beyerdynamic 1075100 MMX 100 Gaming Over Ear Headset User Manual

beyerdynamic 1075100 MMX 100 Gaming Over Ear Headset User Manual

Congratulations to your Meta Pick! We hope you will enjoy your MMX 100 headset from beyerdynamic.

Please take some time to read carefully through this manual before using the product.

ENJOY THE SOUND!

Your beyerdynamic Team

SAFETY INSTRUCTIONS

Risk of injury

• We would like to point out that excessively high volumes and long listening times may cause hearing damage. Hearing defects always constitute an irreversible impairment of hearing ability. If you suffer from tinnitus, do not use headphones or reduce the volume.
• When connecting the headset, please ensure that the volume is turned down to minimum. Adjust the volume after putting on the headset.

Danger to life

• Headphones drastically reduce perception of external sounds. Using headphones in road traffic can be potentially dangerous. The user’s hearing must not be impaired to the extent that it causes road safety risks. Please also make sure that you do not use the headphones in traffic, especially within an area of potentially dangerous machines and tools.
• Furthermore, avoid using headphones in situations where hearing must not be affected, especially when crossing a railway crossing or at a construction site.

Liability / intended use

• Do not use the product for any application which is not described in this product information.
• beyerdynamic is not liable for improper use of the product and its accessories.

SERVICE

• If you require service, please contact qualified service personnel or directly: beyerdynamic Service- und Logistik Center
  E-mail: service@beyerdynamic.de

• Dismantling the headset yourself will invalidate the guarantee.

SUPPLIED ACCESSORIES

• 1 x 5-pole jack to 4-pole jack cable, 1.2 m (3.9 ft), to connect the headset to mobile devices
• 1 x 5-pole jack to 2 x 3-pole jack cable, 2 m (6.5 ft), to connect the headset to a computer or console
• 1 x Microphone pop shield

ACCESSORIES / REPLACEMENT PARTS

• Accessories and replacement equipment can be found at: www.beyerdynamic.com
• If you have technical questions while using the headset or need further guidance, please visit our FAQ website at:  support.beyerdynamic.com

MAINTENANCE

• Use a soft cloth moistened with water to clean the surface.
• Make sure that no water enters the headset.
• Do not use cleaning agents containing solvents.
• Never use a vacuum cleaner for cleaning the headset, as this may cause irreparable damage.

DISPOSAL

• At the end of its operating life this product may not be disposed of along with normal household waste. Please take it to a designated recycling point for electric and electronic appliances.
• This is indicated by the symbol on the product, the operating instructions or the packaging

CONNECT THE MICROPHONE TO THE HEADSET

CONNECT THE CABLE TO THE HEADSET

CONNECTING CABLE WITH 4-POLE JACK

• Connect the flat 5-pole jack to the headset and the round 4-pole jack to your device such as console controllers, external soundcards, notebooks, tablets etc.
• For devices with 1/4″ jack (6.35 mm), please use a thirdparty adapter. Make sure that it is a 4-pole adapter, as the microphone will not work with a 3-pole 1/4″ (6.35 mm) TRS adapter.
• Caution: Connect the round 4-pole jack connector of the cable to a headphone socket only!
  If you connect the headset to any other jack socket, the headset could be damaged.

CONNECTING CABLE WITH TWO 3-POLE JACKS

• Connect the flat 5-pole jack to the headset and the two round 3-pole jack connectors to a headphone output and microphone input of a PC or notebook, which have a mini combination jack (3.5 mm).
• For devices with 1/4″ jack (6.35 mm), please use one of ours or a third-party adapter.
• Caution: Connect the round 3-pole jack connectors of the cable to a headphone and microphone socket only!
  If you connect the headset to any other jack sockets, the headset could be damaged.
  

MUTE AND UN-MUTE THE MICROPHONE

• Press the button to mute or unmute the microphone.
• When muted the button sticks outward.
• When unmuted the button is inward.
  

REPLACING THE EAR PADS

• To remove the ear pad, gently turn it counter-clockwise and pull it off.
  

• To attach the ear pad, place it onto the orange housing and gently turn it clockwise until it sits tight.
  

CHANGING THE VOLUME

• The headphone volume can easily be increased by turning the control wheel up.
• To decrease the volume, turn the control wheel down.
  

TECHNICAL SPECIFICATIONS

Headphone

Transducer type .. . . . . . Dynamic
Operating principle. . . . . . Closed
Sound coupling to the ear.. . . . . . Circumaural
Frequency response. . . . . . 5 – 30,000 Hz
Impedance . . . . . . . 32 Ω
Max. sound pressure level
@1 mW / 500 Hz . . . . . . 116 dB SPL
T.H.D. . . . . . . < 0.5%
Headband pressure . . . . . . 4.5 N
Connection . . . . . . 5-pole mini jack plug (3.5 mm)
Weight (headphone) . . . . . . 296 g (10.44 oz)

Microphone
Transducer type . . . . . .Electret condenser
Capsule diameter. . . . . . .9.9 mm (0.39″)
Polar pattern. . . . . . .Cardioid
Frequency response . . . . . .5 – 18,000 Hz
Max. sound pressure level . . . . . .118 dB
Signal-to-noise ratio. . . . . . . 67 dB

SYMBOLS

www.beyerdynamic.com
beyerdynamic GmbH & Co. KG
74072 Heilbronn / Germany
Phone +49 7131 617-300 •
E-Mail info@beyerdynamic.de
www.beyerdynamic.com  .

For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Subject to change without notice.

EN-DE-FR-ES-IT-SV-RU-KO-JA-ZH 1 / MMX 100 / (11.21)

Documents / Resources

| beyerdynamic 1075100 MMX 100 Gaming Over Ear Headset [pdf] User Manual
1075100 MMX 100 Gaming Over Ear Headset, 1075100, MMX 100 Gaming Over Ear Headset, Gaming Over Ear Headset, Over Ear Headset, Ear Headset, Headset
---|---

References

• Headphones & Microphones |beyerdynamic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>