AQIRYS AVIOR Desktop PC Installation Guide
- August 3, 2024
- AQIRYS
Table of Contents
AQIRYS AVIOR Desktop PC
INSTALLATION GUIDE
- A : Remove the side panels and front panel.
- B : Install the power supply (PSU).
- C : Install the motherboard (MB).
- D : Install the fans.
- E : Install the hard-disk drive (HOD).
- F : Install the solid-state drive (SSD).
- G : Install the graphics card (VGA).
Included accessories
Please make sure that the PSU ventilation slots and threaded holes are positioned correctly in relation to the chassis.
Please remove the side panels before removing the front panel.
To remove the front panel, pull on the bottom edge.
Align the MB holes with the spacers and secure using the No.3 screws. If one of the spacers is missing, install a new No.2 spacer.
Supported fans (maximum)
- Front: 3 x 120mm or 3 x 140mm
- Back: 1 x 120mm
- Top: 2 x 120mm or 2 x 140mm
For superior performance, the case allows the use of a liquid cooling system, being compatible with the following radiator sizes:
- Front: 120 / 140 / 240 / 280 / 360mm
- Top: 120 / 140 / 240 / 280 / 360mm
- Rear: 120mm
Install the HDD in its holder using the No. 3 screws. Secure the holder inside the case, as shown in the image.
Install and secure the SSD using four screws as shown in the picture.
Remove the PCI slot protection cover. Install the graphics card and secure it with a screw.
1/0 PANEL
PIN diagram for 1/0 panel cable
ARGB Controller
Direct Connection to the Motherboard : Connect the fans in series and then you can connect them directly to a compatible motherboard with a 3-pin 5V ARGB connector for a harmonious and personalized lighting control.
Connection through the Included ARGB Controller: If you want to control the ARGB backlighting using the controller supplied with the case, the steps are the same as for controlling it using the motherboard, except that at the end, the connector that connects to the motherboard now connects to the additional controller supplied with the case.
- M : Change the lighting modes
- S: Adjust the brightness of the lighting
- C: Lighting mode in a single color
SUPPORT
If you encounter errors or any other problems with the product don’t
hesitate to contact us.
© AQIRYS®. All rights reserved. AQIRYS® name and logo and all other related products, service names, and design marks are trademarks or registered trademarks of PC-coolers SRL. All other brand names and trademarks are the property of their respective owners. Specifications and design are subject to change without notice due to product improvements.
REGULATORY
- Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
- This product is safe and complies to EU requirements. (compliant with directive EMC (2014/30/EU))
- This product is manufactured conforming with the European RoHS standard. (compliant with directive RoHS 2.0 (2015/863/EU))
- Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>