AQIRYS ALYA Headphone

THANK YOU

• Thank you for choosing ALYA to be your all-purpose gaming headset!
• Please, follow the instructions from the enclosed user manual to successfully complete the installation of your new gear.

• BIG #BOLD #AMPLIFIED

• Welcome to the sound of AQIRYS®!

Headset Specifications

Wireless Receiver Specifications

Packing List

Overview

1. On/Off button
2. LED indicator
3. 3.5 mm Audio Port
4. Type-C Charging Port
5. Volume wheel
6. Microphone On/Off switch
7. Detachable Microphone Port
8. Static RGB Lighting System
9. Elastic headband
10. Detachable microphone
11. Wireless receiver

Headset Connection

Bluetooth

1. Long press the button , the headset will turn on, and the LED will light up blue.
2. Press three time the button , and the headset will switch to the Bluetooth connection entering Pairing mode (the LED will flash blue and red).
3. Turn on the Bluetooth connection on your equipment, search for the”AQIRYS Alya Wireless Headset” device and choose to connect to it.
4. If the pairing is completed successfully, the headset LED will flash blue.
   Note: the RGB lighting system will turn on automatically when the headset is turned on; the lighting can be switched off later via the button on the headset.

Wireless 2.4 GHz

1. Connect the USB receiver to an available port on your device. The required driver will be installed automatically, and the device will be displayed with the name “AQIRYS Alya Wireless Headset.” The receiver will enter Standby mode, and the LED will flash blue.
2. Turn on the headset and wait for it to enter Pairing mode.
3. The headset and the receiver will connect automatically, and the receiver LED will be lit solid blue.

Subsequent Connections
After the first use, the pairing information will remain saved on your equipment, and the subsequent connections between the receiver and the headset will be made automatically.

Wireless Receiver Power On/Off
The receiver is automatically turned on and off when connected and disconnected to the USB port.

Wired
When the headset is connected using the audio cable, the wireless functionality is turned off automatically.
Note: wireless functionality can only be activated after disconnecting the audio cable!

LED Indicator State

Headset

Receiver

Auto Disconnect and Reconnect

The headset automatically disconnects when it is out of the effective operating distance. The headset will automatically reconnect to the device if returned to range within less than 5 minutes. Otherwise, after 5 minutes, the headset will automatically turn off.

Basic Key Operation

• Turn Headset On
  Long press the button , the headset will turn on, and the LED will light up blue.

• Turn Headset Off
  Long press the button , the blue LED will turn off, and the headset will turn off.

• Volume Adiustment
  Volume can be adjusted via the wheel on the left earcup.

• Play/Pause

  • Pause: short press the button while playing a song.
  • Play: short press the button! to resume playing the song.

RGB Illumination

The RGB lighting system will turn on automatically when the headset is turned on. If you want to turn off the lighting to conserve battery power, or for any other reason, double press the button. The lighting can be turned on again by following the same procedure.
Note: The lighting will not work while the headset is charging or used with the audio cable.

Battery Charging

When the battery level is low, the headset can be charged in about 3 hours using the USB charging cable. If the headset is turned on and connected wirelessly (Bluetooth or USB wireless), it will turn off and restart automatically when the USB cable is connected, remaining functional throughout the charging process. During charging, the LED indicator will illuminate pink (if the headset is active) or red (if the headset is off); the LED indicator will turn off when charging is complete.

Battery Level

When the headset is connected to an IOS or Android device, the battery level will be displayed in the upper right corner of the screen.

Headset Customization

Elastic headband

1. Pull gently on the rubber grip of the elastic band until it detaches from its holder.
2. Change the position of the elastic band for a more comfortable fit.

Kitty Ears
The kitty ears can be attached to the upper band of the headset. Follow the L- left and R- right markings inside the rubber ears for correct positioning.

Recommendation

1. You can use 5V / 1A or 5V / 2A chargers to charge the battery; higher voltages can damage the headset.
2. If more than 3 months have passed since the last use of the headset, please charge the battery before use.
3. If you do not use the headset for an extended time, we recommend running a complete charge cycle of the battery every 3 months to preserve it.
4. Before the first use, we recommend running a complete battery charge cycle.

WARNING

1. Keep the headset in environments without extreme temperatures; do not expose to direct sunlight.
2. Keep the headset away from fire and hot objects.
3. Keep the headset dry; avoid exposure to humid environments; do not immerse in liquid.
4. Do not try charging methods other than using the supplied USB cable.
5. Do not disassemble, repair or modify the headset.
6. In case of physical damage like bending, deformation, corrosion, contact the authorized service.
7. In case of other issues such as abnormal odor, very high operating temperature, abnormal changes in color or shape, stop using the headphones immediately and contact the authorized service.
8. If the battery is replaced incorrectly, there is a risk of explosion. The battery can only be replaced with the same type or equivalent. Please contact the authorized service.
9. This product is not a toy. Children under the age of 14 may use the product under parental supervision.
   WARNING: Permanent hearing damage can occur if the headset is used at high volumes for extended periods of time.

REGULATORY

• Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.

• This product is safe and complies to EU requirements. (compliant with directive EMC (2014/30/EU))

• This product is manufactured conforming with the European RoHS standard. | compliant with directive RoHS 2.0 (2015/863/EU])

• Using the WEEE symbol (the crossed-out bin) indicates that the electrical and electronic equipment inside the package can be recycled. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. For detailed information about recycling, please contact your retailer or a local authority.

• The batteries must not be disposed of with your other household waste; treat them in compliance with the local regulations or contact your local city office, your household waste disposal service, or the shop where you purchased the product.
  Frequency bands and Powers (Headset and Transceiver)

  • Frequency band(s) in which the radio equipment operates:
    WIFI: 2402 – 2480 MHz

  • Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
    GFSK, PI/4 DQPSK, 8DPSK: 10 dBm

CUSTOMER SUPPORT

If you encounter errors or any other problems with the product don’t hesitate to contact us.

WARNING: Permanent hearing damage can occur if the headset is used at high volumes for extended periods of time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>