud to mount your accessory, drill 1/8″ (3mm) holes and mount the mounting stud with the two screws provided. (Skip to step 4 if both mounting studs were mounted into wall studs.) For drywall – Use a Phillips screwdriver to insert the anchors (1). Push and turn the anchors in a clock-wise direction until flush with the wall surface. Do Not Drill. For tile or solid walls – Drill 1/4″ (6mm) holes then insert anchors (1) and tap flush with wall. Note: Hollow doors may require molly or toggle bolts, which are included with this product.
- Remove tissue bar (1) from cap (2) by twisting. With the tissue holder (3) oriented as shown, Securely tighten all mounting screws (4) with a screwdriver.
- Reinstall tissue bar and cap assembly by push in button cover (1) to conceal mounting screws (2). Hand tighten tissue bar (3) onto cap (4).
- Repeat steps 1 and 2 as shown for tissue holder to securely mount tissue shelf. With the tissue shelf (1) oriented as desired, Securely tighten all mounting screws (2) with a screwdriver.
- Push in button cover (1) to conceal mounting screws.
CLEANING AND CARE
Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>