Brizo 694707-NK 8 Inch Mini Pivoting Towel Bar Instruction Manual
- May 15, 2024
- BRIZO
Table of Contents
Instruction Manual
8″ MINI PIVOTING TOWEL BAR
694707-NK 8 Inch Mini Pivoting Towel Bar
Model
694707
Series
Kintsu™
Specify Finish
You may need
CAUTION
Avoid locating pivoting towel bar where it might indavertently swing into
mirrors or other glass products. To wel bars are heavy and could cause
inadvertent glass breakage.”
NOTE: If possible, it is best to mount your accessory into a wall stud.
Try to locate a wall stud with a stud finder or by tapping on the wall.
Place mounting bracket (1) in the desired location. Ensure the mounting
bracket is level; then, mark the position of the holes (2) on the wall.
If you were able to locate a wall stud to mount your accessory, drill 1/8″
(3mm) holes and mount the mounting bracket with the two screws provided. (Skip
to step 4 if both mounting brackets were mounted into wall studs.)
For drywall – Use a Phillips screwdriver to insert the anchors (1). Push and
turn the anchors in a clock-wise direction until flush with the wall surface.
Do Not Drill.
For tile or solid walls – Drill 1/4″ (6mm) holes then insert anchors (1) and
tap flush with wall.
Note: Hollow doors may require molly or toggle bolts, which are included
with this product.
1-877-345-BRIZO (2749)
www.brizo.com/customer-support
With the mounting bracket (1) oriented as shown, place it over the installed
anchors (2) and attach with screws (3).
Position towel bar (1) over mounting bracket (2) and tighten set screw (3).
Set screw should be on the bottom of body.
CLEANING AND CARE
Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.