ATEN VE811 HDMI HDBase Extender User Guide
- June 16, 2024
- Aten
Table of Contents
ATEN VE811 HDMI HDBase Extender User Guide
Hardware Review
Hardware Installation
VE811 HDMI HDBaseT Extender
Hardware Review
VE811T Front and Rear View
- Power jack
- HDBaseT output port
- Link LED
- Power LED
- Long Reach Switch
- F/W upgrade port
- HDMI input port
VE811R Front and Rear View
- Power Jack
- HDBaseT input port
- HDMI out LED
- Link LED
- Power LED
- Long Reach Switch
- F/W upgrade port
- HDMI output port
Hardware Installation
- Connect the HDMI Input Port on the VE811T to the HDMI Output Port on your video source device using HDMI cable.
- Connect one end of the RJ-45 cable to the HDBaseT output port on the transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT input port on the receiver.
- Connect the HDMI Output Port on the VE811R to the HDMI Input Port on your video display device using HDMI Cable.
- Plug the power adapter cable into the power jack on the VE811.
Working in Long Reach Mode
The VE811 supports long reach mode. When this mode is applied, the maximum range can be enhanced to 150 meters at resolutions up to 1080p
Extensor de HDMI HDBaseT VE811
Resumen de hardware
Vista frontal y posterior del
VE811T
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>