Arcturus Pro PC Case Aqirys Mid ARGB Installation Guide
- June 15, 2024
- AQIRYS
Table of Contents
ARCTURUS PRO
INSTALLATION GUIDE
Arcturus Pro PC Case Aqirys Mid ARGB
A: Remove the side panels and front panel.
B: Install the power supply (PSU).
C: Install the motherboard (MB).
D: Install the fans.
E: Install the hard-disk drive (HDD).
F: Install the solid-state drive (SSD).
G: Install the graphics card (VGA).
- Please remove the screws before removing the side panels.
- Please remove the side panels before removing the front panel.
- Attention: the tempered glass panel is provided with hinges! Handle with care!
Accessory beg
- Please make sure that the PSU ventilation slots and threaded holes are positioned correctly in relation to the chassis.
Align the MB holes with the copper spacers and secure using the No.3 screws.
If one of the spacers is missing, add a new spacer (No.2).
Supported fans (maximum)
Front: 3 x 120mm or 3 x 140mm
Back: 1 x 120mm
Top: 3 x 120mm or 2 x 140mm
Side: 3 x 120mm
For superior performance, the chassis allows the use of a liquid cooling
system, offering the possibility of installing a 120/140/240/280/360/420 mm
radiator.
-
Install the HDD in its holder using the No. 3 screws. Slide-in to lock the holder in its cage, as shown in the picture.
-
Install and secure the SSD using four screws as shown in the picture.
- Remove the PCI slot protection cover.
Install the graphics card and secure it with a screw.
I/O PANEL
PIN diagram for I/O panel cable
SUPPORT
If you encounter errors or any other problems with the product don’t hesitate to contact us.
| |
---|---|---
https://www.aqirys.com/product/arcturus-pro
|
https://www.instagram.com/aqirys/
© AQIRYS®. All rights reserved. AQIRYS® name and logo and all other related
products, service names, and design marks are trademarks or registered
trademarks of PC-coolers SRL.
All other brand names and trademarks are the property of their respective
owners.
Specifications and design are subject to change without notice due to product
improvements.
