Rayrun BR03-11 LED Remote Controller User Manual
- June 3, 2024
- RayRun
Table of Contents
Rayrun BR03-11 LED Remote Controller
Function
Pair and unpair
The remote controller needs to be paired to the receiver to work. Users can pair up to 5 remote controllers to one receiver and each remote controller can be paired to any receiver.
To pair or unpair the remote to the receiver, please operate with the following steps:
- Cut off the power of the receiver and power it on again after more than 5 seconds.
- Press remote and key simultaneously and briefly within 10 seconds after the receiver is powered on.
- Release all keys, then press key within 10 seconds to pair the remote to the receiver.
- To unpair the remote from the receiver, do step 1-2 first, then release all keys and press key within 10 seconds.
Specification
- Working voltage DC 3V, CR2032 battery
- Wireless protocol Umi protocol based on SIG BLE Mesh2.4GHz ISM band
- Frequency band < 7dBm
- Wireless power < 7dBm
- Working temperature – 20-55 C(-4-131 F)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>