AQIRYS IM10 T.G.A. Wired Mouse User Guide

AQIRYS IM10 T.G.A. Wired Mouse

Product Information

The T.G.A. Wired Gaming Mouse is designed for gamers who want a customizable and comfortable gaming experience. The mouse features a magnetic palm rest that can be easily detached and replaced, a weight and balance system that allows users to adjust the weight and balance of the mouse, and customizable main buttons’ cover thatcan be easily removed and replaced. The mouse also has a high-precision optical sensor, six programmable buttons, and adjustable DPI settings.

Product Usage Instructions

1. Connect the T.G.A. Wired Gaming Mouse to an available USB port on your computer.
2. Download and install the software driver from www.aqirys.com/product/t-g-a-wired.
3. Use the software to customize your mouse settings.
4. To adjust the weight and balance of the mouse, remove the palm rest, raise the weight cartridge by its extended edge, and slide back to remove it. Adjust the weight and balance of the mouse by adding or removing the small modules as per your preference. After configuring the weight cartridge, slide it back into the mouse body until it clicks and locks into place.
5. To customize the main buttons’ cover, remove the palm rest, gently but firmly push the locking pin, and pull the lower edge of the buttons cover. Replace with your preferred cover.
6. To reset the mouse to factory settings, press and hold Side Button 1 + Side Button 2 + Wheel Button for three seconds (the scroll wheel LED will blink red three times).

With these instructions, you can make full use of the T.G.A. Wired Gaming Mouse and tailor it to your gaming needs.

Installation

1. Connect the mouse to an available USB port on your computer.
2. Download the software driver (available here: www.aqirys.com/pro-duct/t-g-a-wired) > Unpack and install > Use the software to customize your mouse settings.
   Factory reset:
   Keep pressed the Side Button 1 + Side Button 2 + Wheel Button for three seconds to reset the mouse to factory settings (the scroll wheel LED will blink red three times).

Presentation mouse

1. Left Button
2. Right Button
3. Scroll Wheel
4. DPI Button
5. Side Button 1
6. Side Button 2
7. Polling rate

Palm support

The magnetic palm rest can be easily detached and replaced by gently pulling its lower edge.

Main button cover

The main buttons’ cover can be easily detached and replaced or customized. Remove the palm rest. Gently but firmly push the locking pin, and pull the lower edge of the buttons cover.

Weight and Balance

Remove the palm rest. Raise the weight cartridge by its extended edge and slide back to remove it. Adjust the weight and balance of the mouse according to your preferences;
each of the 12 small modules weighs ~1.35 grams. You can fine-tune the mouse balance by adding more or less weight to the front, back or sides. After configuring the weight
cartridge, slide it back into the mouse body until it clicks and locks into place.

Left/Right click feedback

Your mouse comes with a set of spacers of different thicknesses that can be used to customize the Left and Right buttons feedback. Thickness is indicated by a number on the spacer. We recommend the higher thickness for crisp and tactile click feedback and the lower thickness for light and soft click feedback.

• Detach the main buttons cover, flip it and gently remove the installed spacers using a sharp thin tool. Peel and stick the new spacers into place.

Replacing the skates

SUPPORT

• If you encounter errors or any other problems with the mouse don’t hesitate to contact us.

support@aqirys.com

© AQIRYS®. All rights reserved. AQIRYS® name and logo and all other related products, service names, and design marks are trademarks or registered trademarks of PC-coolers SRL. All other brand names and trademarks are the property of their respective owners. Specifications and design are subject to change without notice due to product improvements.

REGULATIONS

• Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
• This product is safe and complies to EU requirements. (compliant with directive EMC (2014/30/EU))
• This product is manufactured conforming with the European RoHS standard. (compliant with directive RoHS 2.0 (2015/863/EU))
• Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.

Noi, S.C. PC-coolers S.R.L. cu sediul social in Bucuresti, strada Matei Basarab, nr. 98, bloc 86, scara 2, etaj 3, apartament 40, sector 3, cu certificat de inregistrare seria J40/1005/2005 prin reprezentant legal Director General Bogdan Bistreanu, asiguram, garantam si declaram pe propria raspundere, conform prevederilor din: HG 487/2016 (privind compatibilitatea electromagnetica), HG 409/2016 (privind stabilirea conditiilor pentru punerea la dispozitie pe piata a echipamentelor electrice de joasa tensiune), OUG 5/2015 (privind deseurile de echipamente electrice si electronice) si HG 322/2013 (privind restrictiile de utilizare a anumitor substante periculoase in echipamentele electrice si electronice) , ca produsul:

• Tip produs: Mouse PC
• Brand: AQIRYS
• Denumire marketing: T.G.A. Wired
• Numar model: IM10

la care se refera aceasta declaratie, nu pune in pericol viata, sanatatea, securitatea muncii, nu produce un impact negativ asupra mediului, nu pune in pericol securitatea oamenilor, animalelor dom estice si bunurilor mobile si imobile si este in conformitate cu urmatoarele reglementari si Directive Europene:

RoHS 2.0 (2015/863/EU), EMC (2014/30/EU)si urmatoarele Standarde Europene:

• EN 55032:2015
• EN 55035:2017
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• Potrivit dispozitiilor HG 487/2016 si ale HG 409/2016, produsul este marcat “CE”.

Prezenta declaratie fost completata conform documentelor emise de catre Producator.

Importator si Distribuitor in Romania: SC PC-coolers SRL Adresa: Calea Vitan 154-158, sector 3, Bucuresti, Romania
031.433.7200 | ✉ office@pc-coolers.ro | www.pc-coolers.ro

References

• coolers.ro
• T.G.A. Wired - AQIRYS
• PC-coolers – Noi iti sustinem pasiunea pentru gaming!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>