AQIRYS T.G.A. Mouse Gaming Wireless User Guide
- June 10, 2024
- AQIRYS
Table of Contents
- AQIRYS T.G.A. Mouse Gaming Wireless
- Product Information
- Product Usage Instructions
- Customization
- Wireless pairing
- Battery level indicator
- LED System
- Wireless mode
- Setup
- Mouse overview
- Main buttons’ cover
- Left/Right click softness
- Button and side grips
- Skates replacement
- SUPPORT
- REGULATORY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AQIRYS T.G.A. Mouse Gaming Wireless
Product Information
The T.G.A. is a wireless mouse that comes with a magnetic palm rest. It has an LED battery level indicator and can be used in both wired and wireless modes. The mouse automatically switches between modes and can be paired with the receiver if the wireless connection becomes unstable. The battery can be charged using a USB cable, and to conserve battery life, it is recommended to switch to wireless mode as soon as the charging is complete. The mouse comes with an extension adapter for the receiver, and drivers can be downloaded from the AQIRYS website for detailed configuration.
Product Usage Instructions
- To detach the magnetic palm rest, gently pull its lower edge.
- The mouse can be used in both wired and wireless modes. The switch between modes happens automatically.
- If the wireless connection becomes unstable, the mouse and receiver can be re-paired by pressing and holding the Left Button + Wheel Button + Right Button until the scroll wheel LED blinks yellow. Then place the mouse near the receiver, unplug it, and replug the receiver to the USB port. Once the pairing is complete, the scroll wheel LED will stop blinking.
- To charge the battery, connect the mouse to a computer using the USB cable. When the battery level is low, the scroll wheel LED will blink red. Once fully charged, the LED will turn solid green.
- To conserve battery life, it is recommended to switch to wireless mode as soon as the charging is complete.
- The mouse comes with an extension adapter for the receiver. Connect the receiver to a computer’s USB interface (directly or using the extension adapter and USB cable). Slide the power switch to the ON position (8 or 9). The mouse and receiver will connect automatically.
- Download the driver from the AQIRYS website, extract and install it, and use the installed software for a detailed configuration of the mouse.
Customization
Palm rest
The magnetic palm rest can be easily detached and replaced by gently
pulling its lower edge.
Wireless pairing
The switch between the wireless and wired modes is made automatically. If the wireless connection becomes unstable, the mouse and the receiver can be repaired.
- Keep pressing the Left Button + Wheel Button + Right Button until the scroll wheel LED blinks yellow.
- Release the buttons and place the mouse near the receiver. Unplug and then replug the receiver to the USB port. Once the pairing is complete, the scroll wheel LED will stop blinking.
Battery level indicator
When the battery level is low (10%), the scroll wheel LED will blink red. Connect the mouse to the PC using the USB cable to start charging the battery (the LED will blink orange). Once the battery is fully charged, the LED will turn solid green.
Note!
To preserve the battery life as much as possible, we recommend unplugging the
USB cable and switching to wireless mode as soon as the charging is complete.
LED System
- For the LED system to properly activate, if sliding the power switch from position B to position C, please stop and wait for 3-5 seconds in position A.
- For the LED system to be active in wired mode, the power switch must be set to position C while the mouse is in wireless mode!
- The scroll wheel LED color indicates the DPI level; the DPI LED can be customized or turned off for prolonged battery life via AQIRYS software.
Wireless mode
- Connect the wireless receiver to an available USB port on your computer (directly or using the included extension adapter and the USB cable).
- Slide the Power switch to the ON position (8 or 9). The mouse and receiver will automatically connect.
- Download the software driver (available here: www.aqirys.com/product/t-g-a) > Unpack and install > Use the software to customize your mouse settings.
Setup
Wired mode
- Connect the mouse to an available USB port on your computer.
- Download the software driver (available here: www.aqirys.com/product/t-g-a) > Unpack and install > Use the software to customize your mouse settings.
Mouse overview
- Left Button
- Right Button
- Scroll Wheel
- DPI Button
- Side Button 1
- Side Button 2
- Power ON/OFF/LED
Main buttons’ cover
The main buttons’ cover can be easily detached and replaced or customized. Remove the palm rest. Gently but firmly push the locking pin, and pull the lower edge of the button cover.
Left/Right click softness
Your mouse comes with a set of spacers of different thicknesses that can be used to customize the Left and Right buttons’ feedback. Thickness is indicated by a number on the spacer. We recommend the higher thickness for crisp and tactile click feedback and the lower thickness for light and soft click feedback.
Detach the main buttons cover, flip it and gently remove the installed spacers using a sharp thin tool. Peel and stick the new spacers into place.
Button and side grips
Skates replacement
SUPPORT
If you encounter errors or any other problems with the mouse don’t hesitate to contact us.
© AQIRYS®. All rights reserved. AQIRYS® name and logo and all other related products, service names, and design marks are trademarks or registered trademarks of PC-coolers SRL. All other brand names and trademarks are the property of their respective owners. Specifications and design are subject to change without notice due to product improvements.
REGULATORY
- Unauthorized repairs or disassembly of the product will void the warranty and may cause damage.
- This product is safe and complies with EU requirements. (compliant with directive EMC (2014/30/EU))
- This product is manufactured conforming to the European RoHS standard. (compliant with directive RoHS 2.0 (2015/863/EU))
- Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people’s health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or local authority.
We, S.C. PC-coolers S.R.L. with registered office in Bucharest, Matei Basarab street, no. 98, block 86, staircase 2, floor 3, apartment 40, sector 3, with registration certificate series J40/1005/2005 through legal representative Director General Bogdan Bistreanu, we ensure, guarantee, and declare our responsibility, according to the provisions of HG 487/2016 (regarding compatibility electromagnetics), HG 409/2016 (regarding the establishment of the conditions for making equipment available on the market low-voltage electrical), GEO 5/2015 (regarding electrical and electronic equipment waste), and HG 322/2013 (regarding the restrictions on the use of certain hazardous substances in electrical and electronic equipment), as the product:
Tip produs | Brand | Denumire marketing | Numar model |
---|---|---|---|
Mouse PC | AQIRYS | T.G.A. | IM10DM |
to which this statement refers, does not endanger life, health, or work safety, does not produce a negative impact on the environment, does not endanger the safety of people, domestic animals, and movable and immovable property, and is in in accordance with the following regulations and European Directives:
RoHS 2.0 (2015/863/EU), EMC (2014/30/EU), R.E.D (2014/ 53/EU), LVD (2014/35/EU)
and the following European Standards:
- EN 55032:2015
- EN 55035:2017
- EN 61000-3-2:2014
- EN 61000-3-3:2013
Frequency and power bands (mouse and transceiver)
- The frequency band(s) in which the radio equipment operates:
- WIFI: 2.400 – 2.4835 GHz
- The maximum radio frequency power transmitted in the frequency band(s) in which the equipment operates the radio:
- EIRP/GFSK: 4.53 dBm (mouse)
- EIRP/GFSK: 4.34 dBm (transceiver)
According to the provisions of HG 487/2016 and HG 409/2016, the product is marked “CE”.
This declaration has been completed according to the documents issued by the
Manufacturer.
Distribuitor in Romania: SC PC-coolers SRL
Adresa: Calea Vitan 154-158, sector 3, Bucures, Romania
☏ 031.433.7200 | ✉ office@pc-coolers.ro | www
.pc-coolers.ro.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>