Rayrun BR01-11 LED Remote Controller User Manual
- June 3, 2024
- RayRun
Table of Contents
Rayrun BR01-11 LED Remote Controller
Model: BR01-11 / BR01-20 / BR01-30 / BR01-40
Operation
Pair the remote to receiver
The remote controller needs to be paired to receiver to work. User can pair up
to 5 remote controllers to one receiver and each single remote controller can
be paired to any receiver.
To pair a new remote to the receiver, please operate with following two steps:
- Cut off the power of receiver and power on again after more than 5 seconds.
- Hold press the two keys noted with pair function simultaneously and briefly within 10 seconds after receiver powered on.
After this operation, the remote is paired to the receiver and ready to work.
Unpair the remote controller
To unpair the remote from the receiver, please operate with following two steps:
- Cut off the power of receiver and power on again after more than 5 seconds.
- Hold press the two keys noted with unpair function simultaneously within 10 seconds after receiver powered on.
After this operation, the remote will be unpaired from receiver.
Model matching
Each model remote controller is designed to work with matched receivers only.
The remote will work improperly if been paired to mismatched receivers.
Each model needs to be matched with different function receivers as below:
BR01-11 ——— Single color.
BR01-20 ——— Tunable white (CCT).
BR01-30 ——— RGB color.
BR01-40 ——— RGB+White or RGB+CCT.
Specification
Working voltage : DC 3V, CR2032 battery
Wireless protocol: Umi protocol based on SIG BLE Mesh
Frequency band: 2.4GHz ISM band
Wireless power: < 7dBm
Working temperature: -20-55 C(-4-131 F)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>