ITIAN TECHNOLOGY S23 Ice Cooling Car Charger User Guide
- July 31, 2024
- ITIAN TECHNOLOGY
Table of Contents
Ice Cooling Car Charger
User Guide
Thank you for purchasing and using this product!
Please read this operation instruction carefully before using this product,
Product Specification
Input: 5V 3A/ 9V 3A/ 12V 2.5A
Ouput: 15W (Max)
Applicable Devices
Compatible with MagSafe iPhone.
The LED light turns red during wireless charging toindicate a charging
failure.
‘The following situation can cause falures, ke charging slowly, stop charging, over-temperature for charging position
- The adapter is not runup to standard
- The charging cable is not up o standard.
- The phone case is t0o thick (within 2mm thickness phone case recommended )
- The builtin wireless charging receiver positon is not coincided with wireless charger coil position.
- There is metalimagnet on the back of cell phone or phone case.
- Smariphone does not support wireless charging function.
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected to power supply.
- Operating temperature: ~20-45T.
Step to install air vent
-
Follow the arrows to install 3 parts.
-
Adjust the screw cap to the best active status.
-
Turn the pulley to the left to adjust the hook to the longest.
-
Rotate the pulley to the right to make the hooks to clamp the air vent blades.
LED control switch
Switch
Gan tum of lights and change other light colors
LED indicator light :
Ice blue always on: normal charging Red flashing: abnormal charging
Case Usage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>